Discontinued Products

Software

  • PowerCore

    Software

    + Show version history + Hide version history
    Changes in version 4.4.3
    • PowerCore/Classic boot/sleep problems. Fixed
    • A rare BSOD which could happen during driver unload on Windows. Fixed
    Changes in version 4.4.1
    • various fixes and improvements
    • OSX: workaround addressing thunderbolt firewire issue with EFI firmware 1.0
    • Windows: workaround for systems reporting wrong PCI SUBSYS device identification which would lead to driver not installing.
    Changes in version 4.4.0.46
    • Improvements on stability and performance
    • BWL, MD3, NonLin2, DVR2, VSS3: fixed a 70ms silent lead-in happening immediately after plug-in instantiation 

     OSX Specific

    • PowerCore Quench uninstaller improved and included in OSX archive now
    • Issue where PowerCore installations could fail under 10.5 fixed (10.5 users: please use included Quench prior installation!)
    • PowerCore API bundle information fixed
    • Kernel extension compatibility issue fixed
    • Issues fixed related to installation changes on newer OS
    • Fixing permissions and install locations

     Windows specific

    • Driver uninstall fixed (The driver package will now be completely removed. Unfortunately this does not apply to previous installations.
    • Please remove the previous drivers manually from the Windows device manager before installation. For questions, please consult
    • http://forum.tcelectronic.com/topic/6546
    • 64bit Windows with more than 4GB RAM: various bug fixes
    • CL 1B Trial Label removed.
    • Better integration with Protools
    Changes in version 4.3.3

    For OSX Leopard, Snow Leopard, Windows 32bit and 64bit

    Windows specific

    • Driver fixes and improvements from the OSX version included
    • Windows: kernel event logging added
    • PowerCore driver package not separately listed in the Windows list of   installed items anymore.
    • Driver signing fixed (timestamp was missing)
    • MD3, BrickWall Limiter, MasterX3/X5 was not running under certain circumstances. Fixed
    • PowerCore plug-in messages are shown in the Windows event viewer (replacement for the PowerCore Messenger that existed in PowerCore versions prior to 4.)
    • NonLin2, DVR2, VSS3: MS redistributable dependencies removed
    • Consecutive PowerCore errors are posted in the same Event Viewer window
    • Character presets fixed
    • Issue in PowerCore device OS leading to "communication error". Fixed

     

    OS X specific

    • KP when instantiating a lot of licensed plug-ins across several PowerCore devices. Fixed
    • Added various driver security checks
    • Dynamic EQ.vst/component bundle: missing 1131.bmp added
    • Fixes related to PowerCore reset and bringing up all DSPs on PowerCore X8/6000
    • Plug-in auval crashes under Logic 9.1.5. Fixed
    • MacBook Pro PowerCore/FireWire device removal. Fixed
    • PowerCore Control Panel 4.3.3 is now included with lot of bug fixes and device arrival/removal fixes
    • Changes to the sleep/wake behavior for FireWire devices
    • PPC universal binaries fixed
    • Added security checks in the PowerCore/OS

     

    Various

    • CL1B updated; trial display removed; MS redistributable dependencies removed
    • MX3/5 softclip label fixed
    • Plug-in event log registry entry fixed
    • Master X5/X3: Labels corrected: Compressor Attack, Limiter (Softclip) Amount, Limiter Attack
    • MD3, Brickwall Limiter Version 1.2.5 now included: metering fixed
    • Dynamic EQ Version 1.2.4 now included: latency reporting fixed
    Changes in version 4.0.5
    PowerCore Software
    - Version history

    POWERCORE 4.0.3 FOR PC (WINDOWS XP/VISTA/7, 32 AND 64 BIT)
    
    New
    
    • Significant update of the PowerCore driver to support 64 bit Windows versions
    • Separate installer for the 64 bit version
    • Control Panel adjustments
    • New installer
    • Added Vintage Guitar Pedal Bundle
    • Lots of minor fixes
    

    POWERCORE 3.2.0.38 (MAC OSX) 3.2.0.39 (WINXP SP2/VISTA32)
    New PC: Vista32 compatible
    PC: New installer, WISE MAC: IntelMac compatible V-Station v. 1.1.2 added. PowerCore 6000 support DeNoise and Dynamic EQ are now included with PowerCore Compact Installer: PowerCore choise has been removed - all plug-ins are now installed
    Fixes Vintage Amp Room now runs as expected Virus plug-in now initializes correctly Sidechainer plug-in now works as expected Harmony 4 seems to crash the DSP when it is loaded. This leads to crackles and noisy sound. PC: fixes from MAC version 3.1.1.26.
    POWERCORE 3.1.1.26 (MAC OS X)
    News Included plug-ins are now shown in the control panel Added new plug-in, TapFactory
    Fixes CL 1B does not contain "TRIAL" in file version resource. FIXED DVR2: GUI error when effect is DISABLED. FIXED DVR cannot run at 96 kHz. FIXED DVR2 cuts off the sound in DP. FIXED Dynamic EQ doesn't follow automation in Cubase 4.1. FIXED Automation doesn't work in Logic (but there is a workaround) . FIXED Reading automated x5 caused cubase 4.1 to quit. FIXED AUval test for memory smashers crashes, if no PowerCore DSP available. FIXED Sending ANY control change to Powercore 01 in Cubase 4 results in additional note-on's. FIXED PowerCore 01: Greyed out sidechain "ON" button ...! FIXED Crash (driver?) when changing between Cubase 4.1 sessions with different S/R. FIXED Strange internal channel config in PowerCore 01 in some hosts. FIXED The VSS3 plug-in crashes inTone applications. FIXED VSS3 cuts off the sound in DP. FIXED All Poco Reverbs: AU Unit Reset() problem. In some cases, the reverb tail was heard after stop/start FIXED Side chainer startup bug. FIXED
    POWERCORE 3.1.0.23 (MAC OS X) AND 3.1.0.21 (WINDOWS)
    Fixes
    •Mac & Windows: Minor bug fixes and performance optimizations to the control panel. •Windows: Adjusting the Input parameter of NonLin2 could create distortion on the output. Fixed.
    News
    •Mac OS X & Windows: Adds the ability to remove optional plug-in licenses from second generation PowerCore hardware via the TC My Account.
    •Mac OS X: Audio Units versions of Fabrik C and Fabrik R have been renamed "Fabrik C PowerCore" and "Fabrik R PowerCore" to distinguish them from the similarly named plug-ins included with some Konnekt audio interfaces.
    POWERCORE 3.0.2.17 (MAC OS X & WINDOWS)
    Fixes •PowerCore X8: in some cases plug-ins could not be instantiated onto DSPs 5-8. Fixed. •PowerCore Unplugged: Error message for included plug-ins although other PowerCores were present in the system. Fixed. •PowerCore licenses: A licensed plug-in would only run on the PowerCore it was authorized for, not on any other PowerCore in the same system. Fixed. •On 1st generation PowerCore cards, only one instance of some plug-ins could be loaded, the 2nd instance would yield an internal error. Fixed. •Mac OS X: Audio distortion with UnWrap and TC Helicon plug-ins. Fixed. •Mac OS X: Plug-in user interface could not be closed after loading/saving presets in GarageBand or Logic. Fixed. •Mac OS X: Several plug-ins would not be removed by the uninstaller. Fixed. •Windows: Some DeClick and DeCrackle presets were installed into the NonLin2 preset location. Fixed. •Windows: DeCrackle plug-in wasn't removed by the Uninstaller. Fixed. •Windows: VoiceModeler styles were installed into the wrong location. Fixed. •Windows: Memory leak in Sidechainer which was constantly increasing the memory usage. Fixed. •PowerCore Installer: In case a PowerCore FireWire/Compact/X8 was connected and booted while installing, the driver would not be updated correctly. Fixed. •PowerCore 1.x licensed plug-ins could not be used with other PowerCore cards in the system, so forexample a Virus Single-DSP license would only run once on the card it was registered to, and not on any of the other available PowerCore DSPs. Fixed. •Virus: On some systems, a maximum of 10 instances of the Multi DSP license could be instantiated. Fixed. •ClassicVerb: In/Out meters did not fall back as expected. Fixed. •Brickwall Limiter: Wrong spelling of several tool tips. Fixed. •Tubifex: Some preset names appeared wrong, and long preset names were not completely refreshed on the user interface. Fixed.
    News
    •Mac OS X: Updated Vintage Amp Room to version 1.0.3. •Mac OS X: Now checks whether plug-ins are started in Rosetta emulation mode on Intel Macs and displays an appropriate error message. •Windows: Updated Virus Single DSP license to version 1.9.1.
    Known issues and missing features •On some Mac Pro systems, loading multiple plug-ins on a PowerCore Express can create overloads and drop-outs. If you experience this please get in touch with the TC Support Team. •The current Sonnox Oxford plug-ins cannot run under PowerCore 3.0 and need to be updated to newer versions. •Access Virus Multi DSP license is not yet Intel compatible under Mac OS X. •TC Helicon Harmony4 and Novation V-Station are not yet Intel compatible under Mac OS X and are only installed on PowerPC systems. •Mac OS X: Noveltech Character does not display the factory presets although they are installed in the right location. Save any setting to a user preset to fix it.
    POWERCORE 3.0.1.14 (MAC OS X & WINDOWS)
    Fixes
    •PowerCore X8: in some cases plug-ins could not be instantiated onto DSPs 5-8. Fixed. •PowerCore X8: included plug-ins were displayed as trial plug-ins. Fixed. •Control Panel: in some cases the DSP usage wouldn't get updated correctly when instantiating plugins. Fixed. •On some Windows systems, many of the plug-ins appeared to be invalid and could not be loaded.Fixed. •ClassicVerb: Zero Latency could be automated. Fixed. •Cubase crashed when changing between sessions with different sample rates. Fixed. •DVR2: Crashes Logic when instantiated. Fixed. •Intonator HS: Writing automation for Root Key via the plug-in UI would not be recorded. Fixed. •MegaReverb: several fixes to meters and the user interface. •PowerCore CL: on some system the PowerCore CL would not appear as a plug-in in the host. Fixed. •User interface fixes to several plug-ins
    News
    •Windows: a trial version of Virus 1.9 is included. •Windows: a trial version of Vintage Amp Room 1.0.3 is included.
    Known issues and missing features
    •On some Mac Pro systems, loading multiple plug-ins on a PowerCore Express can create overloads and drop-outs. If you experience this please get in touch with the TC Support Team. •The current Sonnox Oxford plug-ins cannot run under PowerCore 3.0 and need to be updated. •Access Virus Multi DSP license is not yet Intel compatible under Mac OS X. •Access Virus Multi DSP license is not updated to version 1.9 under Windows XP. •TC Helicon Harmony4 and Novation V-Station are not yet Intel compatible under Mac OS X and are only installed on PowerPC systems. •Mac OS X: Noveltech Character presets are installed in the wrong location. Manually copy them to ./Library/Application Support/Noveltech/ to fix it. •Windows: on some systems, the control panel cannot be loaded and plug-ins cannot be instantiated. Be sure to run the setup.exe or vcredist_x86.exe in the \driver directory of the PowerCore installer, to fix it. •Sidechainer on Windows: with the user interface open RAM usage increases exponentially. Close the plug-in user interface to fix it.
    POWERCORE 3.0.0.12 (MAC OS X & WINDOWS)
    Fixes
    •Numerous fixes and small improvements to included and optional plug-ins.
    News
    •Mac: plug-ins and drivers are Universal and support both Intel and PowerPC Macs. •Mac & Windows: Support for PowerCore X8 hardware added. •Mac & Windows: Control Panel now shows remaining trial time in hours instead of hours/minutes/seconds. •Mac & Windows: Tube-Tech CL 1B added + 4 hours of trial time. •Mac & Windows: Softube Vintage Amp Room PowerCore added + 4 hours of trial time. •Mac & Windows: improved preset handling on all TC Electronic plug-ins, with new preset up/down, a/b and reset buttons for faster preset browsing and comparison of settings. •Mac & Windows: new native Sidechainer plug-in with versatile high/low cut filters. •Mac & Windows: new versions of 24/7-C, ChorusDelay, Dynamic EQ, Filtroid, Master X3, Master X5,MegaReverb, PowerCore 01, PowerCore CL and VoiceStrip, some with completely new UIs and some with support for external audio sidechaining. For details on the new features please refer to /powercore3
    Known issues and missing features
    •On some Mac Pro systems, loading multiple plug-ins on a PowerCore Express can create overloads and drop-outs. If you experience this please get in touch with the TC Support Team. •The current Sonnox Oxford plug-ins cannot run under PowerCore 3.0 and need to be updated. •Access Virus Multi DSP license is not yet Intel compatible under Mac OS X. •TC Helicon Harmony4 and Novation V-Station are not yet Intel compatible under Mac OS X and are only installed on PowerPC systems. •On some systems the PowerCore control panel doesn't show the DSP usage correctly. Close and reopen the control panel to fix it. •On some systems the PowerCore control panel uses a lot of CPU. Close it whenever you're not using it.
    POWERCORE 2.2.1.4 (MAC OS X & WINDOWS)
    Fixes
    •PowerCore PCI mkII and PowerCore Express: on some cards, optional plug-ins could not be loaded. Fixed.
    POWERCORE 2.2.0.1 (MAC OS X)
    New Features
    •UnWrap added + 2 hours of demo time. •PowerCore version 2.1 on Mac OS X: the installer would report that it was older than a previous 2.x installation. •PowerCore Unplugged: Character / Filtroid were not enabled for running in trial mode. •PowerCore Express: some included plug-ins would appear as trial versions.
    POWERCORE 2.2.0.3 (WINDOWS)
    New Features
    •UnWrap added + 2 hours of demo time. •PowerCore Unplugged: Character / Filtroid were not enabled for running in trial mode. •PowerCore Express: some included plug-ins would appear as trial versions. •Numerous fixes to VSS3 for Windows. Version 1.2 is included in the installer.
    POWERCORE 2.1.0.3 (MAC OS X & WINDOWS)
    New Features
    •Added support for the PowerCore Express card for Mac OS X (PPC) and Windows XP.
    POWERCORE 2.0.2.26 (MAC OS X)
    Important Note:
    The system requirements have been changed for Mac OS X: Only 10.4 or higher is supported.
    New Features
    Added support for TC Helicon Harmony4 including 4 hours of trial time.
    POWERCORE 2.0.2.27 (WINDOWS)
    New Features
    Added support for TC Helicon Harmony4 including 4 hours of trial time.
    Fixes
    •Occasionally disabled plug-ins with Brickwall Limiter, DVR2, Fabrik R, MD3, NonLin2, VSS3 when switching sample rates or switching plug-in off/on. Fixed. •TC Thirty: Disables when switching oversampling on/off. Fixed.
    POWERCORE 2.0.1.23 (MAC OS X)
    Important Note:
    •The system requirements have been changed for Mac OS X: Only 10.3.9 or higher is supported. •Optional plug-ins are not overwritten by the installer. Therefore none of your purchased optional plugins are changed and they will operate nicely with the new software version. •The trial system is only supported by the PowerCore mkII/Unplugged/ Compact/Firewire.
    New Features
    •Un-installer. The software installer now installs two shell scripts into your Home folder, with which you can un-install either the PowerCore drivers or the plug-ins.
    Fixes
    •Under certain conditions some plug-ins (e.g TC MegaReverb) were not outputting audio. Fixed. •Occasional crashes with VSS3, DVR2, NonLin2, Fabrik C and Fabrik R when running sessions for a long time. Fixed. •Fabrik C showed up under the vendor name "TC Electronic A/S" instead of "TC Electronic" (as Audio Unit plug-in only). Fixed.
    Known issues
    •On Mac OS X some apps might not release the DSP code when removed from the apps rack using the TCAU. •You can get audio dropsouts in Cubase SX when the Plug-ins page is selected. •Intel Macs are not supported. For more information please see www.tcsupport.tc
    POWERCORE 2.0.0.18 (MAC OS X)
    Important note:
    •The system requirements have been changed for OSX: Only 10.3.9 or higher is supported. •Optional plug-ins are not overwritten by the installer. Therefore none of your purchased optional plugins are changed. They will operate nicely with the new software version. The trial counter of those plugins on your card(s) is not touched of course. •The trial system is only supported by the PowerCore mkII/Unplugged/ Compact/Firewire.
    Known issues
    •On OSX some apps might not release the DSP code when removed from the apps rack using the TCAU. •You can get audio drop outs in Cubase SX when the Plug-ins page is selected
    Fixes
    •Overall stability of the driver has been improved. •A crash could lead to a wrong internal state of the devices (FW only) and to another crash after reboot. •Some plug-ins are using the PowerCore API wrongly. PCore.dll/bundle blocks this now. •Under some circumstances an internal state of the plug-in representation in PCore.dll/bundle could have gotten lost (FIXED). •Removed DP crash workaround covered by fix for kernel panic above now •Messenger is not launched multiple times on Windows/OSX (deadlock can occur on OSX) (FIXED). •Decrackle/Brickwall/MD3 have been changed and only support mono/mono or stereo/stereo configuration. •Filtroid: A possible segmentation fault during auval scan has been fixed (OSX) •VSS3, NonLin2, MD3 don't crash Cubase SX 3.1 anymore when changing the I/O buffersize. •TC Thirty: Disables when switching oversampling on/off. Fixed.
    POWERCORE 2.0.0.12 (WINDOWS ONLY)
    Important note:
    •Optional plug-ins are not overwritten by the installer. Therefore none of your purchased optional plugins are changed. They will operate nicely with the new software version. The trial counter of those plugins on your card(s) is not touched of course. •The trial system is only supported by PowerCore mkII/Unplugged/Compact/Firewire.
    New Features
    •Trial time. Try out fully working optional plug-ins. •New control panel with overview over the PowerCore(s) in your system. •All-in-one installer for easy setup of all plug-ins. •Mini view with "always on top" feature: keep an eye with your CPU ressources. •Check for updates. This will check if you have the latest version of PowerCore.
    Known issues
    •We expect to address the AMD X2 issue on Windows in a later release. •On OSX some apps might not release the DSP code when removed from the apps rack using the TCAU.
    Fixes
    •The communication to the board has been improved to avoid under certain circumstances a OSX kernel panic could occur during auval scan •On OSX the Messenger doesn't popup if any error occurs during auval scans •On OSX 10.3.9 FW device are recognized reliable •Declick and Filtroid pass auval without error (OSX) •The SideChainer appears in "TC Electronic" submenu rather than "TC Works" in AU hosts •The long vendor names of all plug-ins have been corrected to be either "TC Works Soft- & Hardware GmbH" or "TC Electronic A/S" •Some spellings of copyrights and trademarks in the plug-ins are corrected •Four preset file names of the Intonator HS contained problematic characters A PowerCore error when inserting plugins as inserts for external instruments in Cubase SX 3.1 has been fixed
    Changes in version 3.1.0
    PowerCore Software
    - Version history
    POWERCORE 3.1.0.23 (MAC OS X) AND 3.1.0.21 (WINDOWS)
    
    Fixes
    •Mac & Windows: Minor bug fixes and performance optimizations to the control panel. •Windows: Adjusting the Input parameter of NonLin2 could create distortion on the output. Fixed.
    News
    •Mac OS X & Windows: Adds the ability to remove optional plug-in licenses from second generation PowerCore hardware via the TC My Account.
    •Mac OS X: Audio Units versions of Fabrik C and Fabrik R have been renamed "Fabrik C PowerCore" and "Fabrik R PowerCore" to distinguish them from the similarly named plug-ins included with some Konnekt audio interfaces.
    POWERCORE 3.0.2.17 (MAC OS X & WINDOWS)
    Fixes •PowerCore X8: in some cases plug-ins could not be instantiated onto DSPs 5-8. Fixed. •PowerCore Unplugged: Error message for included plug-ins although other PowerCores were present in the system. Fixed. •PowerCore licenses: A licensed plug-in would only run on the PowerCore it was authorized for, not on any other PowerCore in the same system. Fixed. •On 1st generation PowerCore cards, only one instance of some plug-ins could be loaded, the 2nd instance would yield an internal error. Fixed. •Mac OS X: Audio distortion with UnWrap and TC Helicon plug-ins. Fixed. •Mac OS X: Plug-in user interface could not be closed after loading/saving presets in GarageBand or Logic. Fixed. •Mac OS X: Several plug-ins would not be removed by the uninstaller. Fixed. •Windows: Some DeClick and DeCrackle presets were installed into the NonLin2 preset location. Fixed. •Windows: DeCrackle plug-in wasn't removed by the Uninstaller. Fixed. •Windows: VoiceModeler styles were installed into the wrong location. Fixed. •Windows: Memory leak in Sidechainer which was constantly increasing the memory usage. Fixed. •PowerCore Installer: In case a PowerCore FireWire/Compact/X8 was connected and booted while installing, the driver would not be updated correctly. Fixed. •PowerCore 1.x licensed plug-ins could not be used with other PowerCore cards in the system, so forexample a Virus Single-DSP license would only run once on the card it was registered to, and not on any of the other available PowerCore DSPs. Fixed. •Virus: On some systems, a maximum of 10 instances of the Multi DSP license could be instantiated. Fixed. •ClassicVerb: In/Out meters did not fall back as expected. Fixed. •Brickwall Limiter: Wrong spelling of several tool tips. Fixed. •Tubifex: Some preset names appeared wrong, and long preset names were not completely refreshed on the user interface. Fixed.
    News
    •Mac OS X: Updated Vintage Amp Room to version 1.0.3. •Mac OS X: Now checks whether plug-ins are started in Rosetta emulation mode on Intel Macs and displays an appropriate error message. •Windows: Updated Virus Single DSP license to version 1.9.1.
    Known issues and missing features •On some Mac Pro systems, loading multiple plug-ins on a PowerCore Express can create overloads and drop-outs. If you experience this please get in touch with the TC Support Team. •The current Sonnox Oxford plug-ins cannot run under PowerCore 3.0 and need to be updated to newer versions. •Access Virus Multi DSP license is not yet Intel compatible under Mac OS X. •TC Helicon Harmony4 and Novation V-Station are not yet Intel compatible under Mac OS X and are only installed on PowerPC systems. •Mac OS X: Noveltech Character does not display the factory presets although they are installed in the right location. Save any setting to a user preset to fix it.
    POWERCORE 3.0.1.14 (MAC OS X & WINDOWS)
    Fixes
    •PowerCore X8: in some cases plug-ins could not be instantiated onto DSPs 5-8. Fixed. •PowerCore X8: included plug-ins were displayed as trial plug-ins. Fixed. •Control Panel: in some cases the DSP usage wouldn't get updated correctly when instantiating plugins. Fixed. •On some Windows systems, many of the plug-ins appeared to be invalid and could not be loaded.Fixed. •ClassicVerb: Zero Latency could be automated. Fixed. •Cubase crashed when changing between sessions with different sample rates. Fixed. •DVR2: Crashes Logic when instantiated. Fixed. •Intonator HS: Writing automation for Root Key via the plug-in UI would not be recorded. Fixed. •MegaReverb: several fixes to meters and the user interface. •PowerCore CL: on some system the PowerCore CL would not appear as a plug-in in the host. Fixed. •User interface fixes to several plug-ins
    News
    •Windows: a trial version of Virus 1.9 is included. •Windows: a trial version of Vintage Amp Room 1.0.3 is included.
    Known issues and missing features
    •On some Mac Pro systems, loading multiple plug-ins on a PowerCore Express can create overloads and drop-outs. If you experience this please get in touch with the TC Support Team. •The current Sonnox Oxford plug-ins cannot run under PowerCore 3.0 and need to be updated. •Access Virus Multi DSP license is not yet Intel compatible under Mac OS X. •Access Virus Multi DSP license is not updated to version 1.9 under Windows XP. •TC Helicon Harmony4 and Novation V-Station are not yet Intel compatible under Mac OS X and are only installed on PowerPC systems. •Mac OS X: Noveltech Character presets are installed in the wrong location. Manually copy them to ./Library/Application Support/Noveltech/ to fix it. •Windows: on some systems, the control panel cannot be loaded and plug-ins cannot be instantiated. Be sure to run the setup.exe or vcredist_x86.exe in the \driver directory of the PowerCore installer, to fix it. •Sidechainer on Windows: with the user interface open RAM usage increases exponentially. Close the plug-in user interface to fix it.
    POWERCORE 3.0.0.12 (MAC OS X & WINDOWS)
    Fixes
    •Numerous fixes and small improvements to included and optional plug-ins.
    News
    •Mac: plug-ins and drivers are Universal and support both Intel and PowerPC Macs. •Mac & Windows: Support for PowerCore X8 hardware added. •Mac & Windows: Control Panel now shows remaining trial time in hours instead of hours/minutes/seconds. •Mac & Windows: Tube-Tech CL 1B added + 4 hours of trial time. •Mac & Windows: Softube Vintage Amp Room PowerCore added + 4 hours of trial time. •Mac & Windows: improved preset handling on all TC Electronic plug-ins, with new preset up/down, a/b and reset buttons for faster preset browsing and comparison of settings. •Mac & Windows: new native Sidechainer plug-in with versatile high/low cut filters. •Mac & Windows: new versions of 24/7-C, ChorusDelay, Dynamic EQ, Filtroid, Master X3, Master X5,MegaReverb, PowerCore 01, PowerCore CL and VoiceStrip, some with completely new UIs and some with support for external audio sidechaining. For details on the new features please refer to /powercore3
    Known issues and missing features
    •On some Mac Pro systems, loading multiple plug-ins on a PowerCore Express can create overloads and drop-outs. If you experience this please get in touch with the TC Support Team. •The current Sonnox Oxford plug-ins cannot run under PowerCore 3.0 and need to be updated. •Access Virus Multi DSP license is not yet Intel compatible under Mac OS X. •TC Helicon Harmony4 and Novation V-Station are not yet Intel compatible under Mac OS X and are only installed on PowerPC systems. •On some systems the PowerCore control panel doesn't show the DSP usage correctly. Close and reopen the control panel to fix it. •On some systems the PowerCore control panel uses a lot of CPU. Close it whenever you're not using it.
    POWERCORE 2.2.1.4 (MAC OS X & WINDOWS)
    Fixes
    •PowerCore PCI mkII and PowerCore Express: on some cards, optional plug-ins could not be loaded. Fixed.
    POWERCORE 2.2.0.1 (MAC OS X)
    New Features
    •UnWrap added + 2 hours of demo time. •PowerCore version 2.1 on Mac OS X: the installer would report that it was older than a previous 2.x installation. •PowerCore Unplugged: Character / Filtroid were not enabled for running in trial mode. •PowerCore Express: some included plug-ins would appear as trial versions.
    POWERCORE 2.2.0.3 (WINDOWS)
    New Features
    •UnWrap added + 2 hours of demo time. •PowerCore Unplugged: Character / Filtroid were not enabled for running in trial mode. •PowerCore Express: some included plug-ins would appear as trial versions. •Numerous fixes to VSS3 for Windows. Version 1.2 is included in the installer.
    POWERCORE 2.1.0.3 (MAC OS X & WINDOWS)
    New Features
    •Added support for the PowerCore Express card for Mac OS X (PPC) and Windows XP.
    POWERCORE 2.0.2.26 (MAC OS X)
    Important Note:
    The system requirements have been changed for Mac OS X: Only 10.4 or higher is supported.
    New Features
    Added support for TC Helicon Harmony4 including 4 hours of trial time.
    POWERCORE 2.0.2.27 (WINDOWS)
    New Features
    Added support for TC Helicon Harmony4 including 4 hours of trial time.
    Fixes
    •Occasionally disabled plug-ins with Brickwall Limiter, DVR2, Fabrik R, MD3, NonLin2, VSS3 when switching sample rates or switching plug-in off/on. Fixed. •TC Thirty: Disables when switching oversampling on/off. Fixed.
    POWERCORE 2.0.1.23 (MAC OS X)
    Important Note:
    •The system requirements have been changed for Mac OS X: Only 10.3.9 or higher is supported. •Optional plug-ins are not overwritten by the installer. Therefore none of your purchased optional plugins are changed and they will operate nicely with the new software version. •The trial system is only supported by the PowerCore mkII/Unplugged/ Compact/Firewire.
    New Features
    •Un-installer. The software installer now installs two shell scripts into your Home folder, with which you can un-install either the PowerCore drivers or the plug-ins.
    Fixes
    •Under certain conditions some plug-ins (e.g TC MegaReverb) were not outputting audio. Fixed. •Occasional crashes with VSS3, DVR2, NonLin2, Fabrik C and Fabrik R when running sessions for a long time. Fixed. •Fabrik C showed up under the vendor name "TC Electronic A/S" instead of "TC Electronic" (as Audio Unit plug-in only). Fixed.
    Known issues
    •On Mac OS X some apps might not release the DSP code when removed from the apps rack using the TCAU. •You can get audio dropsouts in Cubase SX when the Plug-ins page is selected. •Intel Macs are not supported. For more information please see www.tcsupport.tc
    POWERCORE 2.0.0.18 (MAC OS X)
    Important note:
    •The system requirements have been changed for OSX: Only 10.3.9 or higher is supported. •Optional plug-ins are not overwritten by the installer. Therefore none of your purchased optional plugins are changed. They will operate nicely with the new software version. The trial counter of those plugins on your card(s) is not touched of course. •The trial system is only supported by the PowerCore mkII/Unplugged/ Compact/Firewire.
    Known issues
    •On OSX some apps might not release the DSP code when removed from the apps rack using the TCAU. •You can get audio drop outs in Cubase SX when the Plug-ins page is selected
    Fixes
    •Overall stability of the driver has been improved. •A crash could lead to a wrong internal state of the devices (FW only) and to another crash after reboot. •Some plug-ins are using the PowerCore API wrongly. PCore.dll/bundle blocks this now. •Under some circumstances an internal state of the plug-in representation in PCore.dll/bundle could have gotten lost (FIXED). •Removed DP crash workaround covered by fix for kernel panic above now •Messenger is not launched multiple times on Windows/OSX (deadlock can occur on OSX) (FIXED). •Decrackle/Brickwall/MD3 have been changed and only support mono/mono or stereo/stereo configuration. •Filtroid: A possible segmentation fault during auval scan has been fixed (OSX) •VSS3, NonLin2, MD3 don't crash Cubase SX 3.1 anymore when changing the I/O buffersize. •TC Thirty: Disables when switching oversampling on/off. Fixed.
    POWERCORE 2.0.0.12 (WINDOWS ONLY)
    Important note:
    •Optional plug-ins are not overwritten by the installer. Therefore none of your purchased optional plugins are changed. They will operate nicely with the new software version. The trial counter of those plugins on your card(s) is not touched of course. •The trial system is only supported by PowerCore mkII/Unplugged/Compact/Firewire.
    New Features
    •Trial time. Try out fully working optional plug-ins. •New control panel with overview over the PowerCore(s) in your system. •All-in-one installer for easy setup of all plug-ins. •Mini view with "always on top" feature: keep an eye with your CPU ressources. •Check for updates. This will check if you have the latest version of PowerCore.
    Known issues
    •We expect to address the AMD X2 issue on Windows in a later release. •On OSX some apps might not release the DSP code when removed from the apps rack using the TCAU.
    Fixes
    •The communication to the board has been improved to avoid under certain circumstances a OSX kernel panic could occur during auval scan •On OSX the Messenger doesn't popup if any error occurs during auval scans •On OSX 10.3.9 FW device are recognized reliable •Declick and Filtroid pass auval without error (OSX) •The SideChainer appears in "TC Electronic" submenu rather than "TC Works" in AU hosts •The long vendor names of all plug-ins have been corrected to be either "TC Works Soft- & Hardware GmbH" or "TC Electronic A/S" •Some spellings of copyrights and trademarks in the plug-ins are corrected •Four preset file names of the Intonator HS contained problematic characters A PowerCore error when inserting plugins as inserts for external instruments in Cubase SX 3.1 has been fixed
    Changes in version 3.0.2
    PowerCore Software
    - Version history
    POWERCORE 3.0.2.17 (MAC OS X & WINDOWS)
    
    Fixes
    •PowerCore X8: in some cases plug-ins could not be instantiated onto DSPs 5-8. Fixed.
    •PowerCore Unplugged: Error message for included plug-ins although other PowerCores were present in the system. Fixed.
    •PowerCore licenses: A licensed plug-in would only run on the PowerCore it was authorized for, not on any other PowerCore in the same system. Fixed.
    •On 1st generation PowerCore cards, only one instance of some plug-ins could be loaded, the 2nd instance would yield an internal error. Fixed.
    •Mac OS X: Audio distortion with UnWrap and TC Helicon plug-ins. Fixed.
    •Mac OS X: Plug-in user interface could not be closed after loading/saving presets in GarageBand or Logic. Fixed.
    •Mac OS X: Several plug-ins would not be removed by the uninstaller. Fixed.
    •Windows: Some DeClick and DeCrackle presets were installed into the NonLin2 preset location. Fixed.
    •Windows: DeCrackle plug-in wasn't removed by the Uninstaller. Fixed.
    •Windows: VoiceModeler styles were installed into the wrong location. Fixed.
    •Windows: Memory leak in Sidechainer which was constantly increasing the memory usage. Fixed.
    •PowerCore Installer: In case a PowerCore FireWire/Compact/X8 was connected and booted while installing, the driver would not be updated correctly. Fixed.
    •PowerCore 1.x licensed plug-ins could not be used with other PowerCore cards in the system, so forexample a Virus Single-DSP license would only run once on the card it was registered to, and not on any of the other available PowerCore DSPs. Fixed.
    •Virus: On some systems, a maximum of 10 instances of the Multi DSP license could be instantiated. Fixed.
    •ClassicVerb: In/Out meters did not fall back as expected. Fixed.
    •Brickwall Limiter: Wrong spelling of several tool tips. Fixed.
    •Tubifex: Some preset names appeared wrong, and long preset names were not completely refreshed on the user interface. Fixed.
    News
    •Mac OS X: Updated Vintage Amp Room to version 1.0.3. •Mac OS X: Now checks whether plug-ins are started in Rosetta emulation mode on Intel Macs and displays an appropriate error message. •Windows: Updated Virus Single DSP license to version 1.9.1.
    Known issues and missing features •On some Mac Pro systems, loading multiple plug-ins on a PowerCore Express can create overloads and drop-outs. If you experience this please get in touch with the TC Support Team. •The current Sonnox Oxford plug-ins cannot run under PowerCore 3.0 and need to be updated to newer versions. •Access Virus Multi DSP license is not yet Intel compatible under Mac OS X. •TC Helicon Harmony4 and Novation V-Station are not yet Intel compatible under Mac OS X and are only installed on PowerPC systems. •Mac OS X: Noveltech Character does not display the factory presets although they are installed in the right location. Save any setting to a user preset to fix it.
    POWERCORE 3.0.1.14 (MAC OS X & WINDOWS)
    Fixes
    •PowerCore X8: in some cases plug-ins could not be instantiated onto DSPs 5-8. Fixed. •PowerCore X8: included plug-ins were displayed as trial plug-ins. Fixed. •Control Panel: in some cases the DSP usage wouldn't get updated correctly when instantiating plugins. Fixed. •On some Windows systems, many of the plug-ins appeared to be invalid and could not be loaded.Fixed. •ClassicVerb: Zero Latency could be automated. Fixed. •Cubase crashed when changing between sessions with different sample rates. Fixed. •DVR2: Crashes Logic when instantiated. Fixed. •Intonator HS: Writing automation for Root Key via the plug-in UI would not be recorded. Fixed. •MegaReverb: several fixes to meters and the user interface. •PowerCore CL: on some system the PowerCore CL would not appear as a plug-in in the host. Fixed. •User interface fixes to several plug-ins
    News
    •Windows: a trial version of Virus 1.9 is included. •Windows: a trial version of Vintage Amp Room 1.0.3 is included.
    Known issues and missing features
    •On some Mac Pro systems, loading multiple plug-ins on a PowerCore Express can create overloads and drop-outs. If you experience this please get in touch with the TC Support Team. •The current Sonnox Oxford plug-ins cannot run under PowerCore 3.0 and need to be updated. •Access Virus Multi DSP license is not yet Intel compatible under Mac OS X. •Access Virus Multi DSP license is not updated to version 1.9 under Windows XP. •TC Helicon Harmony4 and Novation V-Station are not yet Intel compatible under Mac OS X and are only installed on PowerPC systems. •Mac OS X: Noveltech Character presets are installed in the wrong location. Manually copy them to ./Library/Application Support/Noveltech/ to fix it. •Windows: on some systems, the control panel cannot be loaded and plug-ins cannot be instantiated. Be sure to run the setup.exe or vcredist_x86.exe in the \driver directory of the PowerCore installer, to fix it. •Sidechainer on Windows: with the user interface open RAM usage increases exponentially. Close the plug-in user interface to fix it.
    POWERCORE 3.0.0.12 (MAC OS X & WINDOWS)
    Fixes
    •Numerous fixes and small improvements to included and optional plug-ins.
    News
    •Mac: plug-ins and drivers are Universal and support both Intel and PowerPC Macs. •Mac & Windows: Support for PowerCore X8 hardware added. •Mac & Windows: Control Panel now shows remaining trial time in hours instead of hours/minutes/seconds. •Mac & Windows: Tube-Tech CL 1B added + 4 hours of trial time. •Mac & Windows: Softube Vintage Amp Room PowerCore added + 4 hours of trial time. •Mac & Windows: improved preset handling on all TC Electronic plug-ins, with new preset up/down, a/b and reset buttons for faster preset browsing and comparison of settings. •Mac & Windows: new native Sidechainer plug-in with versatile high/low cut filters. •Mac & Windows: new versions of 24/7-C, ChorusDelay, Dynamic EQ, Filtroid, Master X3, Master X5,MegaReverb, PowerCore 01, PowerCore CL and VoiceStrip, some with completely new UIs and some with support for external audio sidechaining. For details on the new features please refer to /powercore3
    Known issues and missing features
    •On some Mac Pro systems, loading multiple plug-ins on a PowerCore Express can create overloads and drop-outs. If you experience this please get in touch with the TC Support Team. •The current Sonnox Oxford plug-ins cannot run under PowerCore 3.0 and need to be updated. •Access Virus Multi DSP license is not yet Intel compatible under Mac OS X. •TC Helicon Harmony4 and Novation V-Station are not yet Intel compatible under Mac OS X and are only installed on PowerPC systems. •On some systems the PowerCore control panel doesn't show the DSP usage correctly. Close and reopen the control panel to fix it. •On some systems the PowerCore control panel uses a lot of CPU. Close it whenever you're not using it.
    POWERCORE 2.2.1.4 (MAC OS X & WINDOWS)
    Fixes
    •PowerCore PCI mkII and PowerCore Express: on some cards, optional plug-ins could not be loaded. Fixed.
    POWERCORE 2.2.0.1 (MAC OS X)
    New Features
    •UnWrap added + 2 hours of demo time. •PowerCore version 2.1 on Mac OS X: the installer would report that it was older than a previous 2.x installation. •PowerCore Unplugged: Character / Filtroid were not enabled for running in trial mode. •PowerCore Express: some included plug-ins would appear as trial versions.
    POWERCORE 2.2.0.3 (WINDOWS)
    New Features
    •UnWrap added + 2 hours of demo time. •PowerCore Unplugged: Character / Filtroid were not enabled for running in trial mode. •PowerCore Express: some included plug-ins would appear as trial versions. •Numerous fixes to VSS3 for Windows. Version 1.2 is included in the installer.
    POWERCORE 2.1.0.3 (MAC OS X & WINDOWS)
    New Features
    •Added support for the PowerCore Express card for Mac OS X (PPC) and Windows XP.
    POWERCORE 2.0.2.26 (MAC OS X)
    Important Note:
    The system requirements have been changed for Mac OS X: Only 10.4 or higher is supported.
    New Features
    Added support for TC Helicon Harmony4 including 4 hours of trial time.
    POWERCORE 2.0.2.27 (WINDOWS)
    New Features
    Added support for TC Helicon Harmony4 including 4 hours of trial time.
    Fixes
    •Occasionally disabled plug-ins with Brickwall Limiter, DVR2, Fabrik R, MD3, NonLin2, VSS3 when switching sample rates or switching plug-in off/on. Fixed. •TC Thirty: Disables when switching oversampling on/off. Fixed.
    POWERCORE 2.0.1.23 (MAC OS X)
    Important Note:
    •The system requirements have been changed for Mac OS X: Only 10.3.9 or higher is supported. •Optional plug-ins are not overwritten by the installer. Therefore none of your purchased optional plugins are changed and they will operate nicely with the new software version. •The trial system is only supported by the PowerCore mkII/Unplugged/ Compact/Firewire.
    New Features
    •Un-installer. The software installer now installs two shell scripts into your Home folder, with which you can un-install either the PowerCore drivers or the plug-ins.
    Fixes
    •Under certain conditions some plug-ins (e.g TC MegaReverb) were not outputting audio. Fixed. •Occasional crashes with VSS3, DVR2, NonLin2, Fabrik C and Fabrik R when running sessions for a long time. Fixed. •Fabrik C showed up under the vendor name "TC Electronic A/S" instead of "TC Electronic" (as Audio Unit plug-in only). Fixed.
    Known issues
    •On Mac OS X some apps might not release the DSP code when removed from the apps rack using the TCAU. •You can get audio dropsouts in Cubase SX when the Plug-ins page is selected. •Intel Macs are not supported. For more information please see www.tcsupport.tc
    POWERCORE 2.0.0.18 (MAC OS X)
    Important note:
    •The system requirements have been changed for OSX: Only 10.3.9 or higher is supported. •Optional plug-ins are not overwritten by the installer. Therefore none of your purchased optional plugins are changed. They will operate nicely with the new software version. The trial counter of those plugins on your card(s) is not touched of course. •The trial system is only supported by the PowerCore mkII/Unplugged/ Compact/Firewire.
    Known issues
    •On OSX some apps might not release the DSP code when removed from the apps rack using the TCAU. •You can get audio drop outs in Cubase SX when the Plug-ins page is selected
    Fixes
    •Overall stability of the driver has been improved. •A crash could lead to a wrong internal state of the devices (FW only) and to another crash after reboot. •Some plug-ins are using the PowerCore API wrongly. PCore.dll/bundle blocks this now. •Under some circumstances an internal state of the plug-in representation in PCore.dll/bundle could have gotten lost (FIXED). •Removed DP crash workaround covered by fix for kernel panic above now •Messenger is not launched multiple times on Windows/OSX (deadlock can occur on OSX) (FIXED). •Decrackle/Brickwall/MD3 have been changed and only support mono/mono or stereo/stereo configuration. •Filtroid: A possible segmentation fault during auval scan has been fixed (OSX) •VSS3, NonLin2, MD3 don't crash Cubase SX 3.1 anymore when changing the I/O buffersize. •TC Thirty: Disables when switching oversampling on/off. Fixed.
    POWERCORE 2.0.0.12 (WINDOWS ONLY)
    Important note:
    •Optional plug-ins are not overwritten by the installer. Therefore none of your purchased optional plugins are changed. They will operate nicely with the new software version. The trial counter of those plugins on your card(s) is not touched of course. •The trial system is only supported by PowerCore mkII/Unplugged/Compact/Firewire.
    New Features
    •Trial time. Try out fully working optional plug-ins. •New control panel with overview over the PowerCore(s) in your system. •All-in-one installer for easy setup of all plug-ins. •Mini view with "always on top" feature: keep an eye with your CPU ressources. •Check for updates. This will check if you have the latest version of PowerCore.
    Known issues
    •We expect to address the AMD X2 issue on Windows in a later release. •On OSX some apps might not release the DSP code when removed from the apps rack using the TCAU.
    Fixes
    •The communication to the board has been improved to avoid under certain circumstances a OSX kernel panic could occur during auval scan •On OSX the Messenger doesn't popup if any error occurs during auval scans •On OSX 10.3.9 FW device are recognized reliable •Declick and Filtroid pass auval without error (OSX) •The SideChainer appears in "TC Electronic" submenu rather than "TC Works" in AU hosts •The long vendor names of all plug-ins have been corrected to be either "TC Works Soft- & Hardware GmbH" or "TC Electronic A/S" •Some spellings of copyrights and trademarks in the plug-ins are corrected •Four preset file names of the Intonator HS contained problematic characters A PowerCore error when inserting plugins as inserts for external instruments in Cubase SX 3.1 has been fixed
    Changes in version 2.2.1
    PowerCore Software
    - Version history
    POWERCORE 2.2.1.4 (MAC OS X & WINDOWS)
    
    Fixes
    •PowerCore PCI mkII and PowerCore Express: on some cards, optional plug-ins could not be loaded. Fixed.
    POWERCORE 2.2.0.1 (MAC OS X)
    New Features
    •UnWrap added + 2 hours of demo time. •PowerCore version 2.1 on Mac OS X: the installer would report that it was older than a previous 2.x installation. •PowerCore Unplugged: Character / Filtroid were not enabled for running in trial mode. •PowerCore Express: some included plug-ins would appear as trial versions.
    POWERCORE 2.2.0.3 (WINDOWS)
    New Features
    •UnWrap added + 2 hours of demo time. •PowerCore Unplugged: Character / Filtroid were not enabled for running in trial mode. •PowerCore Express: some included plug-ins would appear as trial versions. •Numerous fixes to VSS3 for Windows. Version 1.2 is included in the installer.
    POWERCORE 2.1.0.3 (MAC OS X & WINDOWS)
    New Features
    •Added support for the PowerCore Express card for Mac OS X (PPC) and Windows XP.
    POWERCORE 2.0.2.26 (MAC OS X)
    Important Note:
    The system requirements have been changed for Mac OS X: Only 10.4 or higher is supported.
    New Features
    Added support for TC Helicon Harmony4 including 4 hours of trial time.
    POWERCORE 2.0.2.27 (WINDOWS)
    New Features
    Added support for TC Helicon Harmony4 including 4 hours of trial time.
    Fixes
    •Occasionally disabled plug-ins with Brickwall Limiter, DVR2, Fabrik R, MD3, NonLin2, VSS3 when switching sample rates or switching plug-in off/on. Fixed. •TC Thirty: Disables when switching oversampling on/off. Fixed.
    POWERCORE 2.0.1.23 (MAC OS X)
    Important Note:
    •The system requirements have been changed for Mac OS X: Only 10.3.9 or higher is supported. •Optional plug-ins are not overwritten by the installer. Therefore none of your purchased optional plugins are changed and they will operate nicely with the new software version. •The trial system is only supported by the PowerCore mkII/Unplugged/ Compact/Firewire.
    New Features
    •Un-installer. The software installer now installs two shell scripts into your Home folder, with which you can un-install either the PowerCore drivers or the plug-ins.
    Fixes
    •Under certain conditions some plug-ins (e.g TC MegaReverb) were not outputting audio. Fixed. •Occasional crashes with VSS3, DVR2, NonLin2, Fabrik C and Fabrik R when running sessions for a long time. Fixed. •Fabrik C showed up under the vendor name "TC Electronic A/S" instead of "TC Electronic" (as Audio Unit plug-in only). Fixed.
    Known issues
    •On Mac OS X some apps might not release the DSP code when removed from the apps rack using the TCAU. •You can get audio dropsouts in Cubase SX when the Plug-ins page is selected. •Intel Macs are not supported. For more information please see www.tcsupport.tc
    POWERCORE 2.0.0.18 (MAC OS X)
    Important note:
    •The system requirements have been changed for OSX: Only 10.3.9 or higher is supported. •Optional plug-ins are not overwritten by the installer. Therefore none of your purchased optional plugins are changed. They will operate nicely with the new software version. The trial counter of those plugins on your card(s) is not touched of course. •The trial system is only supported by the PowerCore mkII/Unplugged/ Compact/Firewire.
    Known issues
    •On OSX some apps might not release the DSP code when removed from the apps rack using the TCAU. •You can get audio drop outs in Cubase SX when the Plug-ins page is selected
    Fixes
    •Overall stability of the driver has been improved. •A crash could lead to a wrong internal state of the devices (FW only) and to another crash after reboot. •Some plug-ins are using the PowerCore API wrongly. PCore.dll/bundle blocks this now. •Under some circumstances an internal state of the plug-in representation in PCore.dll/bundle could have gotten lost (FIXED). •Removed DP crash workaround covered by fix for kernel panic above now •Messenger is not launched multiple times on Windows/OSX (deadlock can occur on OSX) (FIXED). •Decrackle/Brickwall/MD3 have been changed and only support mono/mono or stereo/stereo configuration. •Filtroid: A possible segmentation fault during auval scan has been fixed (OSX) •VSS3, NonLin2, MD3 don't crash Cubase SX 3.1 anymore when changing the I/O buffersize. •TC Thirty: Disables when switching oversampling on/off. Fixed.
    POWERCORE 2.0.0.12 (WINDOWS ONLY)
    Important note:
    •Optional plug-ins are not overwritten by the installer. Therefore none of your purchased optional plugins are changed. They will operate nicely with the new software version. The trial counter of those plugins on your card(s) is not touched of course. •The trial system is only supported by PowerCore mkII/Unplugged/Compact/Firewire.
    New Features
    •Trial time. Try out fully working optional plug-ins. •New control panel with overview over the PowerCore(s) in your system. •All-in-one installer for easy setup of all plug-ins. •Mini view with "always on top" feature: keep an eye with your CPU ressources. •Check for updates. This will check if you have the latest version of PowerCore.
    Known issues
    •We expect to address the AMD X2 issue on Windows in a later release. •On OSX some apps might not release the DSP code when removed from the apps rack using the TCAU.
    Fixes
    •The communication to the board has been improved to avoid under certain circumstances a OSX kernel panic could occur during auval scan •On OSX the Messenger doesn't popup if any error occurs during auval scans •On OSX 10.3.9 FW device are recognized reliable •Declick and Filtroid pass auval without error (OSX) •The SideChainer appears in "TC Electronic" submenu rather than "TC Works" in AU hosts •The long vendor names of all plug-ins have been corrected to be either "TC Works Soft- & Hardware GmbH" or "TC Electronic A/S" •Some spellings of copyrights and trademarks in the plug-ins are corrected •Four preset file names of the Intonator HS contained problematic characters A PowerCore error when inserting plugins as inserts for external instruments in Cubase SX 3.1 has been fixed
    Changes in version 1.9.6
    Changes in version 1.9.3
    Changes in version 1.6.2
    Changes in version 1.6.1
    Changes in version 1
    Changes in version 4.3.1

    POWERCORE 4.3.1 FOR MAC

    • Fixed issues at rare conditions during plug-in load/unload
    • BBOD on Multi-DSP Virus fixed
    • PowerCore/Firewire boot completely fixed; all PowerCores do now boot completely and always; workaround for Lucid based (MacBook Pro) or similar behaving firewire controller added
    • PowerCore/6000 bundled plug-ins corrected
    Changes in version 4.0.3

    POWERCORE 4.0.3 FOR PC (WINDOWS XP/VISTA/7, 32 AND 64 BIT)

    • Significant update of the PowerCore driver to support 64 bit Windows versions
    • Separate installer for the 64 bit version
    • Control Panel adjustments
    • New installer
    • Added Vintage Guitar Pedal Bundle
    • Lots of minor fixes
    Changes in version 3.2
    POWERCORE 3.2.0.38 (MAC OSX) 3.2.0.39 (WINXP SP2/VISTA32)
    New PC: Vista32 compatible
    PC: New installer, WISE MAC: IntelMac compatible V-Station v. 1.1.2 added. PowerCore 6000 support DeNoise and Dynamic EQ are now included with PowerCore Compact Installer: PowerCore choise has been removed - all plug-ins are now installed
    Fixes
    • Vintage Amp Room now runs as expected
    • Virus plug-in now initializes correctly
    • Sidechainer plug-in now works as expected
    • Harmony 4 seems to crash the DSP when it is loaded. This leads to crackles and noisy sound. PC: fixes from MAC version 3.1.1.26.
    Changes in version 3.1.1
    POWERCORE 3.1.1.26 (MAC OS X)
    
    News
    Included plug-ins are now shown in the control panel
    Added new plug-in, TapFactory
    Fixes
    • CL 1B does not contain "TRIAL" in file version resource. FIXED
    • DVR2: GUI error when effect is DISABLED. FIXED
    • DVR cannot run at 96 kHz. FIXED
    • DVR2 cuts off the sound in DP. FIXED
    • Dynamic EQ doesn't follow automation in Cubase 4.1. FIXED
    • Automation doesn't work in Logic (but there is a workaround) . FIXED
    • Reading automated x5 caused cubase 4.1 to quit. FIXED
    • AUval test for memory smashers crashes, if no PowerCore DSP available. FIXED
    • Sending ANY control change to Powercore 01 in Cubase 4 results in additional note-on's. FIXED
    • PowerCore 01: Greyed out sidechain "ON" button ...! FIXED
    • Crash (driver?) when changing between Cubase 4.1 sessions with different S/R. FIXED
    • Strange internal channel config in PowerCore 01 in some hosts. FIXED
    • The VSS3 plug-in crashes inTone applications. FIXED
    • VSS3 cuts off the sound in DP. FIXED
    • All Poco Reverbs: AU Unit Reset() problem. In some cases, the reverb tail was heard after stop/start FIXED
    • Side chainer startup bug. FIXED
    + Show previous versions - Hide previous versions
    PowerCore Software Mac - Version 4.4.1 - 130 MB
    Released: Monday, June 03, 2013
    PowerCore Software Windows - Version 4.4.0.46 - 59 MB
    Released: Wednesday, January 09, 2013
    Note: Windows 32 bit
    PowerCore Software Windows - Version 4.4.0.46 - 60 MB
    Released: Wednesday, January 09, 2013
    Note: Windows 64 bit
    PowerCore Software Mac - Version 4.4.0.46 - 130 MB
    Released: Wednesday, January 09, 2013
    Note: Zip file includes MAC OSX UnInstaller
    PowerCore Software Windows - Version 4.3.3 - 59 MB
    Released: Friday, December 16, 2011
    Note: Windows 32 bit
    PowerCore Software Windows - Version 4.3.3 - 59 MB
    Released: Friday, December 16, 2011
    Note: Windows 64 bit
    PowerCore Software Mac - Version 4.3.3 - 132 MB
    Released: Friday, December 16, 2011
    PowerCore Software Mac - Version 4.0.5 - 130 MB
    Released: Monday, May 10, 2010
    PowerCore Software Windows - Version 3.1.0 - 33 MB
    Released: Tuesday, March 04, 2008
    + Info - Info

    Please note the following:

    PowerCore Software Mac - Version 3.1.0 - 141 MB
    Released: Sunday, March 30, 2008
    + Info - Info

    Please note the following:

    PowerCore Software Windows - Version 3.0.2 - 33 MB
    Released: Thursday, January 24, 2008
    + Info - Info

    Please note the following:

    PowerCore Software Mac - Version 3.0.2 - 143 MB
    Released: Thursday, January 24, 2008
    + Info - Info

    Please note the following:

    PowerCore Software Windows - Version 2.2.1 - 25 MB
    Released: Wednesday, September 26, 2007
    + Info - Info

    Please note the following:

    All support and quality assurance testing has been discontinued for the software versions above, and they are provided as-is

    PowerCore Software Mac - Version 2.2.1 - 52 MB
    Released: Thursday, July 26, 2007
    + Info - Info

    Please note the following:

    PowerCore Software Windows - Version 1.9.6 - 7.73 MB
    Released: Wednesday, February 08, 2006
    + Info - Info

    Please note the following:

     

    PowerCore Software Mac - Version 1.9.6 - 17 MB
    Released: Wednesday, February 08, 2006
    + Info - Info

    Please note the following:

     

    PowerCore Software Windows - Version 1.9.3 - 7.85 MB
    Released: Tuesday, November 02, 2004
    + Info - Info

    Please note the following:

    PowerCore Software Mac - Version 1.9.3 - 17 MB
    Released: Thursday, September 30, 2004
    + Info - Info

    Please note the following:

    PowerCore Software Windows - Version 1.6.2 - 704 KB
    Released: Thursday, September 12, 2002
    PowerCore Software Mac - Version 1.6.1 - 19 MB
    Released: Thursday, September 01, 2005
    + Info - Info

    Please note the following:

    • These drivers are only for the PowerCore Element / PCI.
      PowerCore Compact / FireWire / X8 / 6000 / Unplugged / PCI mkII / Express will not run under Mac OS 9.
    • We are no longer offering any support for these drivers
    PowerCore Software Windows - Version 1.6.1 - 5.91 MB
    Released: Monday, August 05, 2002
    + -

    Please note the following:

    • These drivers are only for the PowerCore Element / PCI.
      PowerCore Compact / FireWire / X8 / 6000 / Unplugged / PCI mkII / Express will not run under Windows 98, SE, ME og 2000.
    • We are no longer offering any support for these drivers
    PowerCore Software Mac - Version 1 - 46.88 KB
    Released: Wednesday, September 01, 2010
    Note: MAC X uninstaller
    PowerCore Software Mac - Version 4.3.1 - 131 MB
    Released: Monday, January 24, 2011
    PowerCore Software Windows - Version 4.0.3 - 57 MB
    Released: Thursday, July 15, 2010
    PowerCore Software Windows - Version 4.0.3 - 56 MB
    Released: Thursday, July 15, 2010
    PowerCore Software Windows - Version 3.2 - 48 MB
    Released: Tuesday, September 30, 2008
    PowerCore Software Mac - Version 3.2 - 133 MB
    Released: Tuesday, September 30, 2008
    PowerCore Software Windows - Version 3.1.1 - 34 MB
    Released: Wednesday, September 17, 2008
    + Info - Info

    Please note the following:

    PowerCore 6000 requires software version 3.2 or higher.

Manuals

FAQ Knowledge Base articles