|Digital Audio Inputs||
Input 1 - BNC (AES3id, S/PDIF)
|Input 2 - BNC (AES3id, S/PDIF)|
|Input 3 - BNC (AES3id, S/PDIF)|
|Input 4 - TOSLINK (EIAJ optical)|
|GPIO||2 external switch inputs, 1 relay output (100 mA max, optically isolated)|
|1/8" mono female (GPO)|
|1/4" stereo female (2x GPI)|
|USB||USB 2.0 (Micro type B)|
|Displays and controls|
|User controls||Rotary encoder|
|6 selection buttons|
|Display||7" TFT (color)|
|800 x 480 pixels|
|Power consumption||12 V DC, 0.5 A|
|Dimensions||182 x 140 x 25 mm (7.2 x 5.5 x 1")|
|Weight||0.85 kg (1.9 lbs) (excluding cable)|
|What's in the Box||Multi-country Power Supply|
|DB15 cable assembly|
|BNC female to RCA male adapter|
|USB cable (type A female to micro B male), 1 m long|
|Quick Start Guide|
|Complies with||ITU BS.1770-4, ATSC A/85, EBU R128, TR-B32 and OP-59|
|Plug-in mode||44.1 kHz|
|RAM Mount (not included)|
|Screws||Uses M5 screws. Length depends on RAM Mount type.|
Tech specs - Clarity M Plug-in
- OSX 10.10 (Yosemite)
- OSX 10.11 (El Capitan)
- OSX 10.12 (Sierra)
- macOS 10.13 (High Sierra)
- VST 2.4
- VST 3
- Audio Units
- AAX Native
- Windows 7
- Windows 8
- Windows 10
- VST 2.4
- VST 3
- AAX Native
You can use the plug-in with any host that supports either of the plug-in formats listed to the left.
The plug-in has been tested to be working with the following hosts:
- Avid Pro Tools
- Apple Logic Pro
- Steinberg Nuendo
- Steinberg Wavelab
- Steinberg Cubase
- Adobe Audition
- Ableton Live
- PreSonus Studio One
- Apple Final Cut Pro
- Adobe Premiere
Support isn't limited to these hosts.
The Clarity M plug-in was developed in cooperation with Audified.
In order to perfectly match your Clarity M with a RAM Mount, you need to combine three parts:
1) A base and two M5 12mm screws
2) An arm
3) A mount
Below you can read about some of the most commonly used RAM Mount solutions - with direct links to the RAM Mounts webshop.
1) The Base and Screws
The base is the part you fix to the back of Clarity M.
This base consists of a B size 1" diameter rubber ball on a 2.43" by 1.31" diamond plate
You need 2 standard M5 x 12mm screws to mount the base to Clarity M.
2) The Arm
The arm connects the Diamond Plate base to your mount of choice.
Short Double Socket Arm
Overall length: 2.38" (6,0452 cm)
Socket-to-socket length: 1.75" (4,445 cm)
Double Socket Arm
Overall length: 3.69" (9,3726 cm)
Socket-to-socket length: 3" (7,62 cm)
Long Double Socket Arm
Overall length: 6" (15,24 cm)
Socket-to-socket length: 5.25" (13,335 cm)
Double Socket Swivel Arm
Overall length: 6.25" (15,875 cm)
Socket-to-socket length: 5.5" (13,97 cm)
3) The Mount
The different mounts can be attached to all sorts of surfaces, from mic stands and poles to hard surfaces, tables, walls and ceilings.
This fits rails and tubes from 0.625" to 1.5" outer diameter (1,5875 to 3,81 cm)
This fits rails and tubes from 1" to 1.875" outer diameter (2,54 to 4,7625 cm).
This mount has pre-drilled holes, including the universal AMPs hole pattern.
Flex Adhesive Base
This mount has a double-sided adhesive PSA stick pad and sealed alcohol prep pad.
Suction Cup Base
The 3.3" suction cup is perfect for any glass or non-porous plastic surface.