Clock & Synchronization in System 6000
What is jitter, what causes it and how is it removed on System 6000?
Measurements comparing a conventional clock design to that of System 6000.
Synchronization in digital audio studios in general.
Christian G. Frandsen
This document will discuss the clock, synchronization and interface design of TC System 6000 and deal with several of the factors that must be considered when using a digital studio.
We will go through different aspects in this area e.g.
- What is jitter, what causes it and how is it removed on System 6000.
- Measurements comparing a conventional clock design to that of System 6000.
- Synchronization in digital audio studios in general.
The article is addressed to the users of System 6000 and other high-end digital studio equipment. It is meant to be a guide to an optimized digital studio setup. It is our experience that many of the problems in a digital setup can be solved by knowledge alone, so hopefully the document will help to answer some of the questions and to clear some of the typical misunderstandings relating to timing and clock generation.
|
|
