Broadcast

Software

  • DB6

    Firmware

    + Show version history + Hide version history
    Changes in version 1.30
    • GPI now handles recall of up to 16 Presets using GPI 1+2
    • DB6 now can be controlled by multiple Icon remotes at the same time
    • Copying of User Preset Banks to/from files is now supported
    • Improvements on performance and stability
    Changes in version 1.25
    Changes in version 1.2
    Changes in version 1.0
    DB6 Firmware Windows & Mac - Version 1.30 - 630 KB
    Released: Wednesday, January 22, 2014

    TC Icon Software

    + Show version history + Hide version history
    Changes in version 7.5

    New (optional) algorithm: Reverb 8

    System 6000 Film support

    DB6 AES support

    General improvements on stability and performance

    Changes in version 7.3
    • DB6 GPI now handles recall of up to 16 Presets using GPI 1+2
    • DB6 can now be controlled by multiple Icon remotes at the same time
    • Copying of User Preset Banks to/from files is now supported for DB6
    • Improvements on performance and stability
    Changes in version 7.02
    Changes in version 6.60
    Changes in version 6.50
    Changes in version 6.40
    Changes in version 6.20

    Icon improvements

    • Support of Intel based Macs.
    • Improved Preset Save and Restore function.
    • Improved operation in multi-frame setups.
    • "Graphite" color scheme added.

    Improved Multi-frame Support

    • Icon now supports up to 32 frames (more than 500 audio channels) controlled from one computer.

    Better Icon fader handling

    • TC Icon is now more tolerant of aging faders. Previous versions could accidentally edit values
    DB6 TC Icon Software Windows - Version 7.5 - 1.46 MB
    Released: Thursday, February 27, 2014
    DB6 TC Icon Software Mac - Version 7.5 - 4.41 MB
    Released: Thursday, February 27, 2014
    DB6 TC Icon Software Hardware Icon - Version 7.5 - 1.45 MB
    Released: Thursday, February 27, 2014
    + Show previous versions - Hide previous versions
    DB6 TC Icon Software Windows - Version 7.3 - 2.87 MB
    Released: Wednesday, January 22, 2014
    DB6 TC Icon Software Mac - Version 7.3 - 4.34 MB
    Released: Wednesday, January 22, 2014
    DB6 TC Icon Software Windows - Version 7.02 - 1.35 MB
    Released: Wednesday, October 09, 2013
    DB6 TC Icon Software Mac - Version 7.02 - 4.01 MB
    Released: Wednesday, October 09, 2013
    DB6 TC Icon Software Windows & Mac - Version 6.20 - 4.68 MB
    Released: Monday, November 01, 2010
    + Update instructions - Update instructions

    Below you can download the latest software for System 6000 frames (Reverb 6000 and Mastering 6000). Reverb 6000 MKII and Mastering 6000 MKII need software version 5 or higher. Don't try to load these versions on MKII frames.

    ICON EDITOR FOR PC

    • If you already have Icon installed, and wish to keep it, change its name to e.g. "Icon 390" before downloading the latest version.
    • Download the Icon Editor for Windows, and double click to un-zip.
    • Double-click the "Icon.cab" file inside the zip to install.
    • Note: If you rely on preset-management from your computer, make sure to verify that preset-banks are successfully stored and retrieved from System 6000 in your specific setup (computer OS, computer hardware, routers etc.)
    • Make sure to back-up presets to PCMCIA and/or floppy until you have verified computer back-up after every update of PC or Mac OS components.

    ICON EDITOR FOR MAC

    • The software is compatible with Mac OSX running on PowerPC as well as Intel platforms.
    • If you already have Icon installed, and wish to keep it, change its name to e.g. "Icon 390" before downloading the latest version.
    • Download the Icon Editor for Mac, and double click to install it.
    • Note: If you rely on preset-management from your computer, make sure to verify that preset-banks are successfully stored and retrieved from System 6000 in your specific setup (computer OS, computer hardware, routers etc.)
    • Make sure to back-up presets to PCMCIA and/or floppy until you have verified computer back-up after every update of PC or Mac OS components.

    ICON EDITOR FOR TC ICON

    • System 6000 may be controlled from the dedicated TC Icon unit instead of a PC or a Mac.
    • If you're using TC Icon, download the Icon Editor for Windows, and double click to un-zip.
    • Copy the "Icon.cab" file inside the zip to a floppy disk. Do *not* un-zip or un-cab before doing so.
    • Power on the RemoteCPU.
    • The mainframe should already be on. If not, remove any floppy disk and power it.
    • Insert the floppy-disk with the Icon.cab file in the mainframe, and access the Setup/Update page on TC Icon.
    • Press the DETECT key in the oval box, and the big round button labeled UPDATE FROM "name of unit" when it appears.
    • Wait approximately 2 minutes while the software is loaded, after which TC Icon automatically restarts.

     

    1. SUCCESS?

    • Verify a successful software upgrade by checking the components of each DB frame used.
    • Revision numbers are display

Manuals

FAQ Knowledge Base articles