Technical Specifications
Max. Input Level (XLR) |
 |
+22 dBu |
|
Max. Output Level (XLR) |
|
+22 dBu |
|
Max. Input Level (Jack) |
|
+14 dBu |
|
Max. Output Level (Jack) |
|
+10 dBu |
|
Input Impedance (Jack/XLR) |
|
1 MOhm unbal. / 20 kOhm bal. |
|
Output Impedance (Jack/XLR) |
|
750 Ohm unbal./ 50 Ohm Electronically bal. |
|
Frequency Response |
|
20-20 kHz, +0 / -0.5 dB, 25 kHz, -3dB |
|
Total Harmonic Dist. |
|
< 0.05% 1 kHz, 0 dBm |
|
Dynamic Range |
|
>100 dB |
|
Group Delay |
|
<30 microseconds |
|
Delay Resolution |
|
0.1 mSec to 999.9 mSec. then 1 mSec |
|
Digital-Conversion |
|
Dynamic Differential Delta Sigma |
|
Sampling Rate |
|
1 MHz, no downsampling used |
|
Operating Temperature |
|
32° to 122° (0°C to 50°C) |
|
Storage Temperature |
|
-22°F to 167°F (30°C to 70°C) |
|
Shipping Weight |
|
12 lbs (5.7 kg) |
|
Net Weight |
|
19 lbs (6.4 kg) |
|
Input/Output |
|
1/4" Phone & XLR |
|
Rear Panel Control |
|
Assign Switch and TC LINK or TC 0144 Serial Jack |
|
MIDI |
|
In/Thru/Out |
|
Input Gain |
|
Adjusts input gain ± 10 dB |
|
Input Level |
|
PPM 5 section LED input meter labeled to indicate: -20, 10,-3,0,+3 |
|
Bypass |
|
Single control electronic bypass, Non-volatile memory function |
|
Feedback Controls |
|
Low Pass at 8, 4, 2 kHz,Hi Pass at 100, 200, 400 Hz Level in % and Phase inversion of feedback |
|
Output Volume |
|
Delay, Direct, Delay + Direct, location of same in L &R outputs, phase invertion of Delay |
|
Modulation Controls |
|
Individual control for Delay, Pan & Dynamic. |
|
Waveforms |
|
Sine, Random, Envelope & Trig |
|
Pan Section |
|
Panning of direct signal, Delay signal or both |
|
Dyn Section |
|
Enables Gating, Ducking, Sampling and Auto Trig |
|
Delay Time |
|
Multi function 4 digit display reads Delay Time and Special Function Values |
|
Delay Up-Down |
|
Scroll buttons for adjusting Delay time |
|
Learn |
|
Tap in Delay times, start/stop of sample |
|
Keyboard |
|
Numeric Keypad for parameter entry |
|
Preset |
|
Enters Preset mode |
|
Store |
|
Stores updated preset |
|
Keys A & B |
|
Programmable "Soft Keys" Sets record mode and edit points in sample mode |
|
Channel & Enable |
|
MIDI Channel & MIDI in enable |
|
Change |
|
Enables External Effects Loop mode |
|
Spec |
|
Enters Special Key Function Mode |
|
Power |
|
Front panel on/off switch |
|
Parts and Labor |
|
1 year |
|
Power Requirements |
|
Selectable: 100/120/ 220/ 240V, 50-60 Hz, 30W |
|
Dimensions |
|
3 1/2 x 19 x 9.5 inches (89 x 482 x 242 mm) |
|
Finish |
|
Black anodized aluminum face
Black painted steel chassis |
|
|
|
|
 |
Radar Loudness Meter for Native DAWs
Our acclaimed radar display has long proven an efficient solution when upgrading audio production for broadcast, film and music from unsatisfactory peak level indicators to loudness-based metering. LM6 Radar Loudness Meter gives you direct access to this revolutionary meter whether you are using Media Composer, Final Cut Pro, Pro Tools, Logic Pro, Nuendo, Wavelab, Sequoia, etc. on a Mac or PC and whether your productions are in mono, stereo or 5.1.
|
Click here to find a TC Electronic dealer near you |
Radar Meter Bundle for Pro Tools | HD
Radar Meter Bundle for Pro Tools HD is a complete loudness meter package that is perfect for all post and production studios whether they deliver for broadcast or cinema.
Radar Meter Bundle is a free upgrade for existing LM5D users.
Please note that the iLok license is named "LM5D".
|
TC Equips New DR Building
DR chose the Dynaudio Acoustics AIR series as the standard monitoring setup in all sound and video editing suites.
|
|
.jpg)
.jpg)
