后期制作

 

   
General  
Frame Configuration

Clarity X AES3, Analog, Optical and MADI Ready.With 5.1/7.1 remote control and 3600A Reference Microphone

Front Indicators/Control Status LED: Runnnig, Net, Remote and Sync. IP address reset button.
Finish Black anodized aluminum face plate. Plated steel chassis
Dimensions 19 x 1.75 x 13.2 inches (483 x 44 x 334 mm), 1 RU
Weight 9.0 lbs. (4.7 kg)
Mains Voltage 100 to 240 VAC, 50 to 60 Hz auto-select
Fan High quality fan
Power Consumption 20 W typ
Warranty, Parts and Labor 3 Years
   
EMC  
Complies with EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B
   
Safety  
Certified to IEC 60065, EN 60065, UL 6500 and CSA E65
Environment  
Operating Temperature 32° F to 122° F (0° C to 50° C)
Storage Temperature -22° F to 167° F (-30° C to 70° C)
Humidity Max. 90 % non-condensing
   
Control interface  
Ethernet and TC Icon Remote Control 2 ports, RJ45, 10/100 Mbits/s, Base-T, SNMP-enabled
Clarity X 5.1/7.1 Remote Control RJ45 connector
   
Clarity X 5.1/7.1 Remote Control  
Controls 12 buttons with LEDs, 1 "Valid" LED, 1 high-end potentiometer
Finish Black anodized aluminum face plate. Glass blasted anodized chassis
Dimensions 4.8 x 3.0 x 1.9 inches (122 x 77 x 48 mm)
Weight 0.7 lbs. (0.3 kg)
Max cable length 100 m
   

General Processing  (some features depend on licenses installed and sample rate)

 
Number of Meters 2 x LM8 Loudness Radar Meters, 2 x True-peak Meters, SPL Meter, Dose Meter, Stereo Deviation Meter, Center Ratio Meter 
Input Audio Format 2.0, 5.1, 7.1
Output Speakerset Configuration 44.1-48

7 ch Surround + 0 or 1 Subs (software license required), 5 ch Surround + 0 or 1 Sub, Stereo + 0 to 2 Subs

Output Speakerset Configuration 44.1-96

5 ch Surround + 0 to 2 Subs, Stereo + 0 Subs, Stereo + 0 Subs

Number of Audio Channels Processed 8 in, 8 out
Audio Processing Delay 100 samples, 2.08 ms @ 48 kHz (digital in to digital out)
Adjustable On-line Delay 0 - 1000 msec. Unit: ms, frames 24, 25, 30, 50, 50. Resolution: 1 ms or 0.1 frames
Adjustable Per-Speaker Delay 0 - 100 msec. Resolution: 10 usec
Speaker Calibration Standard EBU R128, SMPTE RP200, ATSC A85
Total Speaker Calibration Precision +/- 0.5 dB
Inter-speaker-channel Calibration Precision +/- 0.05 dB
SPL measurement 48 to 130 dB(A) SPL
Frequency Response DIO DC to 23.9 kHz +/- 0.01 dB
Audio Processing Resolution 40 bit precision, bit transparent
Internal Sample Rates 44.1, 48 kHz & 96 kHz
Internal Clock Precision +/- 30 PPM
External Sample Rates Same as internal +/-1.5 %
Interface Function Synchronous, bit transparent
Digital IO Engine TC developed DICE™ core
Jitter Rejection Engine Upgraded JET™ technology. Based on System 6000
Jitter Tolerance (input) > AES3-2009 (master and slave input)
Jitter Rejection Low-Pass Filter < -3 dB @ 10 Hz, < -100 dB @ 600 Hz, 4th order
Jitter Gain (in-to-out) < 1 dB
Output Jitter (@ clean source) < 1 ns peak, BW : 700 Hz to 100 kHz
   
AES Input / Output  
Connectors D-SUB-25 incl. cable for XLR, 110 Ohm, Yamaha pinout, M2.6mm thread
Number of Channels 16 in, 16 out (for AES channel 9-16, a software license is required)
Formats Supported AES/EBU (24 bit), AES3
Status Bits In: Accepts all, Out: Pro-status bits
Complies with Standards AES3-2009
Digital Output Phase < 0.5 % of sample period
Input Variation Before Sample Slip ±49.9 % of sample period
Input Signal Tolerance 0.2 to 7 Vpp
Output Signal Level 3.3 Vpp ±20 %, terminated
   
TOS Input  
Format  AES/EBU (24 bit), S/PDIF (24 bit), EIAJ CP-340, IEC 60958
Type Optical (Tos-link)
Number of Channels 2
Input Variation Before Sample Slip ±49.9 % of sample period
   
Analog Output  
Connectors D-SUB-25, Yamaha/Tascam pinout, M2.6mm thread
Number of Channels 8 out
Format Ground sensing design
Ouput Impedance 20 Ohm
Full Scale Output Level @ 0 dBFS +12 dBu max, with analog -18 dB DIM
Dynamic Range > 121 dB (incl. -18 dB DIM), unweighted, BW 20-20kHz
THD+N < -99 dB @ 1 kHz, -3 dBFS (@ +12dBu), < -96 dB @ 1 kHz, -3 dBFS (@ -18 dB DIM)
Freq Responce 20 Hz to 20 kHz, +0/-0.2 dB
Crosstalk < -102 dB, 20 Hz to 20 kHz
D to A Conversion 24 bit, 128 x Oversampling Bitstream
D to A Delay 21 samples, 0.44 ms @ 48 kHz
   
Headphones Output  
Connectors 1/4" Phone Jack (stereo)
Format High drive, Impedance Compensating, Short circuit protected 
Output Impedance 3.4 Ohm
Headphones Impedance 8 to 600 Ohm
Full Scale Output Level @ 0 dBFS +21.5, +17.5, +12.5, +6.5 dBu (different headphones impedance settings) 
THD+N < -93 dB @ 1 kHz, -3 dBFS, 275 Ohm load (">275 Ohm" headphones impedance setting)
< -86 dB @ 1 kHz, -3 dBFS, 50 Ohm load ("50 to 300 Ohm" headphones impedance setting)
< -86 dB @ 1 kHz, -3 dBFS, 25 Ohm load ("25 to 100 Ohm" headphones impedance setting)
< -75 dB @ 1 kHz, -3 dBFS, 8 Ohm load ("8 to 50 Ohm" headphones impedance setting)
Dynamic Range > 109 dB, unweighted, BW 20 to 20kHz (all headphones impedance settings) 
Freq. Response +0/-0.2 dB, 20 Hz to 20 kHz
Crosstalk < -102 dB, 20 Hz to 20 kHz
Power 112 mW @ 600 Ohm load (">275 Ohm" headphones impedance setting)
263 mW @ 32 Ohm load ("25 to 100 Ohm" headphones impedance setting)
D to A Conversion 24 bit, 128 x Oversampling Bitstream
D to A Delay 21 samples, 0.44 ms @ 48 kHz
   
Aux Input  
Connectors 1/8" Phone Jack (unbalanced, stereo)
Input Impedance 500 Ohm
Full Scale Input Level @ 0 dBFS +5 dBu
THD+N < -98 dB @ 1 kHz, -3 dBFS
Dynamic Range > 105 dB, unweighted, BW 20 to 20kHz
Freq. Response +0/-0.1 dB, 20 Hz to 20 kHz
Crosstalk < -75 dB, 20 Hz to 20 kHz
A to D Conversion 24 bit, 128 x Oversampling Bitstream
A to D Delay 29 samples, 0.60 ms @ 48 kHz
   
Calibrated Microphone (Included) and Microphone Input  
Model Number TC Electronic, 3600A Reference Microphone. Microphone holder included (5/8" and 3/8")
Characteristic Omni, Random Incident optimized in DSP

System Complies with Standard

IEC 61672 (where applicable)

Cable length:

100 m

 

 
MADI Ready (MADI operation requires software license)  
Connectors 1 BNC In, 1 BNC Through. 75 Ohm
Function Audio input and MADI through
Number of channels 28, 32, 56, 64 in
Samples Rates 44.1, 48 kHz, 96 kHz, no varispeed supported, 96 kHz legacy mode not supported
Complies with Standards AES10-2008 r2014
Digital Output Phase < 0.5 % of sample period
Input Variation Before Sample Slip ± 25 % of sample period
Input Signal Tolerance Complies to AES10-2008 r2014
Output Signal Level Complies to AES10-2008 r2014
   
   
   

Clarity X Licenses

Clarity X - Optional Package

Sign Up to Our Broadcast & Production Newsletter

您的信息

Some of Our Broadcast Users Across the Globe

TC Electronic Broadcast Customers