Skip to main content

HALL OF FAME 2 リバーブ

Reverb pedal with a pressure-sensitive MASH footswitch, Shimmer effect, TonePrint support and two ¼" inputs and outputs

販売店を探す HALL OF FAME 2 リバーブ (0709-AFS)

Press harder, and the reverb responds.

Tap the footswitch and the reverb turns on. Push down harder and keep holding to bring in MASH. The LED glows brighter as you push, and the assigned parameter rises with the pressure. Release, and the pedal stays on.

Expression under your foot

MASH gives continuous control of a parameter through pressure on the footswitch. Full MASH level needs only 10 kg (around 20 pounds) of pressure. With practice, it becomes as expressive as a wah or volume pedal.

HALL OF FAME 2 リバーブ, image 2 of 4

From spring to shimmer

The type selector covers Room, Hall, Spring, Plate, Church, Mod and Low-Fi. Shimmer pitch shifts the reverb up an octave through each feedback loop. Decay, Tone and Level set the length, brightness and amount, and a Pre-delay switch helps keep presence in heavy reverb.

HALL OF FAME 2 リバーブ, image 3 of 4

Make the pedal your own

Beam TonePrints from the TonePrint app on your smartphone straight into the pedal. With TonePrint Editor on PC or Mac, you can rewire the knobs and assign your own parameter to MASH. The pedal runs in True Bypass by default, with Buffered Bypass optional. Two ¼" inputs accept stereo signals. Two ¼" outputs feed the next device in the signal chain.

HALL OF FAME 2 リバーブ, image 4 of 4