NEW FEATURES:

In Level, Global Out Level and Preset Out Level
We have added a Mapping Response Curve to the three level parameters the Mod Menu. This will make you able to define your own curve to the "In Level", "Global Out Level" and "Preset Out Level" parameters. This gives highly added value when using an Expression pedal to control one or more of these parameters.

External control of EQ and Noise Gate On/Off added
The Noise Gate and EQ blocks can now also be switched On/Off either via a MIDI CC message sent from your MIDI board or via a momentary pedal connected to the External Control In.

Level at "Bypass All" has been changed to be equal with Preset Output Level
This way the Output level is kept according to the set Preset Output Level also when the G-Major is bypassed.

Gain Parameter added to the Compressor
In many cases the Compressor will reduce the signal level. G-Major has a built in Auto Makeup Gain to compensate for this. On request we have now added a regular Gain parameter also.

Kill Dry Parameter
To get full benifit of all effect blocks the G-Major should be used in a serial loop. However, some amps or setups uses parallel loops. To achieve the best performance in these setups the new added Kill-Dry parameter muting the Dry signal on the Outputs, should be used.

The Pitch detection for the Tuner is now positioned before the Input Level control
This means that the Tuner works perfectly even if your expression pedal controlling the Input Level is turned down.
Independend level control of the two voices in the pitch section
The Pitch Shifter in the Pitch block features two voices. It is now possible to set individual Levels on the two voices.

Bugfixes:
- Fixed issue with DRAM timing.
- Small bugs fixed in the Reverb filters.
- The digital Input now works when you set G-Major to "Digital In" and "Internal Clock".
- Bug in Switch Input solved.
- Momentary switch now also works with Preset Boost.
- Global Input Level control has been moved to after the Noise Gate.

Top