Gitarre

</> Video einbinden

<iframe width="640" height="360" src="//www.youtube.com/embed/?rel=0"></iframe>

 

The new Flashback 2 serves up a sonic buffet of expressive delay by infusing the pressure sensitive MASH technology with our renowned delay algorithms.

We completely redeveloped our Tape and Analog algorithms from scratch, recreating the tones of old school echoes with unheard realism, including every little eccentric behavior inherent in those legendary designs.

We also squeezed in a shimmering Crystal delay, made with our own polyphonic octave algorithm from Sub 'N' Up into Flashback 2.

And finally, with 3 TonePrint slots in total, you
get more flexibility than ever, and all the
legendary delay sounds that TC Electronic are
famous for.

  • Expressive MASH technology
  • New Ultra-Realistic Tape and Analog Algorithms
  • New Crystal Delay

Express Yourself!

MASH reacts to the amount of pressure you put on the switch.
The harder you press, the more intense the effect.

We made MASH controllable through the free TonePrint Editor which means that, you can assign to any parameter and up to 3 parameters at once. 

For each delay preset, MASH will control a different parameter and let you express yourself without having to bend down to turn knobs and without the trouble of getting a dedicated expression pedal. 

For example, you can assign MASH to raise the delay time as you press down, subtly increase the delay feedback into full-blown self-oscillation, or gradually add and deepen chorus modulation for out-of-tune flutters. 

New Tape and Analog Algorithms

We seriously improved the Tape and Analog algorithms to make them more realistic than ever, displaying all of the idiosyncratic flutters and warbles reminiscent of the old days.

Twisting the Delay knob while playing will alter the pitch of the repeats and cranking the feedback sends the pedal spinning into self-oscillation ecstasy.

With MASH added to the mix, you no longer have to strain you back to reach down and twist knobs while mid solo.
Just set MASH to control the parameter you have in mind and rock! 

New Crystal Delay

The tantalizing Crystal delay takes advantage the same cutting edge polyphonic octave algorithm that made the Sub 'N' Up Octaver a succes.

By shifting the pitch of the delayed signal up an octave through each feedback loop, we've created an immaculate shimmer. 

MASHing in this setting sends the delays into self-oscillation, providing you with surges of incandescent tone.

TonePrints® = herausragende Effekte!

Artists _beam _editor

Eingang nur für Künstler

TonePrints stehen für erstklassige Effekte - und erstklassige Effekte stehen für kreative Sounds. Von den Wegbereitern heutiger Sounds bis zu den Jungs, die heute bereits an der Musik der Zukunft tüfteln: Wir haben die coolsten Künstler unserer Zeit gebeten, ihre eigenen, maßgeschneiderten Versionen klassischer TC-Effekte zu erschaffen. Und weil man schöne Dinge teilen soll, stellen wir Ihnen diese Soundkreationen kostenlos zur Verfügung!

Erfahren Sie mehr über die Künstler!

Bereit zum Beamen!

Laden Sie die kostenlose TonePrint-App für Ihr Android-Smartphone oder iPhone herunter, wählen Sie einen TonePrint aus, den sie verwenden wollen - und beamen Sie ihn über den Pickup Ihrer Gitarre direkt in Ihr TonePrint-Pedal. Keine Kabel erforderlich! Erfahren Sie mehr über das TonePrint-"Beaming".

Android Play Logo  Apple App Store Logo 

 

Ihre Vision - Ihr Sound

Wenn Sie Musik machen, drücken Sie sich selbst aus. Daher ist es Ihr gutes Recht, Ihren persönlichen Sound mit Effekten genau so zu formen, wie SIE es wollen - ohne Grenzen und Kompromisse.

Mit dem TonePrint Editor bekommen Sie die volle Kontrolle über den Klang sowie den Regelbereich und die Skalierung der Regler Ihres Pedals.

Holen Sie sich jetzt den Editor für PC oder Mac

True to Tone Logo

Wir schwören Klanghaftigkeit!

Sie lieben schöne Sounds - und wir tun dasselbe. Unsere Produktpalette und -philosophie zeigen, wie ernst es uns damit ist. Was auch immer Sie also in Sachen Sound planen: TC ist auf Ihrer Seite. Mit optimiertem Headroom, den Bypass-Varianten "True" und "Buffered" sowie der Kill-Dry-Funktion steht dieses Pedal für kompromisslosen Klang - ohne jede Verfärbung. Und ob Ihr TC-Effekt nun angeschaltet ist oder nicht: Der wichtigste Bestandteil Ihres Sounds - das pure, analoge Signal Ihres Instruments - durchläuft dank der "Analog Dry Through"-Schaltung das Pedal stets unbearbeitet und ohne jede Beeinträchtigung.

Sounds

Backstage Pass - All Access

Flashback 2 Delay makes dialing in a sweet delay intuitive and easy, while the addition of MASH gives you a totally new way of using a delay pedal.

Subdivision Mini Toggle

The subdivision switch lets you choose between repeats in quarter notes, dotted eighths or both combined! Using the TonePrint Editor will provide you with even more subdivisions.

Delay

Set the delay time from short echoes up to 7 seconds of dreamy delay. In Tape and Analog modes, twisting this knob will alter the pitch of the delays just as in the old designs.

Level

Sets the volume of the delayed repeats from subtly tailing your signal to almost overpowering it! Whether you want faint echoes or resounding repetitions of your signal, we’ve got you covered.

Feedback

This knob manipulates the number of repetitions. If you crank the knob all the way up, the pedal will go into sweet, psychedelic self-oscillation.

Type Selector

Choose from 8 studio quality delay types (including brand new Analog, Tape, and Crystal delays) and use the 3 (!!!) TonePrint slots to either design your own delay or select one from the TonePrint family of artists. P.Pong, Slap, and LoFi delays are still available through the TonePrint Editor.

Footswitch

Press the switch to turn on the pedal. After that, you simply hold down the switch to engage MASH. The technology is pressure sensitive so the harder you press down, the more intense the effect. Lift your foot and MASH is bypassed. Of course, you still get either true- or buffered bypass by using the easy-to-access internal dip switch.

MASHlight

The MASHlight indicates the intensity of the effect controlled by MASH. Putting pressure on the footswitch will make the MASHlight brighter and lifting your foot off the pedal will make it dimmer.

Optional External Tap Tempo Switch

Now you can connect an external tap tempo footswitch through the stereo input to make tempo tapping extra easy.

MASH Presets

For each delay type, MASH has a different effect. Here is a quick overview.

2290

Using our legendary 2290 delay algorithm, MASH is assigned to raise the Feedback and input level, effectively freezing the last repetition until you release the footswitch for a "hold"-effect.

TonePrint 3

This setting is a Crystal delay where MASH controls the input level of your instrument. It is essentially a volume pedal that raises the input level, as you press the MASH switch down and lowers it when you don’t.

Ana

In our reworked Analog mode, MASH boosts Feedback and turns down Delay time for real time self-oscillation madness that sends the pitch flying!

Tape

Using the classic and über-realistic Tape mode, MASH controls Delay time and boosts Feedback to maximum for an orgy of space echo feedback.

Dyn

With the Dynamic Delay algorithm, MASH controls the gate threshold. This means that pushing MASH down removes the gate, leaving you with a normal 2290 delay.

Mod

In the Modulation mode, pressing MASH increases the depth of the TriChorus modulation over the delayed repeats.

Crystal

In Crystal mode, MASH raises the Octaver send, the delay Feedback and the spacing of the Octaver's filter bank. Put simply, it controls the intensity of the shimmer effect for swells of crystalline repeats.

Rvs

Using the old school Reverse delay effect, MASH engages the “kill dry”-mode and mutes the dry signal, leaving only a reversed sound.

Loop

With the looper engaged, MASH is effectively disabled.

TonePrint 1

This setting is based on a Tape delay with MASH controlling feedback and the amount of soft clipping from the tape.

TonePrint 2

This setting is based on a Crystal delay with MASH controlling the delay Feedback and the tone of the octave.

Flashback 2 Delay in der Übersicht

  • MASH technology
  • New realistic Tape and Analog Algorithms 
  • New Crystal delay features Sub 'N' Up octave algorithm
  • 8 high quality delay types and 3 TonePrint slots
  • 40 second looper
  • Stereo in/out
  • True Bypass or Buffered Bypass
  • Analog-dry-through
  • Delay time, Level, and Feedback controls
  • Switch between different rhythmic subdivisions with more available through TonePrint Editor
  • Connect external tap pedal through stereo jack
  • Small footprint
  • High quality components
  • Road-ready design
  • Spillover on/off

Bilder

Künstler, die das FlashBack 2 Delay verwenden

Was Ihnen auch gefallen könnte: