konnekt Comparison
Click here to see the complete konnekt Comparison sheet.
|
Technical Specifications
|
(*) See notes for konnekt 8 at the bottom of this page
|
|
Digital Inputs and Outputs
|
Connector (S/PDIF) |
 |
RCA Phono, 75 Ohm |
 |
Formats (S/PDIF and TosLink) *1) |
 |
S/PDIF (24 bit), IEC 958, Pro-status bits |
 |
Connector (ADAT® or TosLink) *2) |
 |
Optical Pipe |
 |
Format (ADAT®) *3) |
 |
8-ch. @ 48 kHz, 4-ch. SMUX @ 96 kHz |
 |
Firewire |
 |
IEEE 1394a, S400, IEC 61883 |
 |
Digital IO Engine |
 |
TC DICE II, handling all IO formats |
 |
Internal/External Sample Rates |
 |
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz / 43 to 193 kHz, jitter rejection at all rates |
 |
Jitter Rejection Engine |
 |
JET™ technology in TC DICE II |
 |
Jitter Rejection Filter |
 |
<-3 dB @ 10 Hz, < -100 dB @ 600 Hz |
 |
DIO Interface Jitter |
 |
< 1 ns peak, BW: 700 Hz to 100 kHz |
 |
AD/DA Conversion Jitter |
 |
< 42 ps RMS, BW: 100 Hz to 40 kHz |
 |
Digital Output Phase (stand alone and across network) |
 |
< 0.5 % of sample period |
 |
Input Slip Sample Tolerance (all DIs) |
 |
+50 % to -50 % of sample period |
 |
Processing Delay DIO @ 96/48 kHz |
 |
0.15/0.3 ms |
 |
Frequency Response DIO |
 |
DC to 23.9 kHz ± 0.01 dB @ 48 kHz |
 |
|
Line Inputs Ch. 1,2,3,4 *4)
|
Connectors |
 |
1/4” Phone Jack (balanced) Ground sensing design. Balanced/Unbalanced digital output switch *)6 |
 |
Impedance, Bal/Unbal |
 |
20 kOhm/25 kOhm |
 |
Full Scale Input Level @ 0 dBFS |
 |
+13 dBu |
 |
THD+N |
 |
< -100 dB (0.001%) @ 1 kHz, -1 dBFS |
 |
SNR |
 |
>111 dB(A), >108 dB, 20 Hz to 20 kHz |
 |
Freq. Response |
 |
+0/-0.5 dB, 20 Hz to 20 kHz |
 |
Crosstalk |
 |
< -100 dB, 20 Hz to 20 kHz |
 |
A to D Conversion |
 |
24 bit, 128 x oversampling bitstream |
 |
A to D Delay |
 |
0.68 ms / 0.63 ms @ 44.1 kHz / 48 kHz |
 |
Connectors |
 |
Neutrik Combo (XLR) |
 |
Sensitivity Full Range Pad on/off |
 |
-10/+10 dBu <> -52/ -32 dBu |
 |
Total Preamp gain |
 |
62 dB |
 |
Impedance, Pad on/off |
 |
2000/1300 ohm |
 |
NF @ Rg = 150 ohm, Max. Gain |
 |
< 4 dB |
 |
EIN @ Rg = 150 ohm, Max. Gain |
 |
< -127 dBu |
 |
THD+N, Min. Gain |
 |
< -100 dB (0.001%) @ 1 kHz, -1 dBFS |
 |
SNR, Min. Gain |
 |
>109 dB(A), >106 dB, 20 Hz to 20 kHz |
 |
Inst. Inputs Ch. 1,2 |
 |
|
 |
Connectors |
 |
Neutrik Combo (1/4” Phone Jack) |
 |
Sensitivity Range |
 |
-25 dBu <> +17 dBu |
 |
Total Preamp gain |
 |
42 dB |
 |
Impedance |
 |
1 Mohm |
 |
THD+N, Min. Gain |
 |
< -100 dB (0.001%) @ 1 kHz, -1 dBFS |
 |
SNR, Min. Gain |
 |
>107 dB(A), >104 dB, 20 Hz to 20 kHz |
 |
Crosstalk |
 |
< -100 dB, 20 Hz to 20 kHz |
 |
|
Monitor/Line Outputs Ch. 1,2,3,4 *5)
|
Connectors |
 |
1/4” Phone Jack. Ground sensing design. |
 |
Impedance |
 |
100 Ohm |
 |
Level Range (Ch. 1,2) |
 |
-40 dBu <> +12 dBu (analog gain scale) |
 |
Fixed Full Scale Range (Ch. 3,4) |
 |
+12 dBu |
 |
THD+N |
 |
< -94 dB (0.002%) @ 1 kHz, -1 dBFS |
 |
SNR |
 |
>111 dB(A), >108 dB, 20 Hz to 20 kHz |
 |
Freq. Response |
 |
+0/-0.1 dB, 20 Hz to 20 kHz |
 |
Crosstalk |
 |
< -100 dB, 20 Hz to 20 kHz |
 |
D to A Conversion |
 |
24 bit, 128 x oversampling bitstream |
 |
D to A Delay |
 |
0.70 ms / 0.65 ms @ 44.1 kHz / 48 kHz |
 |
|
Headphones Output (Ch. 1/2)
|
Connectors |
 |
2 x 1/4” Phone Jack (Stereo) |
 |
Impedance |
 |
80 Ohm |
 |
Gain Level Range |
 |
-80 dBu <> +16 dBu @ 300 ohms (analog gain scale) |
 |
THD+N |
 |
< -94 dB (0.002%) @ 1 kHz, -1 dBFS |
 |
SNR |
 |
>103 dB(A), > 100 dB, 20 Hz to 20 kHz |
 |
Freq. Response |
 |
+0/-0.1 dB, 20 Hz to 20 kHz |
 |
Crosstalk |
 |
< -100 dB, 20 Hz to 20 kHz |
 |
Power @ 40 Ohm Load |
 |
200mW |
 |
Power @ 600 Ohm Load |
 |
93mW |
 |
Complies With |
 |
EN 55103-1 and EN 55103-2, FCC part 15, Class B, CISPR 22, Class B |
 |
Certified To |
 |
IEC 60065, EN 60065, UL6500 and CSA E60065 CSA FILE #LR108093 |
 |
Operating Temperature |
 |
32° F to 122° F (0° C to 50° C) |
 |
Storage Temperature |
 |
-22° F to 167° F (-30° C to 70° C) |
 |
Humidity |
 |
Max. 90 % non-condensing |
 |
MIDI |
 |
In/Out: 5 Pin DIN |
 |
Firewire (DAW) |
 |
IEEE 1394a, IEC 61883 |
 |
General |
 |
|
 |
Dimensions |
 |
9.5" x 1.75" x 9" (241.5 x 44 x 226 mm) |
 |
Weight |
 |
3.3 lb. (1.5 kg) |
 |
Finish |
 |
Acrylic front panel. Plated and coated steel back plate. Anodized aluminum cover. |
 |
PPM Meter (Ch. 1,2) |
 |
3 LED's pr. channel |
 |
Power Supply (Included) |
 |
12V DC, Adapter for 90 to 240 VAC, 50 to 60 Hz (auto select) |
 |
Firewire Bus Powered |
 |
8 to 30 VDC |
 |
Power Consumption |
 |
<14 W |
 |
Warranty Parts and labor |
 |
1 year |
 |
|
Notes for konnekt8
*1) S/PDIF only *2) Not available *3) Not available *4) Line 1+2 recordable + AUX 1+2 *5) Two outputs only
|
|
|
 |
PowerCore owners have two more reasons to celebrate as TC Electronic is giving away two incredible reverb and compression plug-ins for the award-winning platform!
Read more
|
Vintage Guitar Pedal Bundle for PowerCore
With our Vintage Guitar Pedal Bundle, PowerCore users now have the chance to add five of the most sought-after vintage guitar effects pedals to their plug-in collections – including the unique SCF, our legendary Stereo Chorus Flanger.
|

Click here to find a TC Electronic dealer near you |
TC NEAR: Software 2.4.1 for TC Audio Interfaces
Version 2.4.1. includes support for Snow Leopard and 32bit/64bit Windows XP / Vista / 7.
|
Vincent Villuis - PowerCore X8 user
Vincent Villuis, aka AES Dana, is one of the co-founders of Ultimae Records, currently considered one of the best neo-ambient labels around. Since he was a teenager he has been linked with machines and technology. He has appeared on numerous recordings including four solo albums, three collaborations and around 40 compilations. He has just released his new album called [ Leylines ], on which plenty of TC Electronic gear was used...
|
|