Support

Software

Software by Product

  • Impact Twin

    Software

    + Show version history + Hide version history
    Changes in version 3.0.0

    • Various Control Panel and Plug-in fixes for all platforms

    • Conflict with PowerCore Fabriks solved
    • Various audio and MIDI driver related stability, performance and latency improvements

    • Various Installation related issues fixed

    • OSX Specific

      • OSX 10.8 Mountain Lion compatibility
      • PPC support dropped
      • Uninstaller included

    • Windows Specific

      • DPC spike checker tool included

    Changes in version 2.5.1

    VERSION 2.5.1 REVISION 6962 FOR MAC

    New Audio Driver: Version 3.5.6

    Supports OSX 10.5.x, 10.6.x and 10.7.x

    • Lion compatible
    • Improvements in regards to general stability and performanceWhen loading Pro Tools 9 projects that used different sample rates, the driver would sometimes not switch to the correct sample rate or Pro Tools 9 would complain of a sample rate mismatch
    • A device that was detached from the computer could remain listed in Audio MIDI Setup
    • A device could sometimes appear in Audio MIDI Setup with 0 input channels and would require a reboot to restore functionality
    Changes in version 2.5

    VERSION 2.5.0 REVISION 6906 FOR MAC AND PC

    • Fixes for Studio Konnekt 48 Control Panel (remove channels)
    • 64 bit PrefPane (MAC)

    VERSION 2.5.0 REVISION 6895 FOR MAC AND PC

    MAC Driver: Version 3.5.3

    • Supports 10.5.x and 10.6.x

    New PC Driver: Version 3.5.3

    • Support Windows XP/Vista/7, 32 and 64 bit

    New driver for PC (3.5.3 replaces 3.5.0):

    • A rare BSOD could occur when receiving MIDI input data
    • The driver could exhibit audio dropouts and large spikes of CPU usage on some Windows 7 systems
    • On Windows 7, the "Safe Mode Level 1 - 3" Operation Modes are now better at allowing the driver to operate on a system with a high DPC latency (at the expense of additional audio latency). The minimum ASIO buffer size has increased when using one of the Safe Modes on Windows 7
    • The Control Panel's System tab now reports more details about the system configuration and an OHCI chipset's capabilities
    • A BSOD could occur when changing WDM settings with certain WDM channel mapping configurations.
    • A workaround has been added to avoid an intermittent BSOD that could occur in Microsoft's new 1394 OHCI bus driver on Windows 7 64-bit systems with a quad-core processor
    • A BSOD could occur because of an error in the driver's WDM channel mapping logic.
    • A BSOD could occur when attempting to view the WDM Microphone's properties
    • The driver's clock synchronization logic has been improved
    • A rare BSOD could occur when an ASIO host application was opening its connection to the driver
    • The ASIO driver now reports the correct digital latency on Windows 7
    • Improved streaming performance on systems with 4GB or more of RAM installed
    • Improved ASIO performance when using small buffer sizes on Windows XP or Vista

    MAC Installer:

    • To avoid confusion, "Control Panel & Drivers" is now always ticked of

    Control Panel

    • SK48: +4 switch was inversed. Fixed
    • On rare occasions, the Studio Konnekt 48 Mixer would collaps. FixedOn rare occasions, the Studio Konnekt 48 mixers internal data structure would corrupt. Fixed

    Firmware:

    • Impact Twin: In some cases MIDI was not available. Fixed

    VERSION 2.5.0 (R6886) FOR MAC

    MAC Driver: Version 3.5.3

    Supports 10.5.x/10.6.x
    • The driver has been updated to include Mac OS X 10.6 "Snow Leopard" 64-bit driver support.
    • If a device was attached while certain applications were active (iTunes and applications that use QuickTime, including web browsers), the CPU usage would increase and these applications' audio playback could become distorted.
    • The uninstaller application would not correctly detect and uninstall the driver on a Mac running OS X 10.6 if the driver had been installed before the Mac was upgraded to Mac OS X 10.6.
    • If the user's language was set to a non-English language, MIDI could
    • Channel names were not displayed in Audio MIDI Setup's speaker configuration window
    • The driver could fail to load at system bootup with a device attached
    • The driver would hang when used with a device that used a large channel count and a particular channel configuration
    • A Kernel Panic could occur in low memory conditions
    • MIDI output is now more accurately aligned with the audio
    • The driver will now ignore any devices that are not on the same firewire bus as the master device
    • Using large Core Audio buffer sizes on PowerPC Macs would often result in audio glitches
    • The driver's streaming engine has been improved to minimize CPU usage
    • Audio could become silent or distorted if other real time processes delayed the driver's streaming engine from processing its FireWire audio
    • The driver is now much faster at reconfiguring its streaming engine, for instance after selecting a new sample rate
    • When loading Cubase projects that used different sample rates, the driver would sometimes not switch to the correct sample rate
    • After attaching a device for the first time, a device could sometimes appear in Audio MIDI Setup with 0 input channels and 0 output channels and could not be used for audio input or output. The workaround was to toggle the sample rate or clock source to get it to be republished correctly
    • On rare occasions, the driver could hang when a device was removed
    • In the Control Panel application's Event Log window, the device lock changed bits were displayed in reverse order
    • The driver's streaming engine would unnecessarily restart twice when a device's channel configuration would change because of a change to the sample rate
    • The driver's clock synchronization logic has been improved
    • A device's nickname could become corrupted when it was shortened
    • On rare occasions, a device's nickname would not be restored correctly after a system power-cycle

    Control Panel

    • SK48: +4 switch was inversed. Fixed.

    Firmware:

    • Impact Twin: In some cases MIDI was not available. Fixed
    Changes in version 2.4.1

    VERSION 2.4.1 FINAL (R6489) PC

    • With some setups, Assimilator, ResFilter, M40 and Integrator was disabled. Fixed.

    VERSION 2.4.1 FINAL (R6468) MAC & (6457) PC

    PC: Driver 3.5.0

    • Minor modifications of the installer

    Mac: Driver 3.4.2

    • Issues when updating the driver from previous versions. FIXED

    VERSION 2.4.1 RC 2 (R6426) MAC & (6411) PC

    PC: Driver 3.5.0

    • The link placed at the desktop was pointing to a wrong location if the user was installing at a non-default location
    • There was no link to the control panel from Windows start menu
    • An update alert was unintendedly shown at CPL startup if the user was installing at a non-default location
    • The option to add a link to the Quick Launch bar has been re-enabled. Beware that this option does not work with Windows 7

    Mac: Driver 3.4.2

    • Smaller adjustments to the installer

    VERSION 2.4.1 (R6376) MAC & PC

    New driver for PC:
    Driver 3.5.0

    • The driver's performance on a system with high DPC latencies has been improved
    • On Windows 7 64-bit, Microsoft's new 1394 stack would sometimes fail to deallocate the isochronous bandwidth, requiring a system restart to restore the driver's functionality
    • A BSOD could occur on multi-processor/core systems when the audio streaming configuration was changed or when it recovered from a dropout
    • On Windows 7, the driver's minimum buffer size was not reported correctly
    • An ASIO host application's audio could become distorted after a large DPC latency spike occurred on the system
    • After putting a Windows 7 system to sleep, Microsoft's new 1394 stack was causing the driver to hang when the system was resumed
    • When using stacked devices, the order of the ASIO input channels could be flipped depending on the order that the devices were attached
    • ASIO streaming performance on Windows 7 has been improved
    • WDM input routing now works as expected

    Firmware:
    Impact Twin Firmware 1.07 included

    • An unintended raise in level occured when switching the Compressor/De-esser on/off, much more smooth now.

    Installer:

    • In some occasions, updating from older versions would fail, resulting in the device not being recognized
    • Impact Twin added to the installer
    • New versions of M40 Reverb, ResFilter and Assimilator added to the installer. These versions will run with all TC Audio Interfaces
    Changes in version

    Latest version

    Impact Twin Software Mac - Version 3.0.0 - 32 MB
    Released: Monday, February 25, 2013
    Note: Supports Mointain Lion (10.8), Lion (10.7) and Snow Leopard (10.6)
    Impact Twin Software Windows - Version 3.0.0 - 20 MB
    Released: Monday, February 25, 2013
    Note: Supports Windows Vista, Windows 7 and Windows 8 64bit
    Impact Twin Software Windows - Version 3.0.0 - 19 MB
    Released: Monday, February 25, 2013
    Note: Supports Windows XP-SP3, Windows Vista, Windows 7 and Windows 8 32 bit

    Previous version

    + Show previous versions - Hide previous versions
    Impact Twin Software Mac - Version 2.5.1 - 36 MB
    Released: Thursday, September 30, 2010
    Note: For OS X 10.5 Leopard (with 32bit PPC and Intel kernel), OS X 10.6 Snow Leopard (with 32bit and 64bit Intel kernel), OS X 10.7 Lion (with 32bit and 64bit Intel kernel)
    Impact Twin Software Windows - Version 2.5 - 21 MB
    Released: Thursday, September 30, 2010
    Note: Windows 64 bit
    Impact Twin Software Windows - Version 2.5 - 21 MB
    Released: Thursday, September 30, 2010
    Note: Windows 32 bit
    Impact Twin Software Windows - Version 2.4.1 - 44 MB
    Released: Wednesday, March 03, 2010
    Impact Twin Software Mac - Version 2.4.1 - 35 MB
    Released: Wednesday, March 03, 2010

  • Studio Konnekt 48

    Software

    + Show version history + Hide version history
    Changes in version 3.0.0

    • Various Control Panel and Plug-in fixes for all platforms

    • Conflict with PowerCore Fabriks solved
    • Various audio and MIDI driver related stability, performance and latency improvements

    • Various Installation related issues fixed

    • OSX Specific

      • OSX 10.8 Mountain Lion compatibility
      • PPC support dropped
      • Uninstaller included

    • Windows Specific

      • DPC spike checker tool included

    Changes in version 2.5.1

    VERSION 2.5.1 REVISION 6962 FOR MAC

    New Audio Driver: Version 3.5.6

    Supports OSX 10.5.x, 10.6.x and 10.7.x

    • Lion compatible
    • Improvements in regards to general stability and performanceWhen loading Pro Tools 9 projects that used different sample rates, the driver would sometimes not switch to the correct sample rate or Pro Tools 9 would complain of a sample rate mismatch
    • A device that was detached from the computer could remain listed in Audio MIDI Setup
    • A device could sometimes appear in Audio MIDI Setup with 0 input channels and would require a reboot to restore functionality
    Changes in version 2.5

    VERSION 2.5.0 REVISION 6906 FOR MAC AND PC

    • Fixes for Studio Konnekt 48 Control Panel (remove channels)
    • 64 bit PrefPane (MAC)

    VERSION 2.5.0 REVISION 6895 FOR MAC AND PC

    MAC Driver: Version 3.5.3

    • Supports 10.5.x and 10.6.x

    New PC Driver: Version 3.5.3

    • Support Windows XP/Vista/7, 32 and 64 bit

    New driver for PC (3.5.3 replaces 3.5.0):

    • A rare BSOD could occur when receiving MIDI input data
    • The driver could exhibit audio dropouts and large spikes of CPU usage on some Windows 7 systems
    • On Windows 7, the "Safe Mode Level 1 - 3" Operation Modes are now better at allowing the driver to operate on a system with a high DPC latency (at the expense of additional audio latency). The minimum ASIO buffer size has increased when using one of the Safe Modes on Windows 7
    • The Control Panel's System tab now reports more details about the system configuration and an OHCI chipset's capabilities
    • A BSOD could occur when changing WDM settings with certain WDM channel mapping configurations.
    • A workaround has been added to avoid an intermittent BSOD that could occur in Microsoft's new 1394 OHCI bus driver on Windows 7 64-bit systems with a quad-core processor
    • A BSOD could occur because of an error in the driver's WDM channel mapping logic.
    • A BSOD could occur when attempting to view the WDM Microphone's properties
    • The driver's clock synchronization logic has been improved
    • A rare BSOD could occur when an ASIO host application was opening its connection to the driver
    • The ASIO driver now reports the correct digital latency on Windows 7
    • Improved streaming performance on systems with 4GB or more of RAM installed
    • Improved ASIO performance when using small buffer sizes on Windows XP or Vista

    MAC Installer:

    • To avoid confusion, "Control Panel & Drivers" is now always ticked of

    Control Panel

    • SK48: +4 switch was inversed. Fixed
    • On rare occasions, the Studio Konnekt 48 Mixer would collaps. FixedOn rare occasions, the Studio Konnekt 48 mixers internal data structure would corrupt. Fixed

    Firmware:

    • Impact Twin: In some cases MIDI was not available. Fixed

    VERSION 2.5.0 (R6886) FOR MAC

    MAC Driver: Version 3.5.3

    Supports 10.5.x/10.6.x
    • The driver has been updated to include Mac OS X 10.6 "Snow Leopard" 64-bit driver support.
    • If a device was attached while certain applications were active (iTunes and applications that use QuickTime, including web browsers), the CPU usage would increase and these applications' audio playback could become distorted.
    • The uninstaller application would not correctly detect and uninstall the driver on a Mac running OS X 10.6 if the driver had been installed before the Mac was upgraded to Mac OS X 10.6.
    • If the user's language was set to a non-English language, MIDI could
    • Channel names were not displayed in Audio MIDI Setup's speaker configuration window
    • The driver could fail to load at system bootup with a device attached
    • The driver would hang when used with a device that used a large channel count and a particular channel configuration
    • A Kernel Panic could occur in low memory conditions
    • MIDI output is now more accurately aligned with the audio
    • The driver will now ignore any devices that are not on the same firewire bus as the master device
    • Using large Core Audio buffer sizes on PowerPC Macs would often result in audio glitches
    • The driver's streaming engine has been improved to minimize CPU usage
    • Audio could become silent or distorted if other real time processes delayed the driver's streaming engine from processing its FireWire audio
    • The driver is now much faster at reconfiguring its streaming engine, for instance after selecting a new sample rate
    • When loading Cubase projects that used different sample rates, the driver would sometimes not switch to the correct sample rate
    • After attaching a device for the first time, a device could sometimes appear in Audio MIDI Setup with 0 input channels and 0 output channels and could not be used for audio input or output. The workaround was to toggle the sample rate or clock source to get it to be republished correctly
    • On rare occasions, the driver could hang when a device was removed
    • In the Control Panel application's Event Log window, the device lock changed bits were displayed in reverse order
    • The driver's streaming engine would unnecessarily restart twice when a device's channel configuration would change because of a change to the sample rate
    • The driver's clock synchronization logic has been improved
    • A device's nickname could become corrupted when it was shortened
    • On rare occasions, a device's nickname would not be restored correctly after a system power-cycle

    Control Panel

    • SK48: +4 switch was inversed. Fixed.

    Firmware:

    • Impact Twin: In some cases MIDI was not available. Fixed
    Changes in version 2.4.1

    VERSION 2.4.1 FINAL (R6489) PC

    • With some setups, Assimilator, ResFilter, M40 and Integrator was disabled. Fixed.

    VERSION 2.4.1 FINAL (R6468) MAC & (6457) PC

    PC: Driver 3.5.0

    • Minor modifications of the installer

    Mac: Driver 3.4.2

    • Issues when updating the driver from previous versions. FIXED

    VERSION 2.4.1 RC 2 (R6426) MAC & (6411) PC

    PC: Driver 3.5.0

    • The link placed at the desktop was pointing to a wrong location if the user was installing at a non-default location
    • There was no link to the control panel from Windows start menu
    • An update alert was unintendedly shown at CPL startup if the user was installing at a non-default location
    • The option to add a link to the Quick Launch bar has been re-enabled. Beware that this option does not work with Windows 7

    Mac: Driver 3.4.2

    • Smaller adjustments to the installer

    VERSION 2.4.1 (R6376) MAC & PC

    New driver for PC:
    Driver 3.5.0

    • The driver's performance on a system with high DPC latencies has been improved
    • On Windows 7 64-bit, Microsoft's new 1394 stack would sometimes fail to deallocate the isochronous bandwidth, requiring a system restart to restore the driver's functionality
    • A BSOD could occur on multi-processor/core systems when the audio streaming configuration was changed or when it recovered from a dropout
    • On Windows 7, the driver's minimum buffer size was not reported correctly
    • An ASIO host application's audio could become distorted after a large DPC latency spike occurred on the system
    • After putting a Windows 7 system to sleep, Microsoft's new 1394 stack was causing the driver to hang when the system was resumed
    • When using stacked devices, the order of the ASIO input channels could be flipped depending on the order that the devices were attached
    • ASIO streaming performance on Windows 7 has been improved
    • WDM input routing now works as expected

    Firmware:
    Impact Twin Firmware 1.07 included

    • An unintended raise in level occured when switching the Compressor/De-esser on/off, much more smooth now.

    Installer:

    • In some occasions, updating from older versions would fail, resulting in the device not being recognized
    • Impact Twin added to the installer
    • New versions of M40 Reverb, ResFilter and Assimilator added to the installer. These versions will run with all TC Audio Interfaces
    Changes in version

    Latest version

    Studio Konnekt 48 Software Mac - Version 3.0.0 - 32 MB
    Released: Monday, February 25, 2013
    Note: Supports Mointain Lion (10.8), Lion (10.7) and Snow Leopard (10.6)
    Studio Konnekt 48 Software Windows - Version 3.0.0 - 20 MB
    Released: Monday, February 25, 2013
    Note: Supports Windows Vista, Windows 7 and Windows 8 64bit
    Studio Konnekt 48 Software Windows - Version 3.0.0 - 19 MB
    Released: Monday, February 25, 2013
    Note: Supports Windows XP-SP3, Windows Vista, Windows 7 and Windows 8 32 bit

    Previous version

    + Show previous versions - Hide previous versions
    Studio Konnekt 48 Software Mac - Version 2.5.1 - 36 MB
    Released: Thursday, September 30, 2010
    Note: For OS X 10.5 Leopard (with 32bit PPC and Intel kernel), OS X 10.6 Snow Leopard (with 32bit and 64bit Intel kernel), OS X 10.7 Lion (with 32bit and 64bit Intel kernel)
    Studio Konnekt 48 Software Windows - Version 2.5 - 21 MB
    Released: Thursday, September 30, 2010
    Note: Windows 64 bit
    Studio Konnekt 48 Software Windows - Version 2.5 - 21 MB
    Released: Thursday, September 30, 2010
    Note: Windows 32 bit
    Studio Konnekt 48 Software Windows - Version 2.4.1 - 44 MB
    Released: Wednesday, March 03, 2010
    Studio Konnekt 48 Software Mac - Version 2.4.1 - 35 MB
    Released: Wednesday, March 03, 2010

  • Desktop Konnekt 6

    Software

    + Show version history + Hide version history
    Changes in version 3.0.0

    • Various Control Panel and Plug-in fixes for all platforms

    • Conflict with PowerCore Fabriks solved
    • Various audio and MIDI driver related stability, performance and latency improvements

    • Various Installation related issues fixed

    • OSX Specific

      • OSX 10.8 Mountain Lion compatibility
      • PPC support dropped
      • Uninstaller included

    • Windows Specific

      • DPC spike checker tool included

    Changes in version 2.5.1

    VERSION 2.5.1 REVISION 6962 FOR MAC

    New Audio Driver: Version 3.5.6

    Supports OSX 10.5.x, 10.6.x and 10.7.x

    • Lion compatible
    • Improvements in regards to general stability and performanceWhen loading Pro Tools 9 projects that used different sample rates, the driver would sometimes not switch to the correct sample rate or Pro Tools 9 would complain of a sample rate mismatch
    • A device that was detached from the computer could remain listed in Audio MIDI Setup
    • A device could sometimes appear in Audio MIDI Setup with 0 input channels and would require a reboot to restore functionality
    Changes in version 2.5

    VERSION 2.5.0 REVISION 6906 FOR MAC AND PC

    • Fixes for Studio Konnekt 48 Control Panel (remove channels)
    • 64 bit PrefPane (MAC)

    VERSION 2.5.0 REVISION 6895 FOR MAC AND PC

    MAC Driver: Version 3.5.3

    • Supports 10.5.x and 10.6.x

    New PC Driver: Version 3.5.3

    • Support Windows XP/Vista/7, 32 and 64 bit

    New driver for PC (3.5.3 replaces 3.5.0):

    • A rare BSOD could occur when receiving MIDI input data
    • The driver could exhibit audio dropouts and large spikes of CPU usage on some Windows 7 systems
    • On Windows 7, the "Safe Mode Level 1 - 3" Operation Modes are now better at allowing the driver to operate on a system with a high DPC latency (at the expense of additional audio latency). The minimum ASIO buffer size has increased when using one of the Safe Modes on Windows 7
    • The Control Panel's System tab now reports more details about the system configuration and an OHCI chipset's capabilities
    • A BSOD could occur when changing WDM settings with certain WDM channel mapping configurations.
    • A workaround has been added to avoid an intermittent BSOD that could occur in Microsoft's new 1394 OHCI bus driver on Windows 7 64-bit systems with a quad-core processor
    • A BSOD could occur because of an error in the driver's WDM channel mapping logic.
    • A BSOD could occur when attempting to view the WDM Microphone's properties
    • The driver's clock synchronization logic has been improved
    • A rare BSOD could occur when an ASIO host application was opening its connection to the driver
    • The ASIO driver now reports the correct digital latency on Windows 7
    • Improved streaming performance on systems with 4GB or more of RAM installed
    • Improved ASIO performance when using small buffer sizes on Windows XP or Vista

    MAC Installer:

    • To avoid confusion, "Control Panel & Drivers" is now always ticked of

    Control Panel

    • SK48: +4 switch was inversed. Fixed
    • On rare occasions, the Studio Konnekt 48 Mixer would collaps. FixedOn rare occasions, the Studio Konnekt 48 mixers internal data structure would corrupt. Fixed

    Firmware:

    • Impact Twin: In some cases MIDI was not available. Fixed

    VERSION 2.5.0 (R6886) FOR MAC

    MAC Driver: Version 3.5.3

    Supports 10.5.x/10.6.x
    • The driver has been updated to include Mac OS X 10.6 "Snow Leopard" 64-bit driver support.
    • If a device was attached while certain applications were active (iTunes and applications that use QuickTime, including web browsers), the CPU usage would increase and these applications' audio playback could become distorted.
    • The uninstaller application would not correctly detect and uninstall the driver on a Mac running OS X 10.6 if the driver had been installed before the Mac was upgraded to Mac OS X 10.6.
    • If the user's language was set to a non-English language, MIDI could
    • Channel names were not displayed in Audio MIDI Setup's speaker configuration window
    • The driver could fail to load at system bootup with a device attached
    • The driver would hang when used with a device that used a large channel count and a particular channel configuration
    • A Kernel Panic could occur in low memory conditions
    • MIDI output is now more accurately aligned with the audio
    • The driver will now ignore any devices that are not on the same firewire bus as the master device
    • Using large Core Audio buffer sizes on PowerPC Macs would often result in audio glitches
    • The driver's streaming engine has been improved to minimize CPU usage
    • Audio could become silent or distorted if other real time processes delayed the driver's streaming engine from processing its FireWire audio
    • The driver is now much faster at reconfiguring its streaming engine, for instance after selecting a new sample rate
    • When loading Cubase projects that used different sample rates, the driver would sometimes not switch to the correct sample rate
    • After attaching a device for the first time, a device could sometimes appear in Audio MIDI Setup with 0 input channels and 0 output channels and could not be used for audio input or output. The workaround was to toggle the sample rate or clock source to get it to be republished correctly
    • On rare occasions, the driver could hang when a device was removed
    • In the Control Panel application's Event Log window, the device lock changed bits were displayed in reverse order
    • The driver's streaming engine would unnecessarily restart twice when a device's channel configuration would change because of a change to the sample rate
    • The driver's clock synchronization logic has been improved
    • A device's nickname could become corrupted when it was shortened
    • On rare occasions, a device's nickname would not be restored correctly after a system power-cycle

    Control Panel

    • SK48: +4 switch was inversed. Fixed.

    Firmware:

    • Impact Twin: In some cases MIDI was not available. Fixed
    Changes in version 2.4.1

    VERSION 2.4.1 FINAL (R6489) PC

    • With some setups, Assimilator, ResFilter, M40 and Integrator was disabled. Fixed.

    VERSION 2.4.1 FINAL (R6468) MAC & (6457) PC

    PC: Driver 3.5.0

    • Minor modifications of the installer

    Mac: Driver 3.4.2

    • Issues when updating the driver from previous versions. FIXED

    VERSION 2.4.1 RC 2 (R6426) MAC & (6411) PC

    PC: Driver 3.5.0

    • The link placed at the desktop was pointing to a wrong location if the user was installing at a non-default location
    • There was no link to the control panel from Windows start menu
    • An update alert was unintendedly shown at CPL startup if the user was installing at a non-default location
    • The option to add a link to the Quick Launch bar has been re-enabled. Beware that this option does not work with Windows 7

    Mac: Driver 3.4.2

    • Smaller adjustments to the installer

    VERSION 2.4.1 (R6376) MAC & PC

    New driver for PC:
    Driver 3.5.0

    • The driver's performance on a system with high DPC latencies has been improved
    • On Windows 7 64-bit, Microsoft's new 1394 stack would sometimes fail to deallocate the isochronous bandwidth, requiring a system restart to restore the driver's functionality
    • A BSOD could occur on multi-processor/core systems when the audio streaming configuration was changed or when it recovered from a dropout
    • On Windows 7, the driver's minimum buffer size was not reported correctly
    • An ASIO host application's audio could become distorted after a large DPC latency spike occurred on the system
    • After putting a Windows 7 system to sleep, Microsoft's new 1394 stack was causing the driver to hang when the system was resumed
    • When using stacked devices, the order of the ASIO input channels could be flipped depending on the order that the devices were attached
    • ASIO streaming performance on Windows 7 has been improved
    • WDM input routing now works as expected

    Firmware:
    Impact Twin Firmware 1.07 included

    • An unintended raise in level occured when switching the Compressor/De-esser on/off, much more smooth now.

    Installer:

    • In some occasions, updating from older versions would fail, resulting in the device not being recognized
    • Impact Twin added to the installer
    • New versions of M40 Reverb, ResFilter and Assimilator added to the installer. These versions will run with all TC Audio Interfaces
    Changes in version

    Latest version

    Desktop Konnekt 6 Software Mac - Version 3.0.0 - 32 MB
    Released: Monday, February 25, 2013
    Note: Supports Mointain Lion (10.8), Lion (10.7) and Snow Leopard (10.6)
    Desktop Konnekt 6 Software Windows - Version 3.0.0 - 20 MB
    Released: Monday, February 25, 2013
    Note: Supports Windows Vista, Windows 7 and Windows 8 64bit
    Desktop Konnekt 6 Software Windows - Version 3.0.0 - 19 MB
    Released: Monday, February 25, 2013
    Note: Supports Windows XP-SP3, Windows Vista, Windows 7 and Windows 8 32 bit

    Previous version

    + Show previous versions - Hide previous versions
    Desktop Konnekt 6 Software Mac - Version 2.5.1 - 36 MB
    Released: Thursday, September 30, 2010
    Note: For OS X 10.5 Leopard (with 32bit PPC and Intel kernel), OS X 10.6 Snow Leopard (with 32bit and 64bit Intel kernel), OS X 10.7 Lion (with 32bit and 64bit Intel kernel)
    Desktop Konnekt 6 Software Windows - Version 2.5 - 21 MB
    Released: Thursday, September 30, 2010
    Note: Windows 64 bit
    Desktop Konnekt 6 Software Windows - Version 2.5 - 21 MB
    Released: Thursday, September 30, 2010
    Note: Windows 32 bit
    Desktop Konnekt 6 Software Windows - Version 2.4.1 - 44 MB
    Released: Wednesday, March 03, 2010
    Desktop Konnekt 6 Software Mac - Version 2.4.1 - 35 MB
    Released: Wednesday, March 03, 2010

  • Digital Konnekt x32

    Software

    + Show version history + Hide version history
    Changes in version 3.0.0

    • Various Control Panel and Plug-in fixes for all platforms

    • Conflict with PowerCore Fabriks solved
    • Various audio and MIDI driver related stability, performance and latency improvements

    • Various Installation related issues fixed

    • OSX Specific

      • OSX 10.8 Mountain Lion compatibility
      • PPC support dropped
      • Uninstaller included

    • Windows Specific

      • DPC spike checker tool included

    Changes in version 2.5.1

    VERSION 2.5.1 REVISION 6962 FOR MAC

    New Audio Driver: Version 3.5.6

    Supports OSX 10.5.x, 10.6.x and 10.7.x

    • Lion compatible
    • Improvements in regards to general stability and performanceWhen loading Pro Tools 9 projects that used different sample rates, the driver would sometimes not switch to the correct sample rate or Pro Tools 9 would complain of a sample rate mismatch
    • A device that was detached from the computer could remain listed in Audio MIDI Setup
    • A device could sometimes appear in Audio MIDI Setup with 0 input channels and would require a reboot to restore functionality
    Changes in version 2.5

    VERSION 2.5.0 REVISION 6906 FOR MAC AND PC

    • Fixes for Studio Konnekt 48 Control Panel (remove channels)
    • 64 bit PrefPane (MAC)

    VERSION 2.5.0 REVISION 6895 FOR MAC AND PC

    MAC Driver: Version 3.5.3

    • Supports 10.5.x and 10.6.x

    New PC Driver: Version 3.5.3

    • Support Windows XP/Vista/7, 32 and 64 bit

    New driver for PC (3.5.3 replaces 3.5.0):

    • A rare BSOD could occur when receiving MIDI input data
    • The driver could exhibit audio dropouts and large spikes of CPU usage on some Windows 7 systems
    • On Windows 7, the "Safe Mode Level 1 - 3" Operation Modes are now better at allowing the driver to operate on a system with a high DPC latency (at the expense of additional audio latency). The minimum ASIO buffer size has increased when using one of the Safe Modes on Windows 7
    • The Control Panel's System tab now reports more details about the system configuration and an OHCI chipset's capabilities
    • A BSOD could occur when changing WDM settings with certain WDM channel mapping configurations.
    • A workaround has been added to avoid an intermittent BSOD that could occur in Microsoft's new 1394 OHCI bus driver on Windows 7 64-bit systems with a quad-core processor
    • A BSOD could occur because of an error in the driver's WDM channel mapping logic.
    • A BSOD could occur when attempting to view the WDM Microphone's properties
    • The driver's clock synchronization logic has been improved
    • A rare BSOD could occur when an ASIO host application was opening its connection to the driver
    • The ASIO driver now reports the correct digital latency on Windows 7
    • Improved streaming performance on systems with 4GB or more of RAM installed
    • Improved ASIO performance when using small buffer sizes on Windows XP or Vista

    MAC Installer:

    • To avoid confusion, "Control Panel & Drivers" is now always ticked of

    Control Panel

    • SK48: +4 switch was inversed. Fixed
    • On rare occasions, the Studio Konnekt 48 Mixer would collaps. FixedOn rare occasions, the Studio Konnekt 48 mixers internal data structure would corrupt. Fixed

    Firmware:

    • Impact Twin: In some cases MIDI was not available. Fixed

    VERSION 2.5.0 (R6886) FOR MAC

    MAC Driver: Version 3.5.3

    Supports 10.5.x/10.6.x
    • The driver has been updated to include Mac OS X 10.6 "Snow Leopard" 64-bit driver support.
    • If a device was attached while certain applications were active (iTunes and applications that use QuickTime, including web browsers), the CPU usage would increase and these applications' audio playback could become distorted.
    • The uninstaller application would not correctly detect and uninstall the driver on a Mac running OS X 10.6 if the driver had been installed before the Mac was upgraded to Mac OS X 10.6.
    • If the user's language was set to a non-English language, MIDI could
    • Channel names were not displayed in Audio MIDI Setup's speaker configuration window
    • The driver could fail to load at system bootup with a device attached
    • The driver would hang when used with a device that used a large channel count and a particular channel configuration
    • A Kernel Panic could occur in low memory conditions
    • MIDI output is now more accurately aligned with the audio
    • The driver will now ignore any devices that are not on the same firewire bus as the master device
    • Using large Core Audio buffer sizes on PowerPC Macs would often result in audio glitches
    • The driver's streaming engine has been improved to minimize CPU usage
    • Audio could become silent or distorted if other real time processes delayed the driver's streaming engine from processing its FireWire audio
    • The driver is now much faster at reconfiguring its streaming engine, for instance after selecting a new sample rate
    • When loading Cubase projects that used different sample rates, the driver would sometimes not switch to the correct sample rate
    • After attaching a device for the first time, a device could sometimes appear in Audio MIDI Setup with 0 input channels and 0 output channels and could not be used for audio input or output. The workaround was to toggle the sample rate or clock source to get it to be republished correctly
    • On rare occasions, the driver could hang when a device was removed
    • In the Control Panel application's Event Log window, the device lock changed bits were displayed in reverse order
    • The driver's streaming engine would unnecessarily restart twice when a device's channel configuration would change because of a change to the sample rate
    • The driver's clock synchronization logic has been improved
    • A device's nickname could become corrupted when it was shortened
    • On rare occasions, a device's nickname would not be restored correctly after a system power-cycle

    Control Panel

    • SK48: +4 switch was inversed. Fixed.

    Firmware:

    • Impact Twin: In some cases MIDI was not available. Fixed
    Changes in version 2.4.1

    VERSION 2.4.1 FINAL (R6489) PC

    • With some setups, Assimilator, ResFilter, M40 and Integrator was disabled. Fixed.

    VERSION 2.4.1 FINAL (R6468) MAC & (6457) PC

    PC: Driver 3.5.0

    • Minor modifications of the installer

    Mac: Driver 3.4.2

    • Issues when updating the driver from previous versions. FIXED

    VERSION 2.4.1 RC 2 (R6426) MAC & (6411) PC

    PC: Driver 3.5.0

    • The link placed at the desktop was pointing to a wrong location if the user was installing at a non-default location
    • There was no link to the control panel from Windows start menu
    • An update alert was unintendedly shown at CPL startup if the user was installing at a non-default location
    • The option to add a link to the Quick Launch bar has been re-enabled. Beware that this option does not work with Windows 7

    Mac: Driver 3.4.2

    • Smaller adjustments to the installer

    VERSION 2.4.1 (R6376) MAC & PC

    New driver for PC:
    Driver 3.5.0

    • The driver's performance on a system with high DPC latencies has been improved
    • On Windows 7 64-bit, Microsoft's new 1394 stack would sometimes fail to deallocate the isochronous bandwidth, requiring a system restart to restore the driver's functionality
    • A BSOD could occur on multi-processor/core systems when the audio streaming configuration was changed or when it recovered from a dropout
    • On Windows 7, the driver's minimum buffer size was not reported correctly
    • An ASIO host application's audio could become distorted after a large DPC latency spike occurred on the system
    • After putting a Windows 7 system to sleep, Microsoft's new 1394 stack was causing the driver to hang when the system was resumed
    • When using stacked devices, the order of the ASIO input channels could be flipped depending on the order that the devices were attached
    • ASIO streaming performance on Windows 7 has been improved
    • WDM input routing now works as expected

    Firmware:
    Impact Twin Firmware 1.07 included

    • An unintended raise in level occured when switching the Compressor/De-esser on/off, much more smooth now.

    Installer:

    • In some occasions, updating from older versions would fail, resulting in the device not being recognized
    • Impact Twin added to the installer
    • New versions of M40 Reverb, ResFilter and Assimilator added to the installer. These versions will run with all TC Audio Interfaces
    Changes in version

    Latest version

    Digital Konnekt x32 Software Mac - Version 3.0.0 - 32 MB
    Released: Monday, February 25, 2013
    Note: Supports Mointain Lion (10.8), Lion (10.7) and Snow Leopard (10.6)
    Digital Konnekt x32 Software Windows - Version 3.0.0 - 20 MB
    Released: Monday, February 25, 2013
    Note: Supports Windows Vista, Windows 7 and Windows 8 64bit
    Digital Konnekt x32 Software Windows - Version 3.0.0 - 19 MB
    Released: Monday, February 25, 2013
    Note: Supports Windows XP-SP3, Windows Vista, Windows 7 and Windows 8 32 bit

    Previous version

    + Show previous versions - Hide previous versions
    Digital Konnekt x32 Software Mac - Version 2.5.1 - 36 MB
    Released: Thursday, September 30, 2010
    Note: For OS X 10.5 Leopard (with 32bit PPC and Intel kernel), OS X 10.6 Snow Leopard (with 32bit and 64bit Intel kernel), OS X 10.7 Lion (with 32bit and 64bit Intel kernel)
    Digital Konnekt x32 Software Windows - Version 2.5 - 21 MB
    Released: Thursday, September 30, 2010
    Note: Windows 64 bit
    Digital Konnekt x32 Software Windows - Version 2.5 - 21 MB
    Released: Thursday, September 30, 2010
    Note: Windows 32 bit
    Digital Konnekt x32 Software Windows - Version 2.4.1 - 44 MB
    Released: Wednesday, March 03, 2010
    Digital Konnekt x32 Software Mac - Version 2.4.1 - 35 MB
    Released: Wednesday, March 03, 2010

  • Konnekt 8

    Software

    + Show version history + Hide version history
    Changes in version 3.0.0

    • Various Control Panel and Plug-in fixes for all platforms

    • Conflict with PowerCore Fabriks solved
    • Various audio and MIDI driver related stability, performance and latency improvements

    • Various Installation related issues fixed

    • OSX Specific

      • OSX 10.8 Mountain Lion compatibility
      • PPC support dropped
      • Uninstaller included

    • Windows Specific

      • DPC spike checker tool included

    Changes in version 2.5.1

    VERSION 2.5.1 REVISION 6962 FOR MAC

    New Audio Driver: Version 3.5.6

    Supports OSX 10.5.x, 10.6.x and 10.7.x

    • Lion compatible
    • Improvements in regards to general stability and performanceWhen loading Pro Tools 9 projects that used different sample rates, the driver would sometimes not switch to the correct sample rate or Pro Tools 9 would complain of a sample rate mismatch
    • A device that was detached from the computer could remain listed in Audio MIDI Setup
    • A device could sometimes appear in Audio MIDI Setup with 0 input channels and would require a reboot to restore functionality
    Changes in version 2.5

    VERSION 2.5.0 REVISION 6906 FOR MAC AND PC

    • Fixes for Studio Konnekt 48 Control Panel (remove channels)
    • 64 bit PrefPane (MAC)

    VERSION 2.5.0 REVISION 6895 FOR MAC AND PC

    MAC Driver: Version 3.5.3

    • Supports 10.5.x and 10.6.x

    New PC Driver: Version 3.5.3

    • Support Windows XP/Vista/7, 32 and 64 bit

    New driver for PC (3.5.3 replaces 3.5.0):

    • A rare BSOD could occur when receiving MIDI input data
    • The driver could exhibit audio dropouts and large spikes of CPU usage on some Windows 7 systems
    • On Windows 7, the "Safe Mode Level 1 - 3" Operation Modes are now better at allowing the driver to operate on a system with a high DPC latency (at the expense of additional audio latency). The minimum ASIO buffer size has increased when using one of the Safe Modes on Windows 7
    • The Control Panel's System tab now reports more details about the system configuration and an OHCI chipset's capabilities
    • A BSOD could occur when changing WDM settings with certain WDM channel mapping configurations.
    • A workaround has been added to avoid an intermittent BSOD that could occur in Microsoft's new 1394 OHCI bus driver on Windows 7 64-bit systems with a quad-core processor
    • A BSOD could occur because of an error in the driver's WDM channel mapping logic.
    • A BSOD could occur when attempting to view the WDM Microphone's properties
    • The driver's clock synchronization logic has been improved
    • A rare BSOD could occur when an ASIO host application was opening its connection to the driver
    • The ASIO driver now reports the correct digital latency on Windows 7
    • Improved streaming performance on systems with 4GB or more of RAM installed
    • Improved ASIO performance when using small buffer sizes on Windows XP or Vista

    MAC Installer:

    • To avoid confusion, "Control Panel & Drivers" is now always ticked of

    Control Panel

    • SK48: +4 switch was inversed. Fixed
    • On rare occasions, the Studio Konnekt 48 Mixer would collaps. FixedOn rare occasions, the Studio Konnekt 48 mixers internal data structure would corrupt. Fixed

    Firmware:

    • Impact Twin: In some cases MIDI was not available. Fixed

    VERSION 2.5.0 (R6886) FOR MAC

    MAC Driver: Version 3.5.3

    Supports 10.5.x/10.6.x
    • The driver has been updated to include Mac OS X 10.6 "Snow Leopard" 64-bit driver support.
    • If a device was attached while certain applications were active (iTunes and applications that use QuickTime, including web browsers), the CPU usage would increase and these applications' audio playback could become distorted.
    • The uninstaller application would not correctly detect and uninstall the driver on a Mac running OS X 10.6 if the driver had been installed before the Mac was upgraded to Mac OS X 10.6.
    • If the user's language was set to a non-English language, MIDI could
    • Channel names were not displayed in Audio MIDI Setup's speaker configuration window
    • The driver could fail to load at system bootup with a device attached
    • The driver would hang when used with a device that used a large channel count and a particular channel configuration
    • A Kernel Panic could occur in low memory conditions
    • MIDI output is now more accurately aligned with the audio
    • The driver will now ignore any devices that are not on the same firewire bus as the master device
    • Using large Core Audio buffer sizes on PowerPC Macs would often result in audio glitches
    • The driver's streaming engine has been improved to minimize CPU usage
    • Audio could become silent or distorted if other real time processes delayed the driver's streaming engine from processing its FireWire audio
    • The driver is now much faster at reconfiguring its streaming engine, for instance after selecting a new sample rate
    • When loading Cubase projects that used different sample rates, the driver would sometimes not switch to the correct sample rate
    • After attaching a device for the first time, a device could sometimes appear in Audio MIDI Setup with 0 input channels and 0 output channels and could not be used for audio input or output. The workaround was to toggle the sample rate or clock source to get it to be republished correctly
    • On rare occasions, the driver could hang when a device was removed
    • In the Control Panel application's Event Log window, the device lock changed bits were displayed in reverse order
    • The driver's streaming engine would unnecessarily restart twice when a device's channel configuration would change because of a change to the sample rate
    • The driver's clock synchronization logic has been improved
    • A device's nickname could become corrupted when it was shortened
    • On rare occasions, a device's nickname would not be restored correctly after a system power-cycle

    Control Panel

    • SK48: +4 switch was inversed. Fixed.

    Firmware:

    • Impact Twin: In some cases MIDI was not available. Fixed
    Changes in version 2.4.1

    VERSION 2.4.1 FINAL (R6489) PC

    • With some setups, Assimilator, ResFilter, M40 and Integrator was disabled. Fixed.

    VERSION 2.4.1 FINAL (R6468) MAC & (6457) PC

    PC: Driver 3.5.0

    • Minor modifications of the installer

    Mac: Driver 3.4.2

    • Issues when updating the driver from previous versions. FIXED

    VERSION 2.4.1 RC 2 (R6426) MAC & (6411) PC

    PC: Driver 3.5.0

    • The link placed at the desktop was pointing to a wrong location if the user was installing at a non-default location
    • There was no link to the control panel from Windows start menu
    • An update alert was unintendedly shown at CPL startup if the user was installing at a non-default location
    • The option to add a link to the Quick Launch bar has been re-enabled. Beware that this option does not work with Windows 7

    Mac: Driver 3.4.2

    • Smaller adjustments to the installer

    VERSION 2.4.1 (R6376) MAC & PC

    New driver for PC:
    Driver 3.5.0

    • The driver's performance on a system with high DPC latencies has been improved
    • On Windows 7 64-bit, Microsoft's new 1394 stack would sometimes fail to deallocate the isochronous bandwidth, requiring a system restart to restore the driver's functionality
    • A BSOD could occur on multi-processor/core systems when the audio streaming configuration was changed or when it recovered from a dropout
    • On Windows 7, the driver's minimum buffer size was not reported correctly
    • An ASIO host application's audio could become distorted after a large DPC latency spike occurred on the system
    • After putting a Windows 7 system to sleep, Microsoft's new 1394 stack was causing the driver to hang when the system was resumed
    • When using stacked devices, the order of the ASIO input channels could be flipped depending on the order that the devices were attached
    • ASIO streaming performance on Windows 7 has been improved
    • WDM input routing now works as expected

    Firmware:
    Impact Twin Firmware 1.07 included

    • An unintended raise in level occured when switching the Compressor/De-esser on/off, much more smooth now.

    Installer:

    • In some occasions, updating from older versions would fail, resulting in the device not being recognized
    • Impact Twin added to the installer
    • New versions of M40 Reverb, ResFilter and Assimilator added to the installer. These versions will run with all TC Audio Interfaces
    Changes in version

    Latest version

    Konnekt 8 Software Mac - Version 3.0.0 - 32 MB
    Released: Monday, February 25, 2013
    Note: Supports Mointain Lion (10.8), Lion (10.7) and Snow Leopard (10.6)
    Konnekt 8 Software Windows - Version 3.0.0 - 20 MB
    Released: Monday, February 25, 2013
    Note: Supports Windows Vista, Windows 7 and Windows 8 64bit
    Konnekt 8 Software Windows - Version 3.0.0 - 19 MB
    Released: Monday, February 25, 2013
    Note: Supports Windows XP-SP3, Windows Vista, Windows 7 and Windows 8 32 bit

    Previous version

    + Show previous versions - Hide previous versions
    Konnekt 8 Software Mac - Version 2.5.1 - 36 MB
    Released: Thursday, September 30, 2010
    Note: For OS X 10.5 Leopard (with 32bit PPC and Intel kernel), OS X 10.6 Snow Leopard (with 32bit and 64bit Intel kernel), OS X 10.7 Lion (with 32bit and 64bit Intel kernel)
    Konnekt 8 Software Windows - Version 2.5 - 21 MB
    Released: Thursday, September 30, 2010
    Note: Windows 64 bit
    Konnekt 8 Software Windows - Version 2.5 - 21 MB
    Released: Thursday, September 30, 2010
    Note: Windows 32 bit
    Konnekt 8 Software Windows - Version 2.4.1 - 44 MB
    Released: Wednesday, March 03, 2010
    Konnekt 8 Software Mac - Version 2.4.1 - 35 MB
    Released: Wednesday, March 03, 2010

  • Konnekt 24D

    Software

    + Show version history + Hide version history
    Changes in version 3.0.0

    • Various Control Panel and Plug-in fixes for all platforms

    • Conflict with PowerCore Fabriks solved
    • Various audio and MIDI driver related stability, performance and latency improvements

    • Various Installation related issues fixed

    • OSX Specific

      • OSX 10.8 Mountain Lion compatibility
      • PPC support dropped
      • Uninstaller included

    • Windows Specific

      • DPC spike checker tool included

    Changes in version 2.5.1

    VERSION 2.5.1 REVISION 6962 FOR MAC

    New Audio Driver: Version 3.5.6

    Supports OSX 10.5.x, 10.6.x and 10.7.x

    • Lion compatible
    • Improvements in regards to general stability and performanceWhen loading Pro Tools 9 projects that used different sample rates, the driver would sometimes not switch to the correct sample rate or Pro Tools 9 would complain of a sample rate mismatch
    • A device that was detached from the computer could remain listed in Audio MIDI Setup
    • A device could sometimes appear in Audio MIDI Setup with 0 input channels and would require a reboot to restore functionality
    Changes in version 2.5

    VERSION 2.5.0 REVISION 6906 FOR MAC AND PC

    • Fixes for Studio Konnekt 48 Control Panel (remove channels)
    • 64 bit PrefPane (MAC)

    VERSION 2.5.0 REVISION 6895 FOR MAC AND PC

    MAC Driver: Version 3.5.3

    • Supports 10.5.x and 10.6.x

    New PC Driver: Version 3.5.3

    • Support Windows XP/Vista/7, 32 and 64 bit

    New driver for PC (3.5.3 replaces 3.5.0):

    • A rare BSOD could occur when receiving MIDI input data
    • The driver could exhibit audio dropouts and large spikes of CPU usage on some Windows 7 systems
    • On Windows 7, the "Safe Mode Level 1 - 3" Operation Modes are now better at allowing the driver to operate on a system with a high DPC latency (at the expense of additional audio latency). The minimum ASIO buffer size has increased when using one of the Safe Modes on Windows 7
    • The Control Panel's System tab now reports more details about the system configuration and an OHCI chipset's capabilities
    • A BSOD could occur when changing WDM settings with certain WDM channel mapping configurations.
    • A workaround has been added to avoid an intermittent BSOD that could occur in Microsoft's new 1394 OHCI bus driver on Windows 7 64-bit systems with a quad-core processor
    • A BSOD could occur because of an error in the driver's WDM channel mapping logic.
    • A BSOD could occur when attempting to view the WDM Microphone's properties
    • The driver's clock synchronization logic has been improved
    • A rare BSOD could occur when an ASIO host application was opening its connection to the driver
    • The ASIO driver now reports the correct digital latency on Windows 7
    • Improved streaming performance on systems with 4GB or more of RAM installed
    • Improved ASIO performance when using small buffer sizes on Windows XP or Vista

    MAC Installer:

    • To avoid confusion, "Control Panel & Drivers" is now always ticked of

    Control Panel

    • SK48: +4 switch was inversed. Fixed
    • On rare occasions, the Studio Konnekt 48 Mixer would collaps. FixedOn rare occasions, the Studio Konnekt 48 mixers internal data structure would corrupt. Fixed

    Firmware:

    • Impact Twin: In some cases MIDI was not available. Fixed

    VERSION 2.5.0 (R6886) FOR MAC

    MAC Driver: Version 3.5.3

    Supports 10.5.x/10.6.x
    • The driver has been updated to include Mac OS X 10.6 "Snow Leopard" 64-bit driver support.
    • If a device was attached while certain applications were active (iTunes and applications that use QuickTime, including web browsers), the CPU usage would increase and these applications' audio playback could become distorted.
    • The uninstaller application would not correctly detect and uninstall the driver on a Mac running OS X 10.6 if the driver had been installed before the Mac was upgraded to Mac OS X 10.6.
    • If the user's language was set to a non-English language, MIDI could
    • Channel names were not displayed in Audio MIDI Setup's speaker configuration window
    • The driver could fail to load at system bootup with a device attached
    • The driver would hang when used with a device that used a large channel count and a particular channel configuration
    • A Kernel Panic could occur in low memory conditions
    • MIDI output is now more accurately aligned with the audio
    • The driver will now ignore any devices that are not on the same firewire bus as the master device
    • Using large Core Audio buffer sizes on PowerPC Macs would often result in audio glitches
    • The driver's streaming engine has been improved to minimize CPU usage
    • Audio could become silent or distorted if other real time processes delayed the driver's streaming engine from processing its FireWire audio
    • The driver is now much faster at reconfiguring its streaming engine, for instance after selecting a new sample rate
    • When loading Cubase projects that used different sample rates, the driver would sometimes not switch to the correct sample rate
    • After attaching a device for the first time, a device could sometimes appear in Audio MIDI Setup with 0 input channels and 0 output channels and could not be used for audio input or output. The workaround was to toggle the sample rate or clock source to get it to be republished correctly
    • On rare occasions, the driver could hang when a device was removed
    • In the Control Panel application's Event Log window, the device lock changed bits were displayed in reverse order
    • The driver's streaming engine would unnecessarily restart twice when a device's channel configuration would change because of a change to the sample rate
    • The driver's clock synchronization logic has been improved
    • A device's nickname could become corrupted when it was shortened
    • On rare occasions, a device's nickname would not be restored correctly after a system power-cycle

    Control Panel

    • SK48: +4 switch was inversed. Fixed.

    Firmware:

    • Impact Twin: In some cases MIDI was not available. Fixed
    Changes in version 2.4.1

    VERSION 2.4.1 FINAL (R6489) PC

    • With some setups, Assimilator, ResFilter, M40 and Integrator was disabled. Fixed.

    VERSION 2.4.1 FINAL (R6468) MAC & (6457) PC

    PC: Driver 3.5.0

    • Minor modifications of the installer

    Mac: Driver 3.4.2

    • Issues when updating the driver from previous versions. FIXED

    VERSION 2.4.1 RC 2 (R6426) MAC & (6411) PC

    PC: Driver 3.5.0

    • The link placed at the desktop was pointing to a wrong location if the user was installing at a non-default location
    • There was no link to the control panel from Windows start menu
    • An update alert was unintendedly shown at CPL startup if the user was installing at a non-default location
    • The option to add a link to the Quick Launch bar has been re-enabled. Beware that this option does not work with Windows 7

    Mac: Driver 3.4.2

    • Smaller adjustments to the installer

    VERSION 2.4.1 (R6376) MAC & PC

    New driver for PC:
    Driver 3.5.0

    • The driver's performance on a system with high DPC latencies has been improved
    • On Windows 7 64-bit, Microsoft's new 1394 stack would sometimes fail to deallocate the isochronous bandwidth, requiring a system restart to restore the driver's functionality
    • A BSOD could occur on multi-processor/core systems when the audio streaming configuration was changed or when it recovered from a dropout
    • On Windows 7, the driver's minimum buffer size was not reported correctly
    • An ASIO host application's audio could become distorted after a large DPC latency spike occurred on the system
    • After putting a Windows 7 system to sleep, Microsoft's new 1394 stack was causing the driver to hang when the system was resumed
    • When using stacked devices, the order of the ASIO input channels could be flipped depending on the order that the devices were attached
    • ASIO streaming performance on Windows 7 has been improved
    • WDM input routing now works as expected

    Firmware:
    Impact Twin Firmware 1.07 included

    • An unintended raise in level occured when switching the Compressor/De-esser on/off, much more smooth now.

    Installer:

    • In some occasions, updating from older versions would fail, resulting in the device not being recognized
    • Impact Twin added to the installer
    • New versions of M40 Reverb, ResFilter and Assimilator added to the installer. These versions will run with all TC Audio Interfaces
    Changes in version

    Latest version

    Konnekt 24D Software Mac - Version 3.0.0 - 32 MB
    Released: Monday, February 25, 2013
    Note: Supports Mointain Lion (10.8), Lion (10.7) and Snow Leopard (10.6)
    Konnekt 24D Software Windows - Version 3.0.0 - 20 MB
    Released: Monday, February 25, 2013
    Note: Supports Windows Vista, Windows 7 and Windows 8 64bit
    Konnekt 24D Software Windows - Version 3.0.0 - 19 MB
    Released: Monday, February 25, 2013
    Note: Supports Windows XP-SP3, Windows Vista, Windows 7 and Windows 8 32 bit

    Previous version

    + Show previous versions - Hide previous versions
    Konnekt 24D Software Mac - Version 2.5.1 - 36 MB
    Released: Thursday, September 30, 2010
    Note: For OS X 10.5 Leopard (with 32bit PPC and Intel kernel), OS X 10.6 Snow Leopard (with 32bit and 64bit Intel kernel), OS X 10.7 Lion (with 32bit and 64bit Intel kernel)
    Konnekt 24D Software Windows - Version 2.5 - 21 MB
    Released: Thursday, September 30, 2010
    Note: Windows 64 bit
    Konnekt 24D Software Windows - Version 2.5 - 21 MB
    Released: Thursday, September 30, 2010
    Note: Windows 32 bit
    Konnekt 24D Software Windows - Version 2.4.1 - 44 MB
    Released: Wednesday, March 03, 2010
    Konnekt 24D Software Mac - Version 2.4.1 - 35 MB
    Released: Wednesday, March 03, 2010

  • Konnekt Live

    Software

    + Show version history + Hide version history
    Changes in version 3.0.0

    • Various Control Panel and Plug-in fixes for all platforms

    • Conflict with PowerCore Fabriks solved
    • Various audio and MIDI driver related stability, performance and latency improvements

    • Various Installation related issues fixed

    • OSX Specific

      • OSX 10.8 Mountain Lion compatibility
      • PPC support dropped
      • Uninstaller included

    • Windows Specific

      • DPC spike checker tool included

    Changes in version 2.5.1

    VERSION 2.5.1 REVISION 6962 FOR MAC

    New Audio Driver: Version 3.5.6

    Supports OSX 10.5.x, 10.6.x and 10.7.x

    • Lion compatible
    • Improvements in regards to general stability and performanceWhen loading Pro Tools 9 projects that used different sample rates, the driver would sometimes not switch to the correct sample rate or Pro Tools 9 would complain of a sample rate mismatch
    • A device that was detached from the computer could remain listed in Audio MIDI Setup
    • A device could sometimes appear in Audio MIDI Setup with 0 input channels and would require a reboot to restore functionality
    Changes in version 2.5

    VERSION 2.5.0 REVISION 6906 FOR MAC AND PC

    • Fixes for Studio Konnekt 48 Control Panel (remove channels)
    • 64 bit PrefPane (MAC)

    VERSION 2.5.0 REVISION 6895 FOR MAC AND PC

    MAC Driver: Version 3.5.3

    • Supports 10.5.x and 10.6.x

    New PC Driver: Version 3.5.3

    • Support Windows XP/Vista/7, 32 and 64 bit

    New driver for PC (3.5.3 replaces 3.5.0):

    • A rare BSOD could occur when receiving MIDI input data
    • The driver could exhibit audio dropouts and large spikes of CPU usage on some Windows 7 systems
    • On Windows 7, the "Safe Mode Level 1 - 3" Operation Modes are now better at allowing the driver to operate on a system with a high DPC latency (at the expense of additional audio latency). The minimum ASIO buffer size has increased when using one of the Safe Modes on Windows 7
    • The Control Panel's System tab now reports more details about the system configuration and an OHCI chipset's capabilities
    • A BSOD could occur when changing WDM settings with certain WDM channel mapping configurations.
    • A workaround has been added to avoid an intermittent BSOD that could occur in Microsoft's new 1394 OHCI bus driver on Windows 7 64-bit systems with a quad-core processor
    • A BSOD could occur because of an error in the driver's WDM channel mapping logic.
    • A BSOD could occur when attempting to view the WDM Microphone's properties
    • The driver's clock synchronization logic has been improved
    • A rare BSOD could occur when an ASIO host application was opening its connection to the driver
    • The ASIO driver now reports the correct digital latency on Windows 7
    • Improved streaming performance on systems with 4GB or more of RAM installed
    • Improved ASIO performance when using small buffer sizes on Windows XP or Vista

    MAC Installer:

    • To avoid confusion, "Control Panel & Drivers" is now always ticked of

    Control Panel

    • SK48: +4 switch was inversed. Fixed
    • On rare occasions, the Studio Konnekt 48 Mixer would collaps. FixedOn rare occasions, the Studio Konnekt 48 mixers internal data structure would corrupt. Fixed

    Firmware:

    • Impact Twin: In some cases MIDI was not available. Fixed

    VERSION 2.5.0 (R6886) FOR MAC

    MAC Driver: Version 3.5.3

    Supports 10.5.x/10.6.x
    • The driver has been updated to include Mac OS X 10.6 "Snow Leopard" 64-bit driver support.
    • If a device was attached while certain applications were active (iTunes and applications that use QuickTime, including web browsers), the CPU usage would increase and these applications' audio playback could become distorted.
    • The uninstaller application would not correctly detect and uninstall the driver on a Mac running OS X 10.6 if the driver had been installed before the Mac was upgraded to Mac OS X 10.6.
    • If the user's language was set to a non-English language, MIDI could
    • Channel names were not displayed in Audio MIDI Setup's speaker configuration window
    • The driver could fail to load at system bootup with a device attached
    • The driver would hang when used with a device that used a large channel count and a particular channel configuration
    • A Kernel Panic could occur in low memory conditions
    • MIDI output is now more accurately aligned with the audio
    • The driver will now ignore any devices that are not on the same firewire bus as the master device
    • Using large Core Audio buffer sizes on PowerPC Macs would often result in audio glitches
    • The driver's streaming engine has been improved to minimize CPU usage
    • Audio could become silent or distorted if other real time processes delayed the driver's streaming engine from processing its FireWire audio
    • The driver is now much faster at reconfiguring its streaming engine, for instance after selecting a new sample rate
    • When loading Cubase projects that used different sample rates, the driver would sometimes not switch to the correct sample rate
    • After attaching a device for the first time, a device could sometimes appear in Audio MIDI Setup with 0 input channels and 0 output channels and could not be used for audio input or output. The workaround was to toggle the sample rate or clock source to get it to be republished correctly
    • On rare occasions, the driver could hang when a device was removed
    • In the Control Panel application's Event Log window, the device lock changed bits were displayed in reverse order
    • The driver's streaming engine would unnecessarily restart twice when a device's channel configuration would change because of a change to the sample rate
    • The driver's clock synchronization logic has been improved
    • A device's nickname could become corrupted when it was shortened
    • On rare occasions, a device's nickname would not be restored correctly after a system power-cycle

    Control Panel

    • SK48: +4 switch was inversed. Fixed.

    Firmware:

    • Impact Twin: In some cases MIDI was not available. Fixed
    Changes in version 2.4.1

    VERSION 2.4.1 FINAL (R6489) PC

    • With some setups, Assimilator, ResFilter, M40 and Integrator was disabled. Fixed.

    VERSION 2.4.1 FINAL (R6468) MAC & (6457) PC

    PC: Driver 3.5.0

    • Minor modifications of the installer

    Mac: Driver 3.4.2

    • Issues when updating the driver from previous versions. FIXED

    VERSION 2.4.1 RC 2 (R6426) MAC & (6411) PC

    PC: Driver 3.5.0

    • The link placed at the desktop was pointing to a wrong location if the user was installing at a non-default location
    • There was no link to the control panel from Windows start menu
    • An update alert was unintendedly shown at CPL startup if the user was installing at a non-default location
    • The option to add a link to the Quick Launch bar has been re-enabled. Beware that this option does not work with Windows 7

    Mac: Driver 3.4.2

    • Smaller adjustments to the installer

    VERSION 2.4.1 (R6376) MAC & PC

    New driver for PC:
    Driver 3.5.0

    • The driver's performance on a system with high DPC latencies has been improved
    • On Windows 7 64-bit, Microsoft's new 1394 stack would sometimes fail to deallocate the isochronous bandwidth, requiring a system restart to restore the driver's functionality
    • A BSOD could occur on multi-processor/core systems when the audio streaming configuration was changed or when it recovered from a dropout
    • On Windows 7, the driver's minimum buffer size was not reported correctly
    • An ASIO host application's audio could become distorted after a large DPC latency spike occurred on the system
    • After putting a Windows 7 system to sleep, Microsoft's new 1394 stack was causing the driver to hang when the system was resumed
    • When using stacked devices, the order of the ASIO input channels could be flipped depending on the order that the devices were attached
    • ASIO streaming performance on Windows 7 has been improved
    • WDM input routing now works as expected

    Firmware:
    Impact Twin Firmware 1.07 included

    • An unintended raise in level occured when switching the Compressor/De-esser on/off, much more smooth now.

    Installer:

    • In some occasions, updating from older versions would fail, resulting in the device not being recognized
    • Impact Twin added to the installer
    • New versions of M40 Reverb, ResFilter and Assimilator added to the installer. These versions will run with all TC Audio Interfaces
    Changes in version

    Latest version

    Konnekt Live Software Mac - Version 3.0.0 - 32 MB
    Released: Monday, February 25, 2013
    Note: Supports Mointain Lion (10.8), Lion (10.7) and Snow Leopard (10.6)
    Konnekt Live Software Windows - Version 3.0.0 - 20 MB
    Released: Monday, February 25, 2013
    Note: Supports Windows Vista, Windows 7 and Windows 8 64bit
    Konnekt Live Software Windows - Version 3.0.0 - 19 MB
    Released: Monday, February 25, 2013
    Note: Supports Windows XP-SP3, Windows Vista, Windows 7 and Windows 8 32 bit

    Previous version

    + Show previous versions - Hide previous versions
    Konnekt Live Software Mac - Version 2.5.1 - 36 MB
    Released: Thursday, September 30, 2010
    Note: For OS X 10.5 Leopard (with 32bit PPC and Intel kernel), OS X 10.6 Snow Leopard (with 32bit and 64bit Intel kernel), OS X 10.7 Lion (with 32bit and 64bit Intel kernel)
    Konnekt Live Software Windows - Version 2.5 - 21 MB
    Released: Thursday, September 30, 2010
    Note: Windows 64 bit
    Konnekt Live Software Windows - Version 2.5 - 21 MB
    Released: Thursday, September 30, 2010
    Note: Windows 32 bit
    Konnekt Live Software Windows - Version 2.4.1 - 44 MB
    Released: Wednesday, March 03, 2010
    Konnekt Live Software Mac - Version 2.4.1 - 35 MB
    Released: Wednesday, March 03, 2010