• Power requirements: +24 V DC
• Current drain: 1 A nominal, 2.5 A power-up current (10 µsec.)
• Display: 7" touch screen 16:9 TFT (800 x 480 pixels) / 9" touch screen 16:9 TFT (1024 x 600 pixels)
• Connectors:
  • 1 x 15-pin Sub-D-F; VGA output with 800 x 480 pixels/1024 x 600 pixels, 65.536 colors, 60 Hz, for connection of an optional external 16:9 VGA monitor, selectable 4:3 mode
  • 1 x 4-pin locking low voltage connector type Binder 710 (DC)
  • 2 x USB A; USB 2.0 Full Speed connectors for USB memory sticks (licence handling, preset export and import, software update) and mouse
  • 1 x GPIO (RJ-11-6P6C, for future use)
  • 1 x LAN (RJ-45)
• Connectors TM7 with
  • 8 analog I + 8 digital I/O (Sub D): 2 x 25-pin Sub-D-F (analog and digital)
  • 8 analog I + 8 digital I/O (BNC): 1 x 25-pin Sub-D-F (analog), 8 x BNC-F (digital)
• Connectors TM9 with
  • 8 analog I + 8 digital I/O (Sub D): 2 x 25-pin Sub-D-F (analog and digital)
  • 8 analog I + 8 digital I/O (BNC): 1 x 25-pin Sub-D-F (analog), 8 x BNC-F (digital)
  • 16 digital I/O (Sub D): 2 x 25-pin Sub-D-F (digital)
  • 16 digital I/O (BNC): 16 x BNC-F (digital)
  • 16 analog I balanced: 2 x 25-pin Sub-D-F (analog)
• Operating temperature TM7/TM9:
  +5° to +45° C

Analog Inputs

• TM7 with 8 analog I + 8 digital I/O (Sub D): 8 analog inputs, Sub-D-F connector, 25-pin

• TM7 with 8 analog I + 8 digital I/O (BNC): 8 analog inputs, Sub-D-F connector, 25-pin

• TM9 with 8 analog I + 8 digital I/O (Sub D): 8 analog inputs, Sub-D-F connector, 25-pin

• TM9 with 8 analog I + 8 digital I/O (BNC): 8 analog inputs, Sub-D-F connector, 25-pin

• TM9 with 16 analog I balanced: 16 analog inputs, 2 Sub-D-F connectors, 25-pin

• Reference level: adjustable in the range from 0 dBu to +10 dBu
• Maximum input level: +24 dBu
• Impedance: > 10 kΩ, electronically balanced
• Frequence range: 20 Hz to 22 kHz @ 48 kHz

• Input sources: analog and/or digital, depending on selected audio interface
• 2-channel Peakmeter: for the defined Stereo channel pair L/R
• Display: Peak level, Peak hold, Numerical value of the display
• Functions: Gain (+20 dB, +40 dB acc. to standard), Peak hold on/off, Memory, Reset

Analog Peakmeter

• Analog scales:
  DIN5: +5 .. -50 dB
  Nordic: +12 .. -42 dB
  BR IIa: 7 .. 1 (British)
  BR IIb: +12 .. -12 dB (British)
• Integration time: acc. to standard or 20 ms, 10 ms, 1 ms, 0,1 ms
• Peak hold indicator: 1, 2, 4, 10, 20, 30 s, manual reset or off

EBU R128 Loudness Mode ITU

ITU BS.1771 Loudness Mode

ATSC A/85 Loudness Mode

Customer Specific Loudness Mode

• Display:
  • Bargraphs for each single channel (can be combined with PPM bargraphs)
  • M bargraph (Momentary - summation of momentary loudness values of all channels for a short span of time)
  • S bargraph (Short - loudness summation value of an adjustable dynamic time frame)
  • I-Bargraph (Integrated - long term loudness value infinite or manual control)
• Numerical display: for Short (S) and Integrated (I) , also (M), labelling adjustable
• Scales: Loudness scale:
  • EBU+9: +9 .. -18 LU
  • EBU+18: +18 .. -36 LU
  • EBU+9a: 14 .. -41 LUFS
  • EBU+18a: -5 .. -59 LUFS
  • EBU0: 0 .. -60 LUFS
  • ITU+9: +9 .. -18 LU (Loudness Units)
  • ITU0: 0 .. -30 LUFS
• Weighting filter: K filter acc. to ITU BS.1770
• Target Level: -23 LUFS; adjustable in the range from -10 to -30 LUFS
• Time & Gate Momentary:
  • Window Time: adjustable in range from 200 ms to 1000 ms in steps of 100 ms
  • Integration Time: IEC 125 ms Fast, 250 ms (IRT), 500 ms, 750 ms, IEC 1000 ms Slow, 1500 ms, 2000 ms, selectable
• Time & Gate Short:
  • Integration Time: 3 s; time window adjustable in the range from 1 to 20 s in steps of 1 s
• Time & Gate Integrated:
  • Silence Gate: -70,0 LUFS; adjustable in the range from -80,0 LUFS to -40,0 LUFS in steps of 0.5-LUFS, detachable
  • Relative Gate: -8,0 LU; adjustable in the range from -40,0 LU to 0 LU in steps of 0.5-LU, detachable
  • Time: 1 hour; 1 minute to 7 days 23 hours 59 minutes adjustable
• Level summation: adjustable

Spectrum Analyzer (RTA)

• Input sources: selectable: all channels without LF, all channels, Front, Rear, L/R, single channels, Stereo pairs, depending on selected mode
• Frequency range:
  • Norm: 20 Hz to 20 kHz, additional band > 20 kHz switchable
  • LF: 5 Hz to 5 kHz
• Number of bands:
  • 1/3-octave: 31 bands, filter acc. to IEC 225 class 2
  • 1/6-octave: 61 bands
• Weighting filter: Linear; Linear, A, C selectable
• Peak hold indicator: 1 s, 2 s, 4 s, 10 s, 20 s, 30 s, manual reset or off
• Measuring range: 45 dB max.
• Scaling: 3, 6, 9 dB
• Functions:
  • Input selection
  • Peak hold on/off
  • A, C, Linear weighting
  • Integration time
  • Set reference
  • Scaling
  • Frequency range
  • Bargraph arrangement
  • Display-Hold
• Integration time (ballistics): Impulse, Fast, Slow, Peak (10 ms)

Surround-Sound-Analyzer

• Display:
  • Graphical display indicating the single channel and total program loudness acc. to selected weighting filter (Total Volume Indicator) acc. to selected weighting filters (e. g. SPL or Loudness)
  • Position and width of phantom sound sources (PSI)
  • Correlation of adjacent channels in PSI (color) resp. TVI (shape of line): red resp. funnel: negative range, yellow resp. straight line: "0" range, green resp. roof: positive range
  • Separate correlators for the outer adjacent channels switchable: red: negative range, white: "0" range, green: positive range
  • Dominance indicator (DMI)

Radar Loudness Meter

• Display:
  • Momentary Loudness values (circular)
  • History (circular)
  • Measuring time (numerical)
  • 2 Loudness descriptors (numerical)
  • Peak
• Mode: Radar or Statistics
• Sliding Loudness: 3 s, 6 s, 10 s, 15 s, 30 s, 1 min, 2 min, 4 min, 8 min
• Descriptors: Off, Program Loudness, Loudness Max, Loudness Range, Sliding Loudness (max. 2 at a time)
• Speed: 1 min, 4 min, 12 min, 30 min, 1 h, 2 h, 4 h, 12 h, 24 h
• Resolution: 3 dB, 4 dB, 6 dB, 8 dB, 10 dB, 12 dB, selectable
• Low Level: -30 to -6 LU

General

• Input sources: analog and/or digital, depending on selected audio interface
• Display:
  • Peak level
  • Peak hold
  • Numerical value of the display
  • Digital Over
  • Gain (+20 dB, +40 dB acc. to standard)
  • Peak hold on/off
  • Memory
  • Reset

Analog Peakmeter Extension

• Analog scales:
  • Zoom10: +10 .. -10
  • Zoom1: +1 .. -1
  • SMPTE24: +24 .. -30
  • SMPTE20: +20 .. -40
  • NHK
• Integration time: acc. to standard or 20 ms, 10 ms, 1 ms, 0,1 ms
• Peak hold indicator: 1, 2, 4, 10, 20, 30 s, manual reset or off