The Integrator plug-in (VST and AU) makes integration of external hardware into your DAW environment seamless. It offers a “plug-in” audio routing representation of your external hardware, e.g. Reverb4000, Finalizer, System6000, etc.
VST and AU
Since Integrator operates like a normal VST/AU plug-in it can be inserted on any track, as a send effect or on the master output of your host application.
Multiple devices
Integrator works with up to four konnekt audio interfaces at a time, so if you have more interfaces, simply select the one that the external hardware is attached to.
Easy routing
To setup the routing of Integrator is as simple as possible. You only have to select the first audio channel: Integrator will then figure out how to route the rest. So, if you for instance have connected your external hardware to the S/PDIF 7+8, simply select S/PDIF 7.
Calibration
With the calibrate feature you can measure the latency of the entire signal chain from plug-in input to plug-in output, including the latency of the plug-in, the audio driver, the D/A and A/D converters and the latency of the external hardware you use. You can see the total roundtrip latency, and the host application will automatically compensate for this latency. Integrator has sample accurate latency measurement.
Test signal
Integrator is able to generate a test signal to verify that your external hardware is routed correctly. The auto test signal mode will cycle between channels.
Meters
Integrator features nice and clear send and return meter sections, and with the level controls you can control the send level and the return level individually.
Included with all konnekt audio interfaces
From TC Near konnekt software version 1.30, the Integrator plug-in is included with all konnekt interfaces.
