Software

• 

  Konnekt Live

  Software

  + Show version history + Hide version history

  Changes in version 3.0.0

  • Various Control Panel and Plug-in fixes for all platforms

  • Conflict with PowerCore Fabriks solved
  • Various audio and MIDI driver related stability, performance and latency improvements

  • Various Installation related issues fixed

  • OSX Specific

  • • OSX 10.8 Mountain Lion compatibility
    • PPC support dropped
    • Uninstaller included

  • Windows Specific

    • DPC spike checker tool included

  Changes in version 2.5.1

  VERSION 2.5.1 REVISION 6962 FOR MAC

  New Audio Driver: Version 3.5.6

  Supports OSX 10.5.x, 10.6.x and 10.7.x

  • Lion compatible
  • Improvements in regards to general stability and performanceWhen loading Pro Tools 9 projects that used different sample rates, the driver would sometimes not switch to the correct sample rate or Pro Tools 9 would complain of a sample rate mismatch
  • A device that was detached from the computer could remain listed in Audio MIDI Setup
  • A device could sometimes appear in Audio MIDI Setup with 0 input channels and would require a reboot to restore functionality

  Changes in version 2.5

  VERSION 2.5.0 REVISION 6906 FOR MAC AND PC

  • Fixes for Studio Konnekt 48 Control Panel (remove channels)
  • 64 bit PrefPane (MAC)

  VERSION 2.5.0 REVISION 6895 FOR MAC AND PC

  MAC Driver: Version 3.5.3

  • Supports 10.5.x and 10.6.x

  New PC Driver: Version 3.5.3

  • Support Windows XP/Vista/7, 32 and 64 bit

  New driver for PC (3.5.3 replaces 3.5.0):

  • A rare BSOD could occur when receiving MIDI input data
  • The driver could exhibit audio dropouts and large spikes of CPU usage on some Windows 7 systems
  • On Windows 7, the "Safe Mode Level 1 - 3" Operation Modes are now better at allowing the driver to operate on a system with a high DPC latency (at the expense of additional audio latency). The minimum ASIO buffer size has increased when using one of the Safe Modes on Windows 7
  • The Control Panel's System tab now reports more details about the system configuration and an OHCI chipset's capabilities
  • A BSOD could occur when changing WDM settings with certain WDM channel mapping configurations.
  • A workaround has been added to avoid an intermittent BSOD that could occur in Microsoft's new 1394 OHCI bus driver on Windows 7 64-bit systems with a quad-core processor
  • A BSOD could occur because of an error in the driver's WDM channel mapping logic.
  • A BSOD could occur when attempting to view the WDM Microphone's properties
  • The driver's clock synchronization logic has been improved
  • A rare BSOD could occur when an ASIO host application was opening its connection to the driver
  • The ASIO driver now reports the correct digital latency on Windows 7
  • Improved streaming performance on systems with 4GB or more of RAM installed
  • Improved ASIO performance when using small buffer sizes on Windows XP or Vista

  MAC Installer:

  • To avoid confusion, "Control Panel & Drivers" is now always ticked of

  Control Panel

  • SK48: +4 switch was inversed. Fixed
  • On rare occasions, the Studio Konnekt 48 Mixer would collaps. FixedOn rare occasions, the Studio Konnekt 48 mixers internal data structure would corrupt. Fixed

  Firmware:

  • Impact Twin: In some cases MIDI was not available. Fixed

  VERSION 2.5.0 (R6886) FOR MAC

  MAC Driver: Version 3.5.3

  Supports 10.5.x/10.6.x

  • The driver has been updated to include Mac OS X 10.6 "Snow Leopard" 64-bit driver support.
  • If a device was attached while certain applications were active (iTunes and applications that use QuickTime, including web browsers), the CPU usage would increase and these applications' audio playback could become distorted.
  • The uninstaller application would not correctly detect and uninstall the driver on a Mac running OS X 10.6 if the driver had been installed before the Mac was upgraded to Mac OS X 10.6.
  • If the user's language was set to a non-English language, MIDI could
  • Channel names were not displayed in Audio MIDI Setup's speaker configuration window
  • The driver could fail to load at system bootup with a device attached
  • The driver would hang when used with a device that used a large channel count and a particular channel configuration
  • A Kernel Panic could occur in low memory conditions
  • MIDI output is now more accurately aligned with the audio
  • The driver will now ignore any devices that are not on the same firewire bus as the master device
  • Using large Core Audio buffer sizes on PowerPC Macs would often result in audio glitches
  • The driver's streaming engine has been improved to minimize CPU usage
  • Audio could become silent or distorted if other real time processes delayed the driver's streaming engine from processing its FireWire audio
  • The driver is now much faster at reconfiguring its streaming engine, for instance after selecting a new sample rate
  • When loading Cubase projects that used different sample rates, the driver would sometimes not switch to the correct sample rate
  • After attaching a device for the first time, a device could sometimes appear in Audio MIDI Setup with 0 input channels and 0 output channels and could not be used for audio input or output. The workaround was to toggle the sample rate or clock source to get it to be republished correctly
  • On rare occasions, the driver could hang when a device was removed
  • In the Control Panel application's Event Log window, the device lock changed bits were displayed in reverse order
  • The driver's streaming engine would unnecessarily restart twice when a device's channel configuration would change because of a change to the sample rate
  • The driver's clock synchronization logic has been improved
  • A device's nickname could become corrupted when it was shortened
  • On rare occasions, a device's nickname would not be restored correctly after a system power-cycle

  Control Panel

  • SK48: +4 switch was inversed. Fixed.

  Firmware:

  • Impact Twin: In some cases MIDI was not available. Fixed

  Changes in version 2.4.1

  VERSION 2.4.1 FINAL (R6489) PC

  • With some setups, Assimilator, ResFilter, M40 and Integrator was disabled. Fixed.

  VERSION 2.4.1 FINAL (R6468) MAC & (6457) PC

  PC: Driver 3.5.0

  • Minor modifications of the installer

  Mac: Driver 3.4.2

  • Issues when updating the driver from previous versions. FIXED

  VERSION 2.4.1 RC 2 (R6426) MAC & (6411) PC

  PC: Driver 3.5.0

  • The link placed at the desktop was pointing to a wrong location if the user was installing at a non-default location
  • There was no link to the control panel from Windows start menu
  • An update alert was unintendedly shown at CPL startup if the user was installing at a non-default location
  • The option to add a link to the Quick Launch bar has been re-enabled. Beware that this option does not work with Windows 7

  Mac: Driver 3.4.2

  • Smaller adjustments to the installer

  VERSION 2.4.1 (R6376) MAC & PC

  New driver for PC:
  Driver 3.5.0

  • The driver's performance on a system with high DPC latencies has been improved
  • On Windows 7 64-bit, Microsoft's new 1394 stack would sometimes fail to deallocate the isochronous bandwidth, requiring a system restart to restore the driver's functionality
  • A BSOD could occur on multi-processor/core systems when the audio streaming configuration was changed or when it recovered from a dropout
  • On Windows 7, the driver's minimum buffer size was not reported correctly
  • An ASIO host application's audio could become distorted after a large DPC latency spike occurred on the system
  • After putting a Windows 7 system to sleep, Microsoft's new 1394 stack was causing the driver to hang when the system was resumed
  • When using stacked devices, the order of the ASIO input channels could be flipped depending on the order that the devices were attached
  • ASIO streaming performance on Windows 7 has been improved
  • WDM input routing now works as expected

  Firmware:
  Impact Twin Firmware 1.07 included

  • An unintended raise in level occured when switching the Compressor/De-esser on/off, much more smooth now.

  Installer:

  • In some occasions, updating from older versions would fail, resulting in the device not being recognized
  • Impact Twin added to the installer
  • New versions of M40 Reverb, ResFilter and Assimilator added to the installer. These versions will run with all TC Audio Interfaces

  Changes in version

  Latest version

  Konnekt Live Software Mac - Version 3.0.0 - 32 MB

  Released: Monday, February 25, 2013
  Note: Supports Mointain Lion (10.8), Lion (10.7) and Snow Leopard (10.6)

  Konnekt Live Software Windows - Version 3.0.0 - 20 MB

  Released: Monday, February 25, 2013
  Note: Supports Windows Vista, Windows 7 and Windows 8 64bit

  Konnekt Live Software Windows - Version 3.0.0 - 19 MB

  Released: Monday, February 25, 2013
  Note: Supports Windows XP-SP3, Windows Vista, Windows 7 and Windows 8 32 bit

  Previous version

  + Show previous versions - Hide previous versions

  Konnekt Live Software Mac - Version 2.5.1 - 36 MB

  Released: Thursday, September 30, 2010
  Note: For OS X 10.5 Leopard (with 32bit PPC and Intel kernel), OS X 10.6 Snow Leopard (with 32bit and 64bit Intel kernel), OS X 10.7 Lion (with 32bit and 64bit Intel kernel)

  Konnekt Live Software Windows - Version 2.5 - 21 MB

  Released: Thursday, September 30, 2010
  Note: Windows 64 bit

  Konnekt Live Software Windows - Version 2.5 - 21 MB

  Released: Thursday, September 30, 2010
  Note: Windows 32 bit

  Konnekt Live Software Windows - Version 2.4.1 - 44 MB

  Released: Wednesday, March 03, 2010
  

  Konnekt Live Software Mac - Version 2.4.1 - 35 MB

  Released: Wednesday, March 03, 2010