Broadcast Standards

There are numerous broadcast standards. Here is a complete overview, including details of each standard.

Many countries have already legislated in regard to compliance with specific broadcast standards, while others are still in the legislative process.

My default image

ITU BS.1770-3

In many ways, The International Telecommunication Union's BS.I 770 recommendation is global and one of the most important broadcast standards as many other standards are based on it.The ETU standard concerns Broadcast loudness and True-peak Level measurement, and the loudness part is based on an Leq measurement employing K-weighting, which is a specific frequency weighting developed by the Communications Research Centre (a federal research institute in Ottawa, Canada).This baseline method is relatively simple, but it is based on excessive listening tests and has been verified independently. The True-peak part of the standard was specified by AES SC-02-01.

As mentioned, many other broadcast standards are based on ITU BS.1770, Including ATSC A/85 (the US), EBU R128 (Europe), OP-59 (Australia) and TR-B32 (Japan).

In 2011, the recommendation was released in a revised version: ITU 65.1770-2 that employs a relative gate with regard to Program Loudness measurement, which was adopted from the R128 standard defined byThe European Broadcast Union (EBU).

In 2012, the recommendation was updated once again to become version BS.1770-3.

ITU BSA 770 published 2006

ITU BS.1770-2 published March 2011

ITU BS.1770-3 published August 2012

My default image

EBU R128

The P/LOUD group, which is part of The European Broadcasting Union (EBU), has defined the RI 28 standard based on ITU BS.1770. However, the group also added new tools such as a relative gate that ensures even more consistent loudness across genres and types of program material. Some of these tools have been implemented in the updated version of ITU's recommendation: ITU BS.1770-3.

Basically, the R128 standard builds on 4 tech documents: EBU Tech 3341, EBU Tech 3342, EBU Tech 3343 and EBU Tech 3344.

EBU Tech 3341

This document specifies loudness metering within the 8128 domain. Quite simply, a loudness meter is aDowed to use the 'EBU Mode' term if certain criteria are met First of all, three time scales must be available: Momentary (M), Short-term (5) and Integrated (0 - also referred to as Program Loudness My real-time live meter with EBU Mode must be able to display the three time scales, though not necessarily at the same time, and it must also be able to display the maximum value of the Momentary Loudness (reset when Program Loudness is being reset).

Momentary Loudness must be measured using a sliding time window of OA seconds, wh Ile Short-term Loudness must be measured using a sliding time window of 3 seconds. Program Loudness must be measured using a specific gating method that excludes measurements of parts dropping below a threshold of -10 LV relative to an ungated measurement of the same program material.

Further, a meter featuring EBU Mode must also be able to display IRA (loudness Range), which is a measurement of the variation of loudness on a macroscopic scale. This parameter is a supplemeni to the overall loudness measurement (ProgramLoudness).

The terms used for expressing the measurements are LU (Loudness Units) and LUFS, which is the same as LKIS (Loudness K-weighted Full Scale) used by other broadcast standards. The target loudness of EBU's 8128 standard is 23 WI-S. For in-depth specifications, please consult the original EBU Tech 3341 document.

EBU Tech 3342

This document specifies audio normalization based on loudness measurements as described in EBU Tech 3342. The average loudness level, or Program Loudness, should be used in combination with Maximum True-peak Level and Loudness Range (LRA) to correct program material in accordance to the RI28 specifications.

In essence, LRA is determined by analyzing the loudest and the softest parts of the program material. However, the lower percentile of 1096 is being ignored as is the upper percentile of 95% to avoid extreme events such as a single gunshot or long passages of silence to manipulate the overall result in an undesirably way.

For in-depth specifications, please consult the original EBU Tech 3342 document.

EBU Tech 3343

This document describes guidelines for production and implementation in accordance with EBU R128. Both Program Loudness, LRA and True-peak metering is explained and strategies for implementing a loudness strategy at various stages of production are offered.

For in-depth specifications, please consult the original EBU Tech 3343 document

EBU Tech 3344

This document describes how to loudness normalize when distributing program material to various end user platforms, including radio, television and portable devices in various formats such as stereo and 5.1 surround.

For in-depth specifications, please consult the original EBU Tech 3344 document.

Published August 2010

My default image


ATSC A/85 was specified byThe Advanced Television Systems Committee in 2009 and applies to US broadcast digital television. N85 is rooted in the ITU-R BS.1770 Loudness and True-peak level standard. It specifies anchor based normalization for regular programs, but all-source loudness normalization for commercials and interstitials, both at a default Target loudness of -24 LKFS. Put differently, regular programs are under a liberal, rubber-band rule, while the level of commercials is defined precisely and transparently.

A/85 includes extensive information about calibrated monitoring environments and may function somewhat like a Dolby manual. Unlike EBU R128, A/85 is only focused on the digital television platform and on the AC3 codec.

In 2011, to give the CALM Act a chance of becoming effective, two revision were published, calling for the inclusion of all sources when measuring commercials, i.e. measuring loudness rather than speech. In the original version of A/85, only the 'anchor method was recognized. Even though the 2011 revisions were published after ITU had defined BS.1770-2, the ATSC standards ambiguously pointed to BS.I 770-1, which was then no longer in effect.

From March 2013, this ambiguity has gone, because the A/85 recommended practice now prescribes ITU BS.1770-3 for all programming. Hopefully, the proprietary speech detecting measurement algorithm ATSC has come to rely on will be updated accordingly before long.

My default image


11:2-832 is a Japanese broadcast standard that builds on ITU BSI 770-2, which means that a relative gate is employed. However, the target level is -24 LUFS/LKFS as opposed to the -23 LUFS target level of the EBU R128 standard which also employs the gate. As a rule of thumb, a gated measurement of -23 LUFS/LKFS equals an un-gated measurement of -24 LUFS/LKFS.

My default image


Operational practice by FreeTV, Australia. OP-59 is rooted in BS.1770 Loudness and True-peak level and recommends a speech based as well as a universal approach to audio normalization. NI short form programs should be measured using the universal (full mix) method.

Some of our Broadcast & Production Users Across the Globe

My default image