Guitar

Software

  • Nova System

    Firmware

    + Show version history + Hide version history
    Changes in version 1.2

    List of changes (from version 1.13)

    Fixes

    • Midi tempo sync of delaytimes and Mod speeds didn't work correctly ‐ fixed
    • To exit Tuner mode two pushes of a switch were needed ‐ fixed
    • Saved system and user bank dumps couldn't be restored ‐ fixed
    • Changing scale of the intelligent pitch shifter had no immedate effect ‐ fixed
    • Factory default feature didn't work correctly for some subtypes ‐ fixed
    • Output level difference between L + R channel of dynamic delay ‐ fixed
    • Pedal position wasn't read out at preset change in "master :pedal" mode - fixed
    • Typo in the midi dump received test ‐ fixed

    Changes

    • Added Midi sysEX documentation
    • Added confirmation message when midi dumps are received
    • VeriSign applied to the MS Windows updater
    • Optimised Midi receive buffer
    • SysEx ID is ignored when receiving a System Dumps
    • Optimised flash usage
    • Display of tempo dependent parameters is updated if the tempo is changed via MIDI
    • Tap tempo feature is disable when unit is synced to Midi clock (info text for user)
    Nova System Firmware Windows - Version 1.2 - 732 KB
    Released: Thursday, September 1, 2011
    + Installation instructions - Installation instructions
    • Download the latest Nova System 1.2 software installer at the bottom of this page
    • Connect the Nova System MIDI Input to the output of your MIDI device
    • Double click the installer software; choose your MIDI device in the drop down menu
    • Click the "Update" button

    Important

    Nova System will not reboot automatically. Power off Nova System once the installation progress bar reads 100%. Reconnect Nova System and wait until Nova System is fully up and running again. (You can check the version number after rebooting by pressing and holding the "levels" button. It should display "Nova System v. 1.2 SVN rev. 675").

    DO NOT disconnect Nova System before the installation progress bar reads "100%".
    DO NOT disconnect Nova System until Nova System is fully up and running after restarted.

    Your existing user presets shouldn't be affected in any way, however we suggest that you make a safety backup of your user presets as described in the manual.

    For backing up your user bank presets and system settings you can use the freely availableMidi Ox (on PC) or  SysExLibrarian  (on Mac). Other than this you can also record your Nova system Midi dumps in your Sequencer/DAW.

    To restore a saved user bank dump, just playback the recorded Midi file while Nova system's Midi in is connected to Midi out of your computer's Midi interface. The display of the Nova system will now indicate that your units receives Midi sysEX data.

    NB! Please be aware that the artist presets are exclusive to Nova System Limited and are not part of the firmware update. The presets on Nova System Limited are located in the user bank, which means that they would overwrite the existing user presets if they were included in the firmware update. 

    Nova System Firmware Mac - Version 1.2 - 1.54 MB
    Released: Thursday, September 1, 2011
    + Installation instructions - Installation instructions
    • Download the latest Nova System 1.2 software installer at the bottom of this page
    • Connect the Nova System MIDI Input to the output of your MIDI device
    • Double click the installer software; choose your MIDI device in the drop down menu
    • Click the "Update" button

    Important

    Nova System will not reboot automatically. Power off Nova System once the installation progress bar reads 100%. Reconnect Nova System and wait until Nova System is fully up and running again. (You can check the version number after rebooting by pressing and holding the "levels" button. It should display "Nova System v. 1.2 SVN rev. 675").

    DO NOT disconnect Nova System before the installation progress bar reads "100%".
    DO NOT disconnect Nova System until Nova System is fully up and running after restarted.

    Your existing user presets shouldn't be affected in any way, however we suggest that you make a safety backup of your user presets as described in the manual.

    For backing up your user bank presets and system settings you can use the freely availableMidi Ox (on PC) or  SysExLibrarian  (on Mac). Other than this you can also record your Nova system Midi dumps in your Sequencer/DAW.

    To restore a saved user bank dump, just playback the recorded Midi file while Nova system's Midi in is connected to Midi out of your computer's Midi interface. The display of the Nova system will now indicate that your units receives Midi sysEX data.

    NB! Please be aware that the artist presets are exclusive to Nova System Limited and are not part of the firmware update. The presets on Nova System Limited are located in the user bank, which means that they would overwrite the existing user presets if they were included in the firmware update. 

Manuals

Certificates of Conformity