Desktop Konnekt 6
The Desktop Konnekt 6 audio interface features a choice of monitor controls right at hand.
Big Volume Knob
The volume control is the knob you use all the time.
Therefore it is great that it sits right where you want it: Always
within reach. With a volume control independent from the computer -
between your computer and your speakers - you can always turn down
the volume, no matter what your computer does.
Reverb for Tracking
For monitoring convenience, the M40 Studio Reverb is
available as part of your monitor mix. You can control the reverb
level directly from the top panel of Desktop Konnekt 6, and you can
set reverb parameters using the control panel on the computer.
Direct Monitor Mix
Use the Direct Monitor knob to control the monitor level
directly from the top panel of Desktop Konnekt 6. Together with the
Dim switch and the Mono switch all the functions you need are right
at hand.
High Resolution Meter
The high resolution meter gives you precise information about
levels. With clear level indication, you can always monitor the
level of the input signal and if you're near clipping. You can also
use the meter for mastering purposes.
Scenes
With the Scene switch you can easily access three independent
configurations of your Desktop Konnekt 6. The three default presets
are for set up for a microphone and a guitar, two guitars or basses
and a stereo line signal respectively.
Control Panel
The control panel gives you full control over your monitor mix,
including the M40 Studio
Reverb.
Inputs and Outputs
When it comes to quality of the I/O section, Desktop Konnekt 6 has no compromises and matches its big brother in the Konnekt range.
IMPACT™ Mic Preamps
TC is renowned for its mic preamps, notably ranking among the
finest mic preamps on the market. Desktop Konnekt comes with an
IMPACT™ preamp, making the recording of a vocal or instrument pure
joy.
Headphones
The headphone output has its own powerful amplifier and a separate
converter, which makes you able to assign separate mix signal
independent from what you hear in your monitor speakers.
Hi-Z Guitar and Line Inputs
Equipped with the same instrument inputs used in TC's high-end
guitar processors, Desktop Konnekt offers studio quality guitar
recordings. These two hi impedance inputs will surely match the
quality of your guitar, maintaining the tone and sound on the
recording.
Balanced Outputs
The two balanced outputs match any powered or non-powered speaker
monitors.
M40 Studio Reverb
Included is the M40 Studio Reverb, a simple to use, great sounding reverb that is powered by AlgoFlex™ - a new high definition TC technology that enables hardware quality and predictability to be ported to native software.
Hall, Room and Plate
M40 Studio Reverb features three main reverb algorithms. The Hall
algorithm emulates a large hall with a broad and warm reverb. Room emulates a small and well-furnished room
with an intimate ambience and, going back in time, the Plate algorithm emulates the large metallic
plates which were used to create reverbs before digital signal
processing was commonplace.
Part of Monitor Signal Path
It is available for tracking to increase the recording comfort
without recording the effect to the final take, operated by the
control panel and the reverb knob on the top panel of Desktop
Konnekt 6.
VST and Audio Units
Beside being part of the monitor mix, the M40 Studio Reverb is also
available as a natively running VST/AU plug-in, allowing you to use
it as part of your recording session in your PC or Mac.














Comments