Production

Software

  • M350

    Control Software

    M350 Control Software Windows - Version 1.3 - 18 MB
    Released: Friday, July 21, 2006
    + Update Instructions - Update Instructions
    Thank you for downloading the M350 control software !
    Important !
    The Control Software connects to the M350 via MIDI, so you will need a MIDI interface connected to your computer.
    
    First you need to update your M350 firmware to a newer version, as this is required in order for the control software work with your M350 unit.
    
    Please follow the update instructions in the M350 software update program (click Instructions').
    
    Disclaimer
    The M350 firmware upgrade can only be done using a PC running Windows. We have only tested it under Windows XP, but it may also work under other versions of Windows.
    We recommend using one of the following MIDI interfaces for the update:
    • Creative Soundblaster PCI-128 • Edirol FA101 • M-Audio Oxygen 8 • Midiman USB Midisport 1x1, 2x2, 8x8 • Midiman Uno • MPU-401 compatible soundcards • Steinberg USB2 • Terratec EWS88
    These MIDI interfaces cannot be recommended for the update, as they have exhibited mixed results:
    • Creamware Luna II • Emagic MT4 & Unitor8 • Edirol UM-1 • Edirol UM1S • Edirol PCR-50 • Edirol SD-90 • RME HDSP Digiface • RME FireFace • Steinberg MIDEX3 • Steinberg MIDEX8 • Turtle Beach Voyetra
    Please note, this does not mean that the ones above are bad MIDI interfaces - they just don't work in this particular case.
    If you do not have one of the above listed interfaces but another one not mentioned, please feel free to try it anyway.
    For an updated list of MIDI interfaces, please refer to this support article:
    http://tcsupport.custhelp.com/cgi-bin/tcsupport.cfg/php/enduser/std_adp.php?p_faqid=1860
    Please note, the software firmware cannot be made under Mac OS X.
    This is not a deliberate choice on the side of TC Electronic. We know a lot of studios and musicians use the Mac.
    Some customers have reported success using Virtual PC under Mac OS X with one of the recommended MIDI interfaces, but this is not a supported configuration.
    The software firmware also does not work with standalone MIDI sequencers/workstations.
    If you have any problems upgrading, please contact your TC Dealer or the TC Support Team @
    www.tcsupport.tc
    Use this link to receive a serial number for the M350 Control Software: click here


    M350 Control Software Mac - Version 1.3 - 42 MB
    Released: Friday, July 21, 2006
    + Update Instructions - Update Instructions
    Thank you for downloading the M350 control software !
    Important !
    The Control Software connects to the M350 via MIDI, so you will need a MIDI interface connected to your computer.
    
    First you need to update your M350 firmware to a newer version, as this is required in order for the control software work with your M350 unit.
    
    Please follow the update instructions in the M350 software update program (click Instructions').
    
    Disclaimer
    The M350 firmware upgrade can only be done using a PC running Windows. We have only tested it under Windows XP, but it may also work under other versions of Windows.
    We recommend using one of the following MIDI interfaces for the update:
    • Creative Soundblaster PCI-128 • Edirol FA101 • M-Audio Oxygen 8 • Midiman USB Midisport 1x1, 2x2, 8x8 • Midiman Uno • MPU-401 compatible soundcards • Steinberg USB2 • Terratec EWS88
    These MIDI interfaces cannot be recommended for the update, as they have exhibited mixed results:
    • Creamware Luna II • Emagic MT4 & Unitor8 • Edirol UM-1 • Edirol UM1S • Edirol PCR-50 • Edirol SD-90 • RME HDSP Digiface • RME FireFace • Steinberg MIDEX3 • Steinberg MIDEX8 • Turtle Beach Voyetra
    Please note, this does not mean that the ones above are bad MIDI interfaces - they just don't work in this particular case.
    If you do not have one of the above listed interfaces but another one not mentioned, please feel free to try it anyway.
    For an updated list of MIDI interfaces, please refer to this support article:
    http://tcsupport.custhelp.com/cgi-bin/tcsupport.cfg/php/enduser/std_adp.php?p_faqid=1860
    Please note, the firmware update cannot be made under Mac OS X.
    This is not a deliberate choice on the side of TC Electronic. We know a lot of studios and musicians use the Mac.
    Some customers have reported success using Virtual PC under Mac OS X with one of the recommended MIDI interfaces, but this is not a supported configuration.
    The software firmware also does not work with standalone MIDI sequencers/workstations.
    If you have any problems upgrading, please contact your TC Dealer or the TC Support Team @
    www.tcsupport.tc
    Use this link to receive a serial number for the M350 Control Software: click here

Manuals

Certificates of Conformity