DB-2 Tech Specs
Digital Inputs and Outputs
|
Connectors |
 |
BNC (AES3-id, 75 ohm), RCA Phono (S/PDIF) |
|
Formats |
|
AES3-id (24 bit), S/PDIF (24 bit), EIAJ CP-340, IEC 958 |
|
Output Dither |
|
HPF TPDF dither 8-24 bit |
|
Word Clock Input |
|
BNC, 75 ohm, 0.6 to 10 Vpp |
|
Sample Rates |
|
32 kHz, 44.1 kHz, 48 kHz |
|
Processing Delay |
|
0.5 ms @ 48 kHz |
|
Additional Delay |
|
0-1000 ms, 24 bit at all sample rates |
|
Frequency Response DIO |
|
DC to 23.9 kHz ± 0.01 dB @ 48 kHz |
|
Processing Resolution |
|
48 bit fixed point |
|
Type |
|
Asynchronous |
|
Dynamic Range |
|
120 dB |
|
THD+N |
|
-106 dB 44.1 to 48 kHz @ 1 kHz, -2 dBFS |
|
Input Rate Range |
|
31 kHz to 49 kHz |
|
Connectors |
|
XLR balanced (pin 2 hot) |
|
Impedance |
|
20 kohm (balanced) |
|
Max. Input Level |
|
+28 dBu (balanced) |
|
Min Input Level (for 0 dBFS) |
|
4 dBu (balanced) |
|
A to D Conversion |
|
24 bit (1 bit, 128 times oversampling) |
|
A to D Delay |
|
0.8 ms @ 48 kHz |
|
Dynamic Range |
|
>103 dB (unweighted), >106 dB(A) |
|
THD |
|
-95 dB (0.0018 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu) |
|
Frequency Response |
|
10 Hz to 20 kHz: +0/-0.2 dB |
|
Crosstalk |
|
<-80 dB, 10 Hz to 20 kHz, typical –100 dB @ 1 kHz |
|
Connectors |
|
XLR balanced (pin 2 hot) |
|
By-pass |
|
Through relay |
|
Impedance |
|
40 ohm (balanced) |
|
Max. Output Level |
|
+26 dBu (balanced) |
|
Full Scale Output Range |
|
-4 dBu to +26 dBu (balanced) |
|
D to A Conversion |
|
24 bit (1 bit, 128 times oversampling) |
|
D to A Delay |
|
0.57 ms @ 48 kHz |
|
Dynamic Range |
|
>100 dB (unweighted), >104 dB(A) |
|
THD |
|
-86 dB (0.005 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu) |
|
Frequency Response |
|
10 Hz to 20 kHz: +0/-0.5 dB |
|
Crosstalk |
|
<-60 dB, 10 Hz to 20 kHz, typical –90 dB @ 1 kHz |
|
Complies With |
|
EN 55103-1 and EN 55103-2, FCC part 15 Class B, CISPR 22 Class B |
|
Certified To |
|
IEC 60065, EN 60065, UL60065 and CSA E60065, CSA FILE# 186633 |
|
Operating Temperature |
|
32° F to 122° F (0° C to 50° C) |
|
Storage Temperature |
|
-22° F to 167° F (-30° C to 70° C) |
|
Humidity |
|
Max. 90% non-condensing |
|
Connector |
|
PC Card, 68 pin type 1 cards |
|
Standards |
|
PCMCIA 2.0, JEIDA 4.0 |
|
Card Format |
|
Supports up to 2 MB SRAM |
|
RS232 |
|
9 Pin SUB-D (RS232 to USB cable included in box) |
|
GPI, Pedal, Fader |
|
1/4 inch phone jack |
|
Dimensions (W x H x D) |
|
19" x 1.75" x 8.2" (483 x 44 x 208 mm) |
|
Weight |
|
5.2 lb. (2.35 kg) |
|
Finish |
|
Anodized aluminum face. Plated and painted steel chassis development |
|
Backup Battery Life |
|
> 10 Years |
|
Mains Voltage |
|
100 to 240 VAC, 50 to 60 Hz - (auto-select) |
|
Power Consumption |
|
< 20W |
|
Warranty Parts and labor |
|
1 Year |
|
|
|
|
 |
Please fill out the fields marked in red
|
As an owner of a TC Electronic HD product, you are
entitled to receive HD Support at all times. No matter where you are based,
you can always contact our dedicated support team. Don't hesitate to get in touch
Read more
|
Radar Loudness Meter for Native DAWs
Our acclaimed radar display has long proven an efficient solution when upgrading audio production for broadcast, film and music from unsatisfactory peak level indicators to loudness-based metering. LM6 Radar Loudness Meter gives you direct access to this revolutionary meter whether you are using Media Composer, Final Cut Pro X, Pro Tools, Logic Pro, Nuendo, Wavelab, Sequoia, etc. on a Mac or PC and whether your productions are in mono, stereo or 5.1.
|
Click here to find a TC Electronic dealer near you |
More Power to The P2
Acclaimed P2 loudness correction and optimization processor is upgraded to include ITU-R BS.1770-2, EBU R128, ATSC A/85 and TR-B32 based signal handling.
|
J. Mark King
J. Mark King, broadcast mixer for the recent star-studded Annual Academy of Country Music Awards from the MGM Grand on Sunday May 18, depended upon a TC Electronic DB-8 Television Processor to automatically upmix his two-channel stereo music mixes into full 5.1-channel surround sound.
|
|
