Fixes• Instrument Input – Compressor responding to Mic/Line Input signal – fixed
• Compressor attack and release not responding to parameter changes – General attenuation of 12 dB – fixed
Installation Guide1. Download the latest G-Natural software at the bottom of this page.
2. Connect the G-Natural MIDI input to the output of your MIDI interace.
3. Double click the installer software icon; choose your MIDI device in the drop down menu.
4. Click the “Update” button.
ImportantDO NOT disconnect G-Natural before the installation progress bar reads "100%".
DO NOT disconnect G-natural until G-Natural is fully up and running after rebooting.
(You can check the version number after rebooting by pressing and holding the “levels” button)
Trouble shooting:In case of persistent errors, disconnect the power cable to the G-Natural for 10 seconds, then connect it again and retry the upload procedure.
Make sure you are using the latest drivers for your Midi interface.
If you still have issues upating your G-Natural to the latest software please get in touch with our
tech support.